Read the Docs build information Build id: 955416 Project: cloudferro-waw3-1-kubernetes-test Version: latest Commit: c36922380096b300d347fc840e3c9f8053f1427f Date: 2022-05-22T05:28:20.184922Z State: finished Success: True [rtd-command-info] start-time: 2022-05-22T05:28:22.151586Z, end-time: 2022-05-22T05:28:23.283580Z, duration: 1, exit-code: 0 git clone --no-single-branch --depth 50 git@github.com:CloudFerro/waw3-1-kubernetes-test.git . Cloning into '.'... Warning: Permanently added 'github.com,192.30.255.113' (ECDSA) to the list of known hosts. [rtd-command-info] start-time: 2022-05-22T05:28:23.658218Z, end-time: 2022-05-22T05:28:23.743631Z, duration: 0, exit-code: 0 git checkout --force origin/main Note: switching to 'origin/main'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at c369223 Update conf.py [rtd-command-info] start-time: 2022-05-22T05:28:23.943081Z, end-time: 2022-05-22T05:28:24.007540Z, duration: 0, exit-code: 0 git clean -d -f -f [rtd-command-info] start-time: 2022-05-22T05:28:24.972877Z, end-time: 2022-05-22T05:28:29.580562Z, duration: 4, exit-code: 0 python3.7 -mvirtualenv Using base prefix '/home/docs/.pyenv/versions/3.7.9' New python executable in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/bin/python3.7 Also creating executable in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/bin/python Installing setuptools, pip, wheel... done. [rtd-command-info] start-time: 2022-05-22T05:28:29.793488Z, end-time: 2022-05-22T05:28:31.696385Z, duration: 1, exit-code: 0 python -m pip install --upgrade --no-cache-dir pip setuptools<58.3.0 Requirement already satisfied: pip in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (22.1.1) Collecting setuptools<58.3.0 Downloading setuptools-58.2.0-py3-none-any.whl (946 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 946.1/946.1 kB 13.6 MB/s eta 0:00:00 Installing collected packages: setuptools Attempting uninstall: setuptools Found existing installation: setuptools 62.3.2 Uninstalling setuptools-62.3.2: Successfully uninstalled setuptools-62.3.2 Successfully installed setuptools-58.2.0 [rtd-command-info] start-time: 2022-05-22T05:28:31.923622Z, end-time: 2022-05-22T05:28:40.329097Z, duration: 8, exit-code: 0 python -m pip install --upgrade --no-cache-dir mock==1.0.1 pillow==5.4.1 alabaster>=0.7,<0.8,!=0.7.5 commonmark==0.8.1 recommonmark==0.5.0 sphinx sphinx-rtd-theme readthedocs-sphinx-ext<2.2 Collecting mock==1.0.1 Downloading mock-1.0.1.zip (861 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 861.9/861.9 kB 31.3 MB/s eta 0:00:00 Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting pillow==5.4.1 Downloading Pillow-5.4.1-cp37-cp37m-manylinux1_x86_64.whl (2.0 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.0/2.0 MB 195.8 MB/s eta 0:00:00 Collecting alabaster!=0.7.5,<0.8,>=0.7 Downloading alabaster-0.7.12-py2.py3-none-any.whl (14 kB) Collecting commonmark==0.8.1 Downloading commonmark-0.8.1-py2.py3-none-any.whl (47 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 47.4/47.4 kB 180.3 MB/s eta 0:00:00 Collecting recommonmark==0.5.0 Downloading recommonmark-0.5.0-py2.py3-none-any.whl (9.8 kB) Collecting sphinx Downloading Sphinx-4.5.0-py3-none-any.whl (3.1 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.1/3.1 MB 212.5 MB/s eta 0:00:00 Collecting sphinx-rtd-theme Downloading sphinx_rtd_theme-1.0.0-py2.py3-none-any.whl (2.8 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.8/2.8 MB 203.8 MB/s eta 0:00:00 Collecting readthedocs-sphinx-ext<2.2 Downloading readthedocs_sphinx_ext-2.1.6-py2.py3-none-any.whl (11 kB) Collecting future Downloading future-0.18.2.tar.gz (829 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 829.2/829.2 kB 244.6 MB/s eta 0:00:00 Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting docutils>=0.11 Downloading docutils-0.18.1-py2.py3-none-any.whl (570 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 570.0/570.0 kB 237.3 MB/s eta 0:00:00 Collecting babel>=1.3 Downloading Babel-2.10.1-py3-none-any.whl (9.5 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 9.5/9.5 MB 198.3 MB/s eta 0:00:00 Collecting sphinxcontrib-jsmath Downloading sphinxcontrib_jsmath-1.0.1-py2.py3-none-any.whl (5.1 kB) Collecting Pygments>=2.0 Downloading Pygments-2.12.0-py3-none-any.whl (1.1 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.1/1.1 MB 239.4 MB/s eta 0:00:00 Collecting snowballstemmer>=1.1 Downloading snowballstemmer-2.2.0-py2.py3-none-any.whl (93 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 93.0/93.0 kB 212.1 MB/s eta 0:00:00 Collecting Jinja2>=2.3 Downloading Jinja2-3.1.2-py3-none-any.whl (133 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 133.1/133.1 kB 225.2 MB/s eta 0:00:00 Collecting requests>=2.5.0 Downloading requests-2.27.1-py2.py3-none-any.whl (63 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 63.1/63.1 kB 187.2 MB/s eta 0:00:00 Collecting importlib-metadata>=4.4 Downloading importlib_metadata-4.11.4-py3-none-any.whl (18 kB) Collecting docutils>=0.11 Downloading docutils-0.17.1-py2.py3-none-any.whl (575 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 575.5/575.5 kB 235.6 MB/s eta 0:00:00 Collecting packaging Downloading packaging-21.3-py3-none-any.whl (40 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 40.8/40.8 kB 147.2 MB/s eta 0:00:00 Collecting imagesize Downloading imagesize-1.3.0-py2.py3-none-any.whl (5.2 kB) Collecting sphinxcontrib-applehelp Downloading sphinxcontrib_applehelp-1.0.2-py2.py3-none-any.whl (121 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 121.2/121.2 kB 215.1 MB/s eta 0:00:00 Collecting sphinxcontrib-qthelp Downloading sphinxcontrib_qthelp-1.0.3-py2.py3-none-any.whl (90 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 90.6/90.6 kB 213.6 MB/s eta 0:00:00 Collecting sphinxcontrib-serializinghtml>=1.1.5 Downloading sphinxcontrib_serializinghtml-1.1.5-py2.py3-none-any.whl (94 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 94.0/94.0 kB 203.3 MB/s eta 0:00:00 Collecting sphinxcontrib-htmlhelp>=2.0.0 Downloading sphinxcontrib_htmlhelp-2.0.0-py2.py3-none-any.whl (100 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 100.5/100.5 kB 209.6 MB/s eta 0:00:00 Collecting sphinxcontrib-devhelp Downloading sphinxcontrib_devhelp-1.0.2-py2.py3-none-any.whl (84 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 84.7/84.7 kB 206.4 MB/s eta 0:00:00 Collecting pytz>=2015.7 Downloading pytz-2022.1-py2.py3-none-any.whl (503 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 503.5/503.5 kB 239.8 MB/s eta 0:00:00 Collecting typing-extensions>=3.6.4 Downloading typing_extensions-4.2.0-py3-none-any.whl (24 kB) Collecting zipp>=0.5 Downloading zipp-3.8.0-py3-none-any.whl (5.4 kB) Collecting MarkupSafe>=2.0 Downloading MarkupSafe-2.1.1-cp37-cp37m-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (25 kB) Collecting certifi>=2017.4.17 Downloading certifi-2022.5.18.1-py3-none-any.whl (155 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 155.2/155.2 kB 226.8 MB/s eta 0:00:00 Collecting idna<4,>=2.5 Downloading idna-3.3-py3-none-any.whl (61 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 61.2/61.2 kB 198.0 MB/s eta 0:00:00 Collecting urllib3<1.27,>=1.21.1 Downloading urllib3-1.26.9-py2.py3-none-any.whl (138 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 139.0/139.0 kB 217.1 MB/s eta 0:00:00 Collecting charset-normalizer~=2.0.0 Downloading charset_normalizer-2.0.12-py3-none-any.whl (39 kB) Collecting pyparsing!=3.0.5,>=2.0.2 Downloading pyparsing-3.0.9-py3-none-any.whl (98 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 98.3/98.3 kB 212.0 MB/s eta 0:00:00 Building wheels for collected packages: mock, future Building wheel for mock (setup.py): started Building wheel for mock (setup.py): finished with status 'done' Created wheel for mock: filename=mock-1.0.1-py3-none-any.whl size=23773 sha256=4151d1888ed8ca5950dc3595b3dc15f06ce02c972f430bd4d882cf83298a29d4 Stored in directory: /tmp/pip-ephem-wheel-cache-q5g_n7y6/wheels/7a/94/b1/0fdc5339a5bd487a5cc15421ec200d9ba3e2aa7190e4a727f1 Building wheel for future (setup.py): started Building wheel for future (setup.py): finished with status 'done' Created wheel for future: filename=future-0.18.2-py3-none-any.whl size=491070 sha256=e69854cfdba782b635e392898b4111238003e88750be8728e5d35ae52911ff25 Stored in directory: /tmp/pip-ephem-wheel-cache-q5g_n7y6/wheels/56/b0/fe/4410d17b32f1f0c3cf54cdfb2bc04d7b4b8f4ae377e2229ba0 Successfully built mock future Installing collected packages: snowballstemmer, pytz, mock, alabaster, zipp, urllib3, typing-extensions, sphinxcontrib-serializinghtml, sphinxcontrib-qthelp, sphinxcontrib-jsmath, sphinxcontrib-htmlhelp, sphinxcontrib-devhelp, sphinxcontrib-applehelp, pyparsing, Pygments, pillow, MarkupSafe, imagesize, idna, future, docutils, charset-normalizer, certifi, babel, requests, packaging, Jinja2, importlib-metadata, commonmark, sphinx, readthedocs-sphinx-ext, sphinx-rtd-theme, recommonmark Successfully installed Jinja2-3.1.2 MarkupSafe-2.1.1 Pygments-2.12.0 alabaster-0.7.12 babel-2.10.1 certifi-2022.5.18.1 charset-normalizer-2.0.12 commonmark-0.8.1 docutils-0.17.1 future-0.18.2 idna-3.3 imagesize-1.3.0 importlib-metadata-4.11.4 mock-1.0.1 packaging-21.3 pillow-5.4.1 pyparsing-3.0.9 pytz-2022.1 readthedocs-sphinx-ext-2.1.6 recommonmark-0.5.0 requests-2.27.1 snowballstemmer-2.2.0 sphinx-4.5.0 sphinx-rtd-theme-1.0.0 sphinxcontrib-applehelp-1.0.2 sphinxcontrib-devhelp-1.0.2 sphinxcontrib-htmlhelp-2.0.0 sphinxcontrib-jsmath-1.0.1 sphinxcontrib-qthelp-1.0.3 sphinxcontrib-serializinghtml-1.1.5 typing-extensions-4.2.0 urllib3-1.26.9 zipp-3.8.0 [rtd-command-info] start-time: 2022-05-22T05:28:40.522489Z, end-time: 2022-05-22T05:28:47.695937Z, duration: 7, exit-code: 0 python -m pip install --exists-action=w --no-cache-dir -r requirements.txt Requirement already satisfied: alabaster==0.7.12 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 1)) (0.7.12) Collecting Babel==2.9.1 Downloading Babel-2.9.1-py2.py3-none-any.whl (8.8 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 8.8/8.8 MB 108.3 MB/s eta 0:00:00 Collecting certifi==2021.10.8 Downloading certifi-2021.10.8-py2.py3-none-any.whl (149 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 149.2/149.2 kB 223.4 MB/s eta 0:00:00 Collecting cffi==1.15.0 Downloading cffi-1.15.0-cp37-cp37m-manylinux_2_12_x86_64.manylinux2010_x86_64.whl (427 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 427.1/427.1 kB 246.2 MB/s eta 0:00:00 Requirement already satisfied: charset-normalizer==2.0.12 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 5)) (2.0.12) Collecting colorama==0.4.4 Downloading colorama-0.4.4-py2.py3-none-any.whl (16 kB) Collecting Deprecated==1.2.13 Downloading Deprecated-1.2.13-py2.py3-none-any.whl (9.6 kB) Requirement already satisfied: docutils==0.17.1 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 8)) (0.17.1) Requirement already satisfied: idna==3.3 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 9)) (3.3) Requirement already satisfied: imagesize==1.3.0 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 10)) (1.3.0) Collecting importlib-metadata==4.11.3 Downloading importlib_metadata-4.11.3-py3-none-any.whl (18 kB) Collecting Jinja2==3.0.3 Downloading Jinja2-3.0.3-py3-none-any.whl (133 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 133.6/133.6 kB 226.5 MB/s eta 0:00:00 Collecting livereload==2.6.3 Downloading livereload-2.6.3.tar.gz (25 kB) Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Requirement already satisfied: MarkupSafe==2.1.1 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 14)) (2.1.1) Requirement already satisfied: packaging==21.3 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 15)) (21.3) Collecting pycparser==2.21 Downloading pycparser-2.21-py2.py3-none-any.whl (118 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 118.7/118.7 kB 220.3 MB/s eta 0:00:00 Collecting PyGithub==1.55 Downloading PyGithub-1.55-py3-none-any.whl (291 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 291.7/291.7 kB 241.0 MB/s eta 0:00:00 Collecting Pygments==2.11.2 Downloading Pygments-2.11.2-py3-none-any.whl (1.1 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.1/1.1 MB 245.7 MB/s eta 0:00:00 Collecting PyJWT==2.3.0 Downloading PyJWT-2.3.0-py3-none-any.whl (16 kB) Collecting PyNaCl==1.5.0 Downloading PyNaCl-1.5.0-cp36-abi3-manylinux_2_17_x86_64.manylinux2014_x86_64.manylinux_2_24_x86_64.whl (856 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 856.7/856.7 kB 251.5 MB/s eta 0:00:00 Collecting pyparsing==3.0.7 Downloading pyparsing-3.0.7-py3-none-any.whl (98 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 98.0/98.0 kB 206.8 MB/s eta 0:00:00 Collecting pytz==2021.3 Downloading pytz-2021.3-py2.py3-none-any.whl (503 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 503.5/503.5 kB 245.5 MB/s eta 0:00:00 Requirement already satisfied: requests==2.27.1 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 23)) (2.27.1) Collecting six==1.16.0 Downloading six-1.16.0-py2.py3-none-any.whl (11 kB) Requirement already satisfied: snowballstemmer==2.2.0 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 25)) (2.2.0) Collecting Sphinx==4.4.0 Downloading Sphinx-4.4.0-py3-none-any.whl (3.1 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.1/3.1 MB 211.5 MB/s eta 0:00:00 Collecting sphinx-autobuild==2021.3.14 Downloading sphinx_autobuild-2021.3.14-py3-none-any.whl (9.9 kB) Requirement already satisfied: sphinx-rtd-theme==1.0.0 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 28)) (1.0.0) Collecting sphinx_substitution_extensions==2022.2.16 Downloading Sphinx_Substitution_Extensions-2022.2.16-py3-none-any.whl (9.8 kB) Requirement already satisfied: sphinxcontrib-applehelp==1.0.2 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 30)) (1.0.2) Requirement already satisfied: sphinxcontrib-devhelp==1.0.2 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 31)) (1.0.2) Requirement already satisfied: sphinxcontrib-htmlhelp==2.0.0 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 32)) (2.0.0) Requirement already satisfied: sphinxcontrib-jsmath==1.0.1 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 33)) (1.0.1) Requirement already satisfied: sphinxcontrib-qthelp==1.0.3 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 34)) (1.0.3) Requirement already satisfied: sphinxcontrib-serializinghtml==1.1.5 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 35)) (1.1.5) Collecting tornado==6.1 Downloading tornado-6.1-cp37-cp37m-manylinux2010_x86_64.whl (428 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 428.5/428.5 kB 248.9 MB/s eta 0:00:00 Requirement already satisfied: urllib3==1.26.9 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 37)) (1.26.9) Collecting wrapt==1.14.0 Downloading wrapt-1.14.0-cp37-cp37m-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl (75 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 75.2/75.2 kB 179.5 MB/s eta 0:00:00 Collecting zipp==3.7.0 Downloading zipp-3.7.0-py3-none-any.whl (5.3 kB) Requirement already satisfied: typing-extensions>=3.6.4 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from importlib-metadata==4.11.3->-r requirements.txt (line 11)) (4.2.0) Building wheels for collected packages: livereload Building wheel for livereload (setup.py): started Building wheel for livereload (setup.py): finished with status 'done' Created wheel for livereload: filename=livereload-2.6.3-py2.py3-none-any.whl size=24724 sha256=d3029b7f013d69bc69d3b6f17588d2059ae2e5582563ea6d61eb48ecb2457656 Stored in directory: /tmp/pip-ephem-wheel-cache-pew9m4s3/wheels/d4/f2/03/55f37093eb8cb0c89d7efb206f792dba55cd5bd67b1c5b1ce1 Successfully built livereload Installing collected packages: pytz, certifi, zipp, wrapt, tornado, six, pyparsing, PyJWT, Pygments, pycparser, Jinja2, colorama, Babel, livereload, importlib-metadata, Deprecated, cffi, Sphinx, PyNaCl, sphinx_substitution_extensions, sphinx-autobuild, PyGithub Attempting uninstall: pytz Found existing installation: pytz 2022.1 Uninstalling pytz-2022.1: Successfully uninstalled pytz-2022.1 Attempting uninstall: certifi Found existing installation: certifi 2022.5.18.1 Uninstalling certifi-2022.5.18.1: Successfully uninstalled certifi-2022.5.18.1 Attempting uninstall: zipp Found existing installation: zipp 3.8.0 Uninstalling zipp-3.8.0: Successfully uninstalled zipp-3.8.0 Attempting uninstall: pyparsing Found existing installation: pyparsing 3.0.9 Uninstalling pyparsing-3.0.9: Successfully uninstalled pyparsing-3.0.9 Attempting uninstall: Pygments Found existing installation: Pygments 2.12.0 Uninstalling Pygments-2.12.0: Successfully uninstalled Pygments-2.12.0 Attempting uninstall: Jinja2 Found existing installation: Jinja2 3.1.2 Uninstalling Jinja2-3.1.2: Successfully uninstalled Jinja2-3.1.2 Attempting uninstall: Babel Found existing installation: Babel 2.10.1 Uninstalling Babel-2.10.1: Successfully uninstalled Babel-2.10.1 Attempting uninstall: importlib-metadata Found existing installation: importlib-metadata 4.11.4 Uninstalling importlib-metadata-4.11.4: Successfully uninstalled importlib-metadata-4.11.4 Attempting uninstall: Sphinx Found existing installation: Sphinx 4.5.0 Uninstalling Sphinx-4.5.0: Successfully uninstalled Sphinx-4.5.0 Successfully installed Babel-2.9.1 Deprecated-1.2.13 Jinja2-3.0.3 PyGithub-1.55 PyJWT-2.3.0 PyNaCl-1.5.0 Pygments-2.11.2 Sphinx-4.4.0 certifi-2021.10.8 cffi-1.15.0 colorama-0.4.4 importlib-metadata-4.11.3 livereload-2.6.3 pycparser-2.21 pyparsing-3.0.7 pytz-2021.3 six-1.16.0 sphinx-autobuild-2021.3.14 sphinx_substitution_extensions-2022.2.16 tornado-6.1 wrapt-1.14.0 zipp-3.7.0 [rtd-command-info] start-time: 2022-05-22T05:28:49.137780Z, end-time: 2022-05-22T05:28:49.205903Z, duration: 0, exit-code: 0 cat source/conf.py # Configuration file for the Sphinx documentation builder. # # This file only contains a selection of the most common options. For a full # list see the documentation: # https://www.sphinx-doc.org/en/master/usage/configuration.html # -- Path setup -------------------------------------------------------------- # If extensions (or modules to document with autodoc) are in another directory, # add these directories to sys.path here. If the directory is relative to the # documentation root, use os.path.abspath to make it absolute, like shown here. # # import os # import sys # sys.path.insert(0, os.path.abspath('.')) from get_rst_files import get_files # -- Project information ----------------------------------------------------- project = "Eumetsat" copyright = "2022, CloudFerro" author = "CloudFerro" # The full version, including alpha/beta/rc tags release = "0.0.1" # -- General configuration --------------------------------------------------- # Add any Sphinx extension module names here, as strings. They can be # extensions coming with Sphinx (named 'sphinx.ext.*') or your custom # ones. extensions = ['sphinx_substitution_extensions'] rst_prolog = """ .. |brand-name| replace:: Eumetsat Elasticity .. |brand-name-hyphen| replace:: Eumetsat-Elasticity """ # Add any paths that contain templates here, relative to this directory. templates_path = ["_templates"] # List of patterns, relative to source directory, that match files and # directories to ignore when looking for source files. # This pattern also affects html_static_path and html_extra_path. exclude_patterns = [] urls_dict = get_files( { "networking": [ "https://github.com/CloudFerro/waw3-1-kubernetes-test/tree/main/source/networking", "https://github.com/CloudFerro/cf3-doc/blob/main/source/networking/vpnaas", ], } ) html_context = { "display_github": True, "urls_dict": urls_dict, "github_host": "github.com", "github_user": "CloudFerro", "github_repo": "waw3-1-kubernetes-test", "github_version": "main", "conf_py_path": "/source/", "source_suffix": ".rst", } # -- Options for HTML output ------------------------------------------------- # The theme to use for HTML and HTML Help pages. See the documentation for # a list of builtin themes. # html_theme = "sphinx_rtd_theme" # Add any paths that contain custom static files (such as style sheets) here, # relative to this directory. They are copied after the builtin static files, # so a file named "default.css" will overwrite the builtin "default.css". html_static_path = ["_static"] html_logo = "eumetsat_logo.png" html_theme_options = { 'logo_only': True, 'display_version': False, } html_css_files = [ 'css/custom.css', ] ########################################################################### # auto-created readthedocs.org specific configuration # ########################################################################### # # The following code was added during an automated build on readthedocs.org # It is auto created and injected for every build. The result is based on the # conf.py.tmpl file found in the readthedocs.org codebase: # https://github.com/rtfd/readthedocs.org/blob/main/readthedocs/doc_builder/templates/doc_builder/conf.py.tmpl # # Note: this file shouldn't rely on extra dependencies. import importlib import sys import os.path # Borrowed from six. PY3 = sys.version_info[0] == 3 string_types = str if PY3 else basestring from sphinx import version_info # Get suffix for proper linking to GitHub # This is deprecated in Sphinx 1.3+, # as each page can have its own suffix if globals().get('source_suffix', False): if isinstance(source_suffix, string_types): SUFFIX = source_suffix elif isinstance(source_suffix, (list, tuple)): # Sphinx >= 1.3 supports list/tuple to define multiple suffixes SUFFIX = source_suffix[0] elif isinstance(source_suffix, dict): # Sphinx >= 1.8 supports a mapping dictionary for multiple suffixes SUFFIX = list(source_suffix.keys())[0] # make a ``list()`` for py2/py3 compatibility else: # default to .rst SUFFIX = '.rst' else: SUFFIX = '.rst' # Add RTD Static Path. Add to the end because it overwrites previous files. if not 'html_static_path' in globals(): html_static_path = [] if os.path.exists('_static'): html_static_path.append('_static') # Add RTD Theme only if they aren't overriding it already using_rtd_theme = ( ( 'html_theme' in globals() and html_theme in ['default'] and # Allow people to bail with a hack of having an html_style 'html_style' not in globals() ) or 'html_theme' not in globals() ) if using_rtd_theme: theme = importlib.import_module('sphinx_rtd_theme') html_theme = 'sphinx_rtd_theme' html_style = None html_theme_options = {} if 'html_theme_path' in globals(): html_theme_path.append(theme.get_html_theme_path()) else: html_theme_path = [theme.get_html_theme_path()] if globals().get('websupport2_base_url', False): websupport2_base_url = 'https://readthedocs.com/websupport' websupport2_static_url = 'https://assets.readthedocs.com/' #Add project information to the template context. context = { 'using_theme': using_rtd_theme, 'html_theme': html_theme, 'current_version': "latest", 'version_slug': "latest", 'MEDIA_URL': "https://media.readthedocs.com/media/", 'STATIC_URL': "https://assets.readthedocs.com/", 'PRODUCTION_DOMAIN': "readthedocs.com", 'proxied_static_path': "/_/static/", 'versions': [ ("latest", "/en/latest/"), ], 'downloads': [ ("pdf", "//cloudferro-waw3-1-kubernetes-test.readthedocs-hosted.com/_/downloads/en/latest/pdf/"), ("html", "//cloudferro-waw3-1-kubernetes-test.readthedocs-hosted.com/_/downloads/en/latest/htmlzip/"), ("epub", "//cloudferro-waw3-1-kubernetes-test.readthedocs-hosted.com/_/downloads/en/latest/epub/"), ], 'subprojects': [ ], 'slug': 'cloudferro-waw3-1-kubernetes-test', 'name': u'waw3-1-kubernetes-test', 'rtd_language': u'en', 'programming_language': u'words', 'canonical_url': 'https://cloudferro-waw3-1-kubernetes-test.readthedocs-hosted.com/en/latest/', 'analytics_code': 'None', 'single_version': False, 'conf_py_path': '/source/', 'api_host': 'https://readthedocs.com', 'github_user': 'CloudFerro', 'proxied_api_host': '/_', 'github_repo': 'waw3-1-kubernetes-test', 'github_version': 'main', 'display_github': True, 'bitbucket_user': 'None', 'bitbucket_repo': 'None', 'bitbucket_version': 'main', 'display_bitbucket': False, 'gitlab_user': 'None', 'gitlab_repo': 'None', 'gitlab_version': 'main', 'display_gitlab': False, 'READTHEDOCS': True, 'using_theme': (html_theme == "default"), 'new_theme': (html_theme == "sphinx_rtd_theme"), 'source_suffix': SUFFIX, 'ad_free': False, 'docsearch_disabled': False, 'user_analytics_code': '', 'global_analytics_code': 'UA-17997319-2', 'commit': 'c3692238', } # For sphinx >=1.8 we can use html_baseurl to set the canonical URL. # https://www.sphinx-doc.org/en/master/usage/configuration.html#confval-html_baseurl if version_info >= (1, 8): if not globals().get('html_baseurl'): html_baseurl = context['canonical_url'] context['canonical_url'] = None if 'html_context' in globals(): html_context.update(context) else: html_context = context # Add custom RTD extension if 'extensions' in globals(): # Insert at the beginning because it can interfere # with other extensions. # See https://github.com/rtfd/readthedocs.org/pull/4054 extensions.insert(0, "readthedocs_ext.readthedocs") else: extensions = ["readthedocs_ext.readthedocs"] # Add External version warning banner to the external version documentation if 'branch' == 'external': extensions.insert(1, "readthedocs_ext.external_version_warning") readthedocs_vcs_url = 'None' readthedocs_build_url = 'https://readthedocs.com/projects/cloudferro-waw3-1-kubernetes-test/builds/955416/' project_language = 'en' # User's Sphinx configurations language_user = globals().get('language', None) latex_engine_user = globals().get('latex_engine', None) latex_elements_user = globals().get('latex_elements', None) # Remove this once xindy gets installed in Docker image and XINDYOPS # env variable is supported # https://github.com/rtfd/readthedocs-docker-images/pull/98 latex_use_xindy = False chinese = any([ language_user in ('zh_CN', 'zh_TW'), project_language in ('zh_CN', 'zh_TW'), ]) japanese = any([ language_user == 'ja', project_language == 'ja', ]) if chinese: latex_engine = latex_engine_user or 'xelatex' latex_elements_rtd = { 'preamble': '\\usepackage[UTF8]{ctex}\n', } latex_elements = latex_elements_user or latex_elements_rtd elif japanese: latex_engine = latex_engine_user or 'platex' # Make sure our build directory is always excluded exclude_patterns = globals().get('exclude_patterns', []) exclude_patterns.extend(['_build']) [rtd-command-info] start-time: 2022-05-22T05:28:49.443521Z, end-time: 2022-05-22T05:29:09.008665Z, duration: 19, exit-code: 0 python -m sphinx -T -E -b html -d _build/doctrees -D language=en . _build/html Running Sphinx v4.4.0 loading translations [en]... done making output directory... done building [mo]: targets for 0 po files that are out of date building [html]: targets for 9 source files that are out of date updating environment: [new config] 9 added, 0 changed, 0 removed reading sources... [ 11%] datavolume/datavolume reading sources... [ 22%] eodata/eodata reading sources... [ 33%] general/general reading sources... [ 44%] index reading sources... [ 55%] kubernetes/kubernetes reading sources... [ 66%] networking/networking reading sources... [ 77%] networking/vpnaas reading sources... [ 88%] openstackcli/openstackcli reading sources... [100%] s3/s3 /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/accessusings3cmd' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/attachvolumetovmlessthan2tb' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/cannotaccesseodata' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/ephemeralvspersistentstorage' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/exportvolumenfs' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/exportvolumeovernfs' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/extendvolumelinux' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/howmanyobjectsobjectstorage' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/howtoaccesseodata' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/howtomountdriveoverssh' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/mountobjectstoragelinux' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/moveadatavolume' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/volumesnapshotinheritanceanditsconsequences' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/volumesnapshot' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst:5: WARNING: toctree contains reference to nonexisting document 'eodata/accesslisteousingboto3' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst:5: WARNING: toctree contains reference to nonexisting document 'eodata/cantaccesseodata' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst:5: WARNING: toctree contains reference to nonexisting document 'eodata/downloadeodatausingboto3' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst:5: WARNING: toctree contains reference to nonexisting document 'eodata/eodataaccess' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst:5: WARNING: toctree contains reference to nonexisting document 'eodata/eodatagoofys' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst:5: WARNING: toctree contains reference to nonexisting document 'eodata/eodatas3fs' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst:5: WARNING: toctree contains reference to nonexisting document 'eodata/mounteodatausings3protocol' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst:5: WARNING: toctree contains reference to nonexisting document 'eodata/s3cmd-download' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-to-Create-a-Kubernetes-Cluster-Using-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-to-Create-a-Kubernetes-Cluster-Template-Using-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-To-Install-OpenStack-and-Magnum-Clients-for-Command-Line-Interface-to-Eumetsat-Elasticity-Horizon' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-To-Create-API-Server-LoadBalancer-for-Kubernetes-Cluster-On-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-To-Create-Floating-IP-for-Servers-on-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/Creating-Additional-Nodegroups-in-Kubernetes-Cluster-on-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/Autoscaling-Kubernetes-Cluster-Resources-on-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-to-Connect-Two-Instances-Through-a-Private-Network-on-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-To-Create-and-Manage-Networks-on-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-to-Create-a-Router-on-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-to-Use-Security-Groups-to-Tighten-Security-Using-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-to-Create-and-Return-a-Floating-IP-Address-on-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/Volume-based-vs-Ephemeral-based-Storage-for-Kubernetes-Clusters-on-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-To-Install-Shared-File-System-On-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/openstackcli/openstackcli.rst:5: WARNING: toctree contains reference to nonexisting document 'openstackcli/backupaninstance' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/openstackcli/openstackcli.rst:5: WARNING: toctree contains reference to nonexisting document 'openstackcli/createasetofvms' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/openstackcli/openstackcli.rst:5: WARNING: toctree contains reference to nonexisting document 'openstackcli/newprojectopenstack' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/openstackcli/openstackcli.rst:5: WARNING: toctree contains reference to nonexisting document 'openstackcli/openstacklinux' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3/s3.rst:4: WARNING: toctree contains reference to nonexisting document 's3/deletelargebucket' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3/s3.rst:4: WARNING: toctree contains reference to nonexisting document 's3/mountobjectstorage' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3/s3.rst:4: WARNING: toctree contains reference to nonexisting document 's3/objectstorage' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3/s3.rst:4: WARNING: toctree contains reference to nonexisting document 's3/remotetransfer' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3/s3.rst:4: WARNING: toctree contains reference to nonexisting document 's3/s3fscache' looking for now-outdated files... none found pickling environment... done checking consistency... /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/general/general.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/openstackcli/openstackcli.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3/s3.rst: WARNING: document isn't included in any toctree done preparing documents... done writing output... [ 11%] datavolume/datavolume writing output... [ 22%] eodata/eodata writing output... [ 33%] general/general writing output... [ 44%] index writing output... [ 55%] kubernetes/kubernetes writing output... [ 66%] networking/networking writing output... [ 77%] networking/vpnaas writing output... [ 88%] openstackcli/openstackcli writing output... [100%] s3/s3 generating indices... genindex done writing additional pages... search done copying images... [ 3%] networking/scrn1.png copying images... [ 7%] networking/scrn2.png copying images... [ 10%] networking/scrn3.png copying images... [ 14%] networking/scrn4.png copying images... [ 17%] networking/scrn5.png copying images... [ 21%] networking/scrn6.png copying images... [ 25%] networking/scrn7.png copying images... [ 28%] networking/scrn8.png copying images... [ 32%] networking/scrn9.png copying images... [ 35%] networking/scrn10.png copying images... [ 39%] networking/scrn11.png copying images... [ 42%] networking/scrn12.png copying images... [ 46%] networking/scrn13.png copying images... [ 50%] networking/scrn141.png copying images... [ 53%] networking/scrn15.png copying images... [ 57%] networking/scrn16.png copying images... [ 60%] networking/scrn17.png copying images... [ 64%] networking/scrn18.png copying images... [ 67%] networking/scrn19.png copying images... [ 71%] networking/scrn20.png copying images... [ 75%] networking/scrn22.png copying images... [ 78%] networking/scrn23.png copying images... [ 82%] networking/scrn24.png copying images... [ 85%] networking/scrn261.png copying images... [ 89%] networking/scrn29.png copying images... [ 92%] networking/scrn27.png copying images... [ 96%] networking/scrn30.png copying images... [100%] networking/scrn28.png copying static files... done copying extra files... done dumping search index in English (code: en)... done dumping object inventory... done build succeeded, 53 warnings. The HTML pages are in _build/html. Updating searchtools for Read the Docs search... [rtd-command-info] start-time: 2022-05-22T05:29:09.338073Z, end-time: 2022-05-22T05:29:28.446070Z, duration: 19, exit-code: 0 python -m sphinx -T -E -b readthedocssinglehtmllocalmedia -d _build/doctrees -D language=en . _build/localmedia Running Sphinx v4.4.0 loading translations [en]... done making output directory... done building [mo]: targets for 0 po files that are out of date building [readthedocssinglehtmllocalmedia]: all documents updating environment: [new config] 9 added, 0 changed, 0 removed reading sources... [ 11%] datavolume/datavolume reading sources... [ 22%] eodata/eodata reading sources... [ 33%] general/general reading sources... [ 44%] index reading sources... [ 55%] kubernetes/kubernetes reading sources... [ 66%] networking/networking reading sources... [ 77%] networking/vpnaas reading sources... [ 88%] openstackcli/openstackcli reading sources... [100%] s3/s3 /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/accessusings3cmd' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/attachvolumetovmlessthan2tb' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/cannotaccesseodata' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/ephemeralvspersistentstorage' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/exportvolumenfs' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/exportvolumeovernfs' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/extendvolumelinux' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/howmanyobjectsobjectstorage' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/howtoaccesseodata' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/howtomountdriveoverssh' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/mountobjectstoragelinux' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/moveadatavolume' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/volumesnapshotinheritanceanditsconsequences' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/volumesnapshot' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst:5: WARNING: toctree contains reference to nonexisting document 'eodata/accesslisteousingboto3' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst:5: WARNING: toctree contains reference to nonexisting document 'eodata/cantaccesseodata' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst:5: WARNING: toctree contains reference to nonexisting document 'eodata/downloadeodatausingboto3' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst:5: WARNING: toctree contains reference to nonexisting document 'eodata/eodataaccess' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst:5: WARNING: toctree contains reference to nonexisting document 'eodata/eodatagoofys' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst:5: WARNING: toctree contains reference to nonexisting document 'eodata/eodatas3fs' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst:5: WARNING: toctree contains reference to nonexisting document 'eodata/mounteodatausings3protocol' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst:5: WARNING: toctree contains reference to nonexisting document 'eodata/s3cmd-download' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-to-Create-a-Kubernetes-Cluster-Using-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-to-Create-a-Kubernetes-Cluster-Template-Using-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-To-Install-OpenStack-and-Magnum-Clients-for-Command-Line-Interface-to-Eumetsat-Elasticity-Horizon' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-To-Create-API-Server-LoadBalancer-for-Kubernetes-Cluster-On-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-To-Create-Floating-IP-for-Servers-on-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/Creating-Additional-Nodegroups-in-Kubernetes-Cluster-on-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/Autoscaling-Kubernetes-Cluster-Resources-on-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-to-Connect-Two-Instances-Through-a-Private-Network-on-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-To-Create-and-Manage-Networks-on-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-to-Create-a-Router-on-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-to-Use-Security-Groups-to-Tighten-Security-Using-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-to-Create-and-Return-a-Floating-IP-Address-on-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/Volume-based-vs-Ephemeral-based-Storage-for-Kubernetes-Clusters-on-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-To-Install-Shared-File-System-On-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/openstackcli/openstackcli.rst:5: WARNING: toctree contains reference to nonexisting document 'openstackcli/backupaninstance' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/openstackcli/openstackcli.rst:5: WARNING: toctree contains reference to nonexisting document 'openstackcli/createasetofvms' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/openstackcli/openstackcli.rst:5: WARNING: toctree contains reference to nonexisting document 'openstackcli/newprojectopenstack' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/openstackcli/openstackcli.rst:5: WARNING: toctree contains reference to nonexisting document 'openstackcli/openstacklinux' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3/s3.rst:4: WARNING: toctree contains reference to nonexisting document 's3/deletelargebucket' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3/s3.rst:4: WARNING: toctree contains reference to nonexisting document 's3/mountobjectstorage' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3/s3.rst:4: WARNING: toctree contains reference to nonexisting document 's3/objectstorage' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3/s3.rst:4: WARNING: toctree contains reference to nonexisting document 's3/remotetransfer' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3/s3.rst:4: WARNING: toctree contains reference to nonexisting document 's3/s3fscache' looking for now-outdated files... none found pickling environment... done checking consistency... /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/general/general.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/openstackcli/openstackcli.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3/s3.rst: WARNING: document isn't included in any toctree done preparing documents... done assembling single document... networking/networking networking/vpnaas done writing... done writing additional files... done copying images... [ 3%] networking/scrn1.png copying images... [ 7%] networking/scrn2.png copying images... [ 10%] networking/scrn3.png copying images... [ 14%] networking/scrn4.png copying images... [ 17%] networking/scrn5.png copying images... [ 21%] networking/scrn6.png copying images... [ 25%] networking/scrn7.png copying images... [ 28%] networking/scrn8.png copying images... [ 32%] networking/scrn9.png copying images... [ 35%] networking/scrn10.png copying images... [ 39%] networking/scrn11.png copying images... [ 42%] networking/scrn12.png copying images... [ 46%] networking/scrn13.png copying images... [ 50%] networking/scrn141.png copying images... [ 53%] networking/scrn15.png copying images... [ 57%] networking/scrn16.png copying images... [ 60%] networking/scrn17.png copying images... [ 64%] networking/scrn18.png copying images... [ 67%] networking/scrn19.png copying images... [ 71%] networking/scrn20.png copying images... [ 75%] networking/scrn22.png copying images... [ 78%] networking/scrn23.png copying images... [ 82%] networking/scrn24.png copying images... [ 85%] networking/scrn261.png copying images... [ 89%] networking/scrn29.png copying images... [ 92%] networking/scrn27.png copying images... [ 96%] networking/scrn30.png copying images... [100%] networking/scrn28.png copying static files... done copying extra files... done dumping object inventory... done build succeeded, 53 warnings. The HTML page is in _build/localmedia. Updating searchtools for Read the Docs search... [rtd-command-info] start-time: 2022-05-22T05:29:28.670639Z, end-time: 2022-05-22T05:29:47.663795Z, duration: 18, exit-code: 0 python -m sphinx -b latex -D language=en -d _build/doctrees . _build/latex Running Sphinx v4.4.0 loading translations [en]... done making output directory... done loading pickled environment... done building [mo]: targets for 0 po files that are out of date building [latex]: all documents updating environment: 0 added, 7 changed, 0 removed reading sources... [ 14%] datavolume/datavolume reading sources... [ 28%] eodata/eodata reading sources... [ 42%] kubernetes/kubernetes reading sources... [ 57%] networking/networking reading sources... [ 71%] networking/vpnaas reading sources... [ 85%] openstackcli/openstackcli reading sources... [100%] s3/s3 /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/accessusings3cmd' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/attachvolumetovmlessthan2tb' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/cannotaccesseodata' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/ephemeralvspersistentstorage' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/exportvolumenfs' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/exportvolumeovernfs' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/extendvolumelinux' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/howmanyobjectsobjectstorage' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/howtoaccesseodata' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/howtomountdriveoverssh' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/mountobjectstoragelinux' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/moveadatavolume' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/volumesnapshotinheritanceanditsconsequences' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/volumesnapshot' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst:5: WARNING: toctree contains reference to nonexisting document 'eodata/accesslisteousingboto3' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst:5: WARNING: toctree contains reference to nonexisting document 'eodata/cantaccesseodata' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst:5: WARNING: toctree contains reference to nonexisting document 'eodata/downloadeodatausingboto3' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst:5: WARNING: toctree contains reference to nonexisting document 'eodata/eodataaccess' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst:5: WARNING: toctree contains reference to nonexisting document 'eodata/eodatagoofys' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst:5: WARNING: toctree contains reference to nonexisting document 'eodata/eodatas3fs' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst:5: WARNING: toctree contains reference to nonexisting document 'eodata/mounteodatausings3protocol' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst:5: WARNING: toctree contains reference to nonexisting document 'eodata/s3cmd-download' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-to-Create-a-Kubernetes-Cluster-Using-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-to-Create-a-Kubernetes-Cluster-Template-Using-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-To-Install-OpenStack-and-Magnum-Clients-for-Command-Line-Interface-to-Eumetsat-Elasticity-Horizon' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-To-Create-API-Server-LoadBalancer-for-Kubernetes-Cluster-On-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-To-Create-Floating-IP-for-Servers-on-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/Creating-Additional-Nodegroups-in-Kubernetes-Cluster-on-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/Autoscaling-Kubernetes-Cluster-Resources-on-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-to-Connect-Two-Instances-Through-a-Private-Network-on-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-To-Create-and-Manage-Networks-on-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-to-Create-a-Router-on-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-to-Use-Security-Groups-to-Tighten-Security-Using-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-to-Create-and-Return-a-Floating-IP-Address-on-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/Volume-based-vs-Ephemeral-based-Storage-for-Kubernetes-Clusters-on-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-To-Install-Shared-File-System-On-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/openstackcli/openstackcli.rst:5: WARNING: toctree contains reference to nonexisting document 'openstackcli/backupaninstance' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/openstackcli/openstackcli.rst:5: WARNING: toctree contains reference to nonexisting document 'openstackcli/createasetofvms' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/openstackcli/openstackcli.rst:5: WARNING: toctree contains reference to nonexisting document 'openstackcli/newprojectopenstack' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/openstackcli/openstackcli.rst:5: WARNING: toctree contains reference to nonexisting document 'openstackcli/openstacklinux' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3/s3.rst:4: WARNING: toctree contains reference to nonexisting document 's3/deletelargebucket' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3/s3.rst:4: WARNING: toctree contains reference to nonexisting document 's3/mountobjectstorage' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3/s3.rst:4: WARNING: toctree contains reference to nonexisting document 's3/objectstorage' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3/s3.rst:4: WARNING: toctree contains reference to nonexisting document 's3/remotetransfer' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3/s3.rst:4: WARNING: toctree contains reference to nonexisting document 's3/s3fscache' looking for now-outdated files... none found pickling environment... done checking consistency... /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/general/general.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/openstackcli/openstackcli.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3/s3.rst: WARNING: document isn't included in any toctree done processing eumetsat.tex... index networking/networking networking/vpnaas resolving references... done writing... done copying images... [ 3%] networking/scrn1.png copying images... [ 7%] networking/scrn2.png copying images... [ 10%] networking/scrn3.png copying images... [ 14%] networking/scrn4.png copying images... [ 17%] networking/scrn5.png copying images... [ 21%] networking/scrn6.png copying images... [ 25%] networking/scrn7.png copying images... [ 28%] networking/scrn8.png copying images... [ 32%] networking/scrn9.png copying images... [ 35%] networking/scrn10.png copying images... [ 39%] networking/scrn11.png copying images... [ 42%] networking/scrn12.png copying images... [ 46%] networking/scrn13.png copying images... [ 50%] networking/scrn141.png copying images... [ 53%] networking/scrn15.png copying images... [ 57%] networking/scrn16.png copying images... [ 60%] networking/scrn17.png copying images... [ 64%] networking/scrn18.png copying images... [ 67%] networking/scrn19.png copying images... [ 71%] networking/scrn20.png copying images... [ 75%] networking/scrn22.png copying images... [ 78%] networking/scrn23.png copying images... [ 82%] networking/scrn24.png copying images... [ 85%] networking/scrn261.png copying images... [ 89%] networking/scrn29.png copying images... [ 92%] networking/scrn27.png copying images... [ 96%] networking/scrn30.png copying images... [100%] networking/scrn28.png copying TeX support files... copying TeX support files... done build succeeded, 53 warnings. The LaTeX files are in _build/latex. Run 'make' in that directory to run these through (pdf)latex (use `make latexpdf' here to do that automatically). WARNING: Missing searchtools: /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/_build/latex/_static/searchtools.js [rtd-command-info] start-time: 2022-05-22T05:29:53.063514Z, end-time: 2022-05-22T05:29:53.132036Z, duration: 0, exit-code: 0 cat latexmkrc $latex = 'latex ' . $ENV{'LATEXOPTS'} . ' %O %S'; $pdflatex = 'pdflatex ' . $ENV{'LATEXOPTS'} . ' %O %S'; $lualatex = 'lualatex ' . $ENV{'LATEXOPTS'} . ' %O %S'; $xelatex = 'xelatex --no-pdf ' . $ENV{'LATEXOPTS'} . ' %O %S'; $makeindex = 'makeindex -s python.ist %O -o %D %S'; add_cus_dep( "glo", "gls", 0, "makeglo" ); sub makeglo { return system( "makeindex -s gglo.ist -o '$_[0].gls' '$_[0].glo'" ); } [rtd-command-info] start-time: 2022-05-22T05:29:53.315747Z, end-time: 2022-05-22T05:30:11.436086Z, duration: 18, exit-code: 0 latexmk -r latexmkrc -pdf -f -dvi- -ps- -jobname=cloudferro-waw3-1-kubernetes-test -interaction=nonstopmode Use of uninitialized value $ENV{"LATEXOPTS"} in concatenation (.) or string at (eval 10) line 1, chunk 1. Use of uninitialized value $ENV{"LATEXOPTS"} in concatenation (.) or string at (eval 10) line 2, chunk 1. Use of uninitialized value $ENV{"LATEXOPTS"} in concatenation (.) or string at (eval 10) line 3, chunk 1. Use of uninitialized value $ENV{"LATEXOPTS"} in concatenation (.) or string at (eval 10) line 4, chunk 1. Subroutine makeglo redefined at (eval 11) line 7, chunk 1. Use of uninitialized value $ENV{"LATEXOPTS"} in concatenation (.) or string at (eval 11) line 1, chunk 1. Use of uninitialized value $ENV{"LATEXOPTS"} in concatenation (.) or string at (eval 11) line 2, chunk 1. Use of uninitialized value $ENV{"LATEXOPTS"} in concatenation (.) or string at (eval 11) line 3, chunk 1. Use of uninitialized value $ENV{"LATEXOPTS"} in concatenation (.) or string at (eval 11) line 4, chunk 1. Latexmk: This is Latexmk, John Collins, 1 January 2015, version: 4.41. File::Glob::glob() will disappear in perl 5.30. Use File::Glob::bsd_glob() instead. at /usr/bin/latexmk line 7482. Rule 'pdflatex': Rules & subrules not known to be previously run: pdflatex Rule 'pdflatex': The following rules & subrules became out-of-date: 'pdflatex' ------------ Run number 1 of rule 'pdflatex' ------------ ------------ Running 'pdflatex -interaction=nonstopmode -recorder --jobname="cloudferro-waw3-1-kubernetes-test" "eumetsat.tex"' ------------ Latexmk: applying rule 'pdflatex'... This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdflatex) restricted \write18 enabled. entering extended mode (./eumetsat.tex LaTeX2e <2017-04-15> Babel <3.18> and hyphenation patterns for 84 language(s) loaded. (./sphinxmanual.cls Document Class: sphinxmanual 2019/12/01 v2.3.0 Document class (Sphinx manual) (/usr/share/texlive/texmf-dist/tex/latex/base/report.cls Document Class: report 2014/09/29 v1.4h Standard LaTeX document class (/usr/share/texlive/texmf-dist/tex/latex/base/size10.clo))) (/usr/share/texlive/texmf-dist/tex/latex/base/inputenc.sty (/usr/share/texlive/texmf-dist/tex/latex/base/utf8.def (/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.dfu) (/usr/share/texlive/texmf-dist/tex/latex/base/ot1enc.dfu) (/usr/share/texlive/texmf-dist/tex/latex/base/omsenc.dfu))) (/usr/share/texlive/texmf-dist/tex/latex/cmap/cmap.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/fontenc.sty (/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.def)<>) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsmath.sty For additional information on amsmath, use the `?' option. (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amstext.sty (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsgen.sty)) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsbsy.sty) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsopn.sty)) (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/amssymb.sty (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/amsfonts.sty)) (/usr/share/texlive/texmf-dist/tex/generic/babel/babel.sty (/usr/share/texlive/texmf-dist/tex/generic/babel/switch.def) (/usr/share/texlive/texmf-dist/tex/generic/babel-english/english.ldf (/usr/share/texlive/texmf-dist/tex/generic/babel/babel.def (/usr/share/texlive/texmf-dist/tex/generic/babel/txtbabel.def)))) (/usr/share/texmf/tex/latex/tex-gyre/tgtermes.sty (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/kvoptions.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/keyval.sty) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ltxcmds.sty) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/kvsetkeys.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/infwarerr.sty) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/etexcmds.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifluatex.sty))))) (/usr/share/texmf/tex/latex/tex-gyre/tgheros.sty) (/usr/share/texlive/texmf-dist/tex/latex/fncychap/fncychap.sty) (./sphinx.sty (/usr/share/texlive/texmf-dist/tex/latex/xcolor/xcolor.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/color.cfg) (/usr/share/texlive/texmf-dist/tex/latex/graphics-def/pdftex.def)) (./sphinxoptionshyperref.sty) (./sphinxoptionsgeometry.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/textcomp.sty (/usr/share/texlive/texmf-dist/tex/latex/base/ts1enc.def (/usr/share/texlive/texmf-dist/tex/latex/base/ts1enc.dfu))) (/usr/share/texlive/texmf-dist/tex/latex/float/float.sty) (/usr/share/texlive/texmf-dist/tex/latex/wrapfig/wrapfig.sty) (/usr/share/texlive/texmf-dist/tex/latex/capt-of/capt-of.sty) (/usr/share/texlive/texmf-dist/tex/latex/tools/multicol.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphicx.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphics.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/trig.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/graphics.cfg))) (./sphinxlatexgraphics.sty) (./sphinxlatexadmonitions.sty (/usr/share/texlive/texmf-dist/tex/latex/framed/framed.sty)) (./sphinxlatexliterals.sty (/usr/share/texlive/texmf-dist/tex/latex/fancyvrb/fancyvrb.sty Style option: `fancyvrb' v2.7a, with DG/SPQR fixes, and firstline=lastline fix <2008/02/07> (tvz)) (/usr/share/texlive/texmf-dist/tex/latex/base/alltt.sty) (/usr/share/texlive/texmf-dist/tex/latex/upquote/upquote.sty) (/usr/share/texlive/texmf-dist/tex/latex/needspace/needspace.sty)) (./sphinxlatexshadowbox.sty) (./sphinxlatexcontainers.sty) (./sphinxhighlight.sty) (./sphinxlatextables.sty (/usr/share/texlive/texmf-dist/tex/latex/tabulary/tabulary.sty (/usr/share/texlive/texmf-dist/tex/latex/tools/array.sty)) (/usr/share/texlive/texmf-dist/tex/latex/tools/longtable.sty) (/usr/share/texlive/texmf-dist/tex/latex/varwidth/varwidth.sty)) (./sphinxlatexnumfig.sty (/usr/share/texlive/texmf-dist/tex/latex/carlisle/remreset.sty)) (./sphinxlatexlists.sty) (./sphinxpackagefootnote.sty) (./sphinxlatexindbibtoc.sty (/usr/share/texlive/texmf-dist/tex/latex/base/makeidx.sty)) (./sphinxlatexstylepage.sty (/usr/share/texlive/texmf-dist/tex/latex/parskip/parskip.sty) (/usr/share/texlive/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty)) (./sphinxlatexstyleheadings.sty (/usr/share/texlive/texmf-dist/tex/latex/titlesec/titlesec.sty)) (./sphinxlatexstyletext.sty) (./sphinxlatexobjects.sty)) (/usr/share/texlive/texmf-dist/tex/latex/geometry/geometry.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifpdf.sty) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifvtex.sty) (/usr/share/texlive/texmf-dist/tex/generic/ifxetex/ifxetex.sty)) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/hyperref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-hyperref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-generic.sty)) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/auxhook.sty) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/pd1enc.def) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/hyperref.cfg) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/puenc.def) (/usr/share/texlive/texmf-dist/tex/latex/url/url.sty)) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/hpdftex.def (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/rerunfilecheck.sty)) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/hypcap.sty) (./sphinxmessages.sty) Writing index file cloudferro-waw3-1-kubernetes-test.idx (./cloudferro-waw3-1-kubernetes-test.aux) (/usr/share/texlive/texmf-dist/tex/latex/base/ts1cmr.fd) (/usr/share/texmf/tex/latex/tex-gyre/t1qtm.fd) (/usr/share/texlive/texmf-dist/tex/context/base/mkii/supp-pdf.mkii [Loading MPS to PDF converter (version 2006.09.02).] ) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/epstopdf-base.sty (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/grfext.sty) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg)) *geometry* driver: auto-detecting *geometry* detected driver: pdftex (/usr/share/texlive/texmf-dist/tex/latex/hyperref/nameref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/gettitlestring.sty)) (/usr/share/texmf/tex/latex/tex-gyre/t1qhv.fd)<><><><> (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsa.fd) (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsb.fd) [1{/var/lib/texmf/fo nts/map/pdftex/updmap/pdftex.map}] [2] [1] [2] Chapter 1. (/usr/share/texlive/texmf-dist/tex/latex/txfonts/t1txtt.fd) [1 <./scrn1.png (PN G copy)> <./scrn2.png (PNG copy)>] (/usr/share/texmf/tex/latex/tex-gyre/ts1qtm.fd) [2 <./scrn3.png>] [3 <./scrn4.p ng> <./scrn5.png (PNG copy)>] [4 <./scrn6.png> <./scrn7.png> <./scrn8.png>] [5 <./scrn9.png> <./scrn10.png>] [6 <./scrn11.png> <./scrn12.png>] [7 <./scrn13 .png>] (/usr/share/texlive/texmf-dist/tex/latex/txfonts/ts1txtt.fd) [8] [9 <./scrn141.png>] [10 <./scrn15.png> <./scrn16.png>] [11 <./scrn17.png> <./sc rn18.png>] [12 <./scrn19.png> <./scrn20.png>] [13 <./scrn22.png>] [14 <./scrn23 .png>] [15 <./scrn24.png>] [16 <./scrn261.png>] No file cloudferro-waw3-1-kubernetes-test.ind. [17 <./scrn29.png>] [18 <./scrn27.png>] [19 <./scrn30.png> <./scrn28.png>] (./cloudferro-waw3-1-kubernetes-test.aux) Package rerunfilecheck Warning: File `cloudferro-waw3-1-kubernetes-test.out' ha s changed. (rerunfilecheck) Rerun to get outlines right (rerunfilecheck) or use package `bookmark'. LaTeX Warning: Label(s) may have changed. Rerun to get cross-references right. ){/usr/share/texmf/fonts/enc/dvips/tex-gyre/q-ts1.enc}{/usr/share/texmf/fonts/ enc/dvips/tex-gyre/q-ec.enc} Output written on cloudferro-waw3-1-kubernetes-test.pdf (23 pages, 1390990 byte s). Transcript written on cloudferro-waw3-1-kubernetes-test.log. Latexmk: Index file 'cloudferro-waw3-1-kubernetes-test.idx' was written Latexmk: Missing input file: 'cloudferro-waw3-1-kubernetes-test.ind' from line 'No file cloudferro-waw3-1-kubernetes-test.ind.' Latexmk: References changed. Latexmk: References changed. Latexmk: Log file says output to 'cloudferro-waw3-1-kubernetes-test.pdf' Latexmk: Log file says output to 'cloudferro-waw3-1-kubernetes-test.pdf' Rule 'makeindex cloudferro-waw3-1-kubernetes-test.idx': File changes, etc: Non-existent destination files: 'cloudferro-waw3-1-kubernetes-test.ind' ------------ Run number 1 of rule 'makeindex cloudferro-waw3-1-kubernetes-test.idx' ------------ ------------ Running 'makeindex -s python.ist -o "cloudferro-waw3-1-kubernetes-test.ind" "cloudferro-waw3-1-kubernetes-test.idx"' ------------ Latexmk: applying rule 'makeindex cloudferro-waw3-1-kubernetes-test.idx'... This is makeindex, version 2.15 [TeX Live 2017] (kpathsea + Thai support). Scanning style file ./python.ist.......done (7 attributes redefined, 0 ignored). Scanning input file cloudferro-waw3-1-kubernetes-test.idx...done (0 entries accepted, 0 rejected). Nothing written in cloudferro-waw3-1-kubernetes-test.ind. Transcript written in cloudferro-waw3-1-kubernetes-test.ilg. Rule 'pdflatex': File changes, etc: Changed files, or newly in use since previous run(s): 'cloudferro-waw3-1-kubernetes-test.aux' 'cloudferro-waw3-1-kubernetes-test.ind' ------------ Run number 2 of rule 'pdflatex' ------------ ------------ Running 'pdflatex -interaction=nonstopmode -recorder --jobname="cloudferro-waw3-1-kubernetes-test" "eumetsat.tex"' ------------ Latexmk: applying rule 'pdflatex'... This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdflatex) restricted \write18 enabled. entering extended mode (./eumetsat.tex LaTeX2e <2017-04-15> Babel <3.18> and hyphenation patterns for 84 language(s) loaded. (./sphinxmanual.cls Document Class: sphinxmanual 2019/12/01 v2.3.0 Document class (Sphinx manual) (/usr/share/texlive/texmf-dist/tex/latex/base/report.cls Document Class: report 2014/09/29 v1.4h Standard LaTeX document class (/usr/share/texlive/texmf-dist/tex/latex/base/size10.clo))) (/usr/share/texlive/texmf-dist/tex/latex/base/inputenc.sty (/usr/share/texlive/texmf-dist/tex/latex/base/utf8.def (/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.dfu) (/usr/share/texlive/texmf-dist/tex/latex/base/ot1enc.dfu) (/usr/share/texlive/texmf-dist/tex/latex/base/omsenc.dfu))) (/usr/share/texlive/texmf-dist/tex/latex/cmap/cmap.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/fontenc.sty (/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.def)<>) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsmath.sty For additional information on amsmath, use the `?' option. (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amstext.sty (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsgen.sty)) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsbsy.sty) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsopn.sty)) (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/amssymb.sty (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/amsfonts.sty)) (/usr/share/texlive/texmf-dist/tex/generic/babel/babel.sty (/usr/share/texlive/texmf-dist/tex/generic/babel/switch.def) (/usr/share/texlive/texmf-dist/tex/generic/babel-english/english.ldf (/usr/share/texlive/texmf-dist/tex/generic/babel/babel.def (/usr/share/texlive/texmf-dist/tex/generic/babel/txtbabel.def)))) (/usr/share/texmf/tex/latex/tex-gyre/tgtermes.sty (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/kvoptions.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/keyval.sty) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ltxcmds.sty) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/kvsetkeys.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/infwarerr.sty) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/etexcmds.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifluatex.sty))))) (/usr/share/texmf/tex/latex/tex-gyre/tgheros.sty) (/usr/share/texlive/texmf-dist/tex/latex/fncychap/fncychap.sty) (./sphinx.sty (/usr/share/texlive/texmf-dist/tex/latex/xcolor/xcolor.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/color.cfg) (/usr/share/texlive/texmf-dist/tex/latex/graphics-def/pdftex.def)) (./sphinxoptionshyperref.sty) (./sphinxoptionsgeometry.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/textcomp.sty (/usr/share/texlive/texmf-dist/tex/latex/base/ts1enc.def (/usr/share/texlive/texmf-dist/tex/latex/base/ts1enc.dfu))) (/usr/share/texlive/texmf-dist/tex/latex/float/float.sty) (/usr/share/texlive/texmf-dist/tex/latex/wrapfig/wrapfig.sty) (/usr/share/texlive/texmf-dist/tex/latex/capt-of/capt-of.sty) (/usr/share/texlive/texmf-dist/tex/latex/tools/multicol.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphicx.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphics.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/trig.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/graphics.cfg))) (./sphinxlatexgraphics.sty) (./sphinxlatexadmonitions.sty (/usr/share/texlive/texmf-dist/tex/latex/framed/framed.sty)) (./sphinxlatexliterals.sty (/usr/share/texlive/texmf-dist/tex/latex/fancyvrb/fancyvrb.sty Style option: `fancyvrb' v2.7a, with DG/SPQR fixes, and firstline=lastline fix <2008/02/07> (tvz)) (/usr/share/texlive/texmf-dist/tex/latex/base/alltt.sty) (/usr/share/texlive/texmf-dist/tex/latex/upquote/upquote.sty) (/usr/share/texlive/texmf-dist/tex/latex/needspace/needspace.sty)) (./sphinxlatexshadowbox.sty) (./sphinxlatexcontainers.sty) (./sphinxhighlight.sty) (./sphinxlatextables.sty (/usr/share/texlive/texmf-dist/tex/latex/tabulary/tabulary.sty (/usr/share/texlive/texmf-dist/tex/latex/tools/array.sty)) (/usr/share/texlive/texmf-dist/tex/latex/tools/longtable.sty) (/usr/share/texlive/texmf-dist/tex/latex/varwidth/varwidth.sty)) (./sphinxlatexnumfig.sty (/usr/share/texlive/texmf-dist/tex/latex/carlisle/remreset.sty)) (./sphinxlatexlists.sty) (./sphinxpackagefootnote.sty) (./sphinxlatexindbibtoc.sty (/usr/share/texlive/texmf-dist/tex/latex/base/makeidx.sty)) (./sphinxlatexstylepage.sty (/usr/share/texlive/texmf-dist/tex/latex/parskip/parskip.sty) (/usr/share/texlive/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty)) (./sphinxlatexstyleheadings.sty (/usr/share/texlive/texmf-dist/tex/latex/titlesec/titlesec.sty)) (./sphinxlatexstyletext.sty) (./sphinxlatexobjects.sty)) (/usr/share/texlive/texmf-dist/tex/latex/geometry/geometry.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifpdf.sty) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifvtex.sty) (/usr/share/texlive/texmf-dist/tex/generic/ifxetex/ifxetex.sty)) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/hyperref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-hyperref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-generic.sty)) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/auxhook.sty) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/pd1enc.def) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/hyperref.cfg) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/puenc.def) (/usr/share/texlive/texmf-dist/tex/latex/url/url.sty)) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/hpdftex.def (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/rerunfilecheck.sty)) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/hypcap.sty) (./sphinxmessages.sty) Writing index file cloudferro-waw3-1-kubernetes-test.idx (./cloudferro-waw3-1-kubernetes-test.aux) (/usr/share/texlive/texmf-dist/tex/latex/base/ts1cmr.fd) (/usr/share/texmf/tex/latex/tex-gyre/t1qtm.fd) (/usr/share/texlive/texmf-dist/tex/context/base/mkii/supp-pdf.mkii [Loading MPS to PDF converter (version 2006.09.02).] ) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/epstopdf-base.sty (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/grfext.sty) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg)) *geometry* driver: auto-detecting *geometry* detected driver: pdftex (/usr/share/texlive/texmf-dist/tex/latex/hyperref/nameref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/gettitlestring.sty)) (./cloudferro-waw3-1-kubernetes-test.out) (./cloudferro-waw3-1-kubernetes-test.out) (/usr/share/texmf/tex/latex/tex-gyre/t1qhv.fd)<><><><> (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsa.fd) (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsb.fd) [1{/var/lib/texmf/fo nts/map/pdftex/updmap/pdftex.map}] [2] (./cloudferro-waw3-1-kubernetes-test.toc ) [1] [2] Chapter 1. (/usr/share/texlive/texmf-dist/tex/latex/txfonts/t1txtt.fd) [1 <./scrn1.png (PN G copy)> <./scrn2.png (PNG copy)>] (/usr/share/texmf/tex/latex/tex-gyre/ts1qtm.fd) [2 <./scrn3.png>] [3 <./scrn4.p ng> <./scrn5.png (PNG copy)>] [4 <./scrn6.png> <./scrn7.png> <./scrn8.png>] [5 <./scrn9.png> <./scrn10.png>] [6 <./scrn11.png> <./scrn12.png>] [7 <./scrn13 .png>] (/usr/share/texlive/texmf-dist/tex/latex/txfonts/ts1txtt.fd) [8] [9 <./scrn141.png>] [10 <./scrn15.png> <./scrn16.png>] [11 <./scrn17.png> <./sc rn18.png>] [12 <./scrn19.png> <./scrn20.png>] [13 <./scrn22.png>] [14 <./scrn23 .png>] [15 <./scrn24.png>] [16 <./scrn261.png>] (./cloudferro-waw3-1-kubernetes-test.ind) [17 <./scrn29.png>] [18 <./scrn27.png >] [19 <./scrn30.png> <./scrn28.png>] (./cloudferro-waw3-1-kubernetes-test.aux) ){/usr/share/texmf/fonts/enc/dvips/tex-gyre/q-ts1.enc}{/usr/share/texmf/fonts/ enc/dvips/tex-gyre/q-ec.enc} Output written on cloudferro-waw3-1-kubernetes-test.pdf (23 pages, 1391595 byte s). Transcript written on cloudferro-waw3-1-kubernetes-test.log. Latexmk: Index file 'cloudferro-waw3-1-kubernetes-test.idx' was written Latexmk: Log file says output to 'cloudferro-waw3-1-kubernetes-test.pdf' Latexmk: Log file says output to 'cloudferro-waw3-1-kubernetes-test.pdf' Rule 'pdflatex': File changes, etc: Changed files, or newly in use since previous run(s): 'cloudferro-waw3-1-kubernetes-test.out' 'cloudferro-waw3-1-kubernetes-test.toc' ------------ Run number 3 of rule 'pdflatex' ------------ Latexmk: applying rule 'pdflatex'... ------------ Running 'pdflatex -interaction=nonstopmode -recorder --jobname="cloudferro-waw3-1-kubernetes-test" "eumetsat.tex"' ------------ This is pdfTeX, Version 3.14159265-2.6-1.40.18 (TeX Live 2017/Debian) (preloaded format=pdflatex) restricted \write18 enabled. entering extended mode (./eumetsat.tex LaTeX2e <2017-04-15> Babel <3.18> and hyphenation patterns for 84 language(s) loaded. (./sphinxmanual.cls Document Class: sphinxmanual 2019/12/01 v2.3.0 Document class (Sphinx manual) (/usr/share/texlive/texmf-dist/tex/latex/base/report.cls Document Class: report 2014/09/29 v1.4h Standard LaTeX document class (/usr/share/texlive/texmf-dist/tex/latex/base/size10.clo))) (/usr/share/texlive/texmf-dist/tex/latex/base/inputenc.sty (/usr/share/texlive/texmf-dist/tex/latex/base/utf8.def (/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.dfu) (/usr/share/texlive/texmf-dist/tex/latex/base/ot1enc.dfu) (/usr/share/texlive/texmf-dist/tex/latex/base/omsenc.dfu))) (/usr/share/texlive/texmf-dist/tex/latex/cmap/cmap.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/fontenc.sty (/usr/share/texlive/texmf-dist/tex/latex/base/t1enc.def)<>) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsmath.sty For additional information on amsmath, use the `?' option. (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amstext.sty (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsgen.sty)) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsbsy.sty) (/usr/share/texlive/texmf-dist/tex/latex/amsmath/amsopn.sty)) (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/amssymb.sty (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/amsfonts.sty)) (/usr/share/texlive/texmf-dist/tex/generic/babel/babel.sty (/usr/share/texlive/texmf-dist/tex/generic/babel/switch.def) (/usr/share/texlive/texmf-dist/tex/generic/babel-english/english.ldf (/usr/share/texlive/texmf-dist/tex/generic/babel/babel.def (/usr/share/texlive/texmf-dist/tex/generic/babel/txtbabel.def)))) (/usr/share/texmf/tex/latex/tex-gyre/tgtermes.sty (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/kvoptions.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/keyval.sty) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ltxcmds.sty) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/kvsetkeys.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/infwarerr.sty) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/etexcmds.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifluatex.sty))))) (/usr/share/texmf/tex/latex/tex-gyre/tgheros.sty) (/usr/share/texlive/texmf-dist/tex/latex/fncychap/fncychap.sty) (./sphinx.sty (/usr/share/texlive/texmf-dist/tex/latex/xcolor/xcolor.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/color.cfg) (/usr/share/texlive/texmf-dist/tex/latex/graphics-def/pdftex.def)) (./sphinxoptionshyperref.sty) (./sphinxoptionsgeometry.sty) (/usr/share/texlive/texmf-dist/tex/latex/base/textcomp.sty (/usr/share/texlive/texmf-dist/tex/latex/base/ts1enc.def (/usr/share/texlive/texmf-dist/tex/latex/base/ts1enc.dfu))) (/usr/share/texlive/texmf-dist/tex/latex/float/float.sty) (/usr/share/texlive/texmf-dist/tex/latex/wrapfig/wrapfig.sty) (/usr/share/texlive/texmf-dist/tex/latex/capt-of/capt-of.sty) (/usr/share/texlive/texmf-dist/tex/latex/tools/multicol.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphicx.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/graphics.sty (/usr/share/texlive/texmf-dist/tex/latex/graphics/trig.sty) (/usr/share/texlive/texmf-dist/tex/latex/graphics-cfg/graphics.cfg))) (./sphinxlatexgraphics.sty) (./sphinxlatexadmonitions.sty (/usr/share/texlive/texmf-dist/tex/latex/framed/framed.sty)) (./sphinxlatexliterals.sty (/usr/share/texlive/texmf-dist/tex/latex/fancyvrb/fancyvrb.sty Style option: `fancyvrb' v2.7a, with DG/SPQR fixes, and firstline=lastline fix <2008/02/07> (tvz)) (/usr/share/texlive/texmf-dist/tex/latex/base/alltt.sty) (/usr/share/texlive/texmf-dist/tex/latex/upquote/upquote.sty) (/usr/share/texlive/texmf-dist/tex/latex/needspace/needspace.sty)) (./sphinxlatexshadowbox.sty) (./sphinxlatexcontainers.sty) (./sphinxhighlight.sty) (./sphinxlatextables.sty (/usr/share/texlive/texmf-dist/tex/latex/tabulary/tabulary.sty (/usr/share/texlive/texmf-dist/tex/latex/tools/array.sty)) (/usr/share/texlive/texmf-dist/tex/latex/tools/longtable.sty) (/usr/share/texlive/texmf-dist/tex/latex/varwidth/varwidth.sty)) (./sphinxlatexnumfig.sty (/usr/share/texlive/texmf-dist/tex/latex/carlisle/remreset.sty)) (./sphinxlatexlists.sty) (./sphinxpackagefootnote.sty) (./sphinxlatexindbibtoc.sty (/usr/share/texlive/texmf-dist/tex/latex/base/makeidx.sty)) (./sphinxlatexstylepage.sty (/usr/share/texlive/texmf-dist/tex/latex/parskip/parskip.sty) (/usr/share/texlive/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty)) (./sphinxlatexstyleheadings.sty (/usr/share/texlive/texmf-dist/tex/latex/titlesec/titlesec.sty)) (./sphinxlatexstyletext.sty) (./sphinxlatexobjects.sty)) (/usr/share/texlive/texmf-dist/tex/latex/geometry/geometry.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifpdf.sty) (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/ifvtex.sty) (/usr/share/texlive/texmf-dist/tex/generic/ifxetex/ifxetex.sty)) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/hyperref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-hyperref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/hobsub-generic.sty)) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/auxhook.sty) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/pd1enc.def) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/hyperref.cfg) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/puenc.def) (/usr/share/texlive/texmf-dist/tex/latex/url/url.sty)) (/usr/share/texlive/texmf-dist/tex/latex/hyperref/hpdftex.def (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/rerunfilecheck.sty)) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/hypcap.sty) (./sphinxmessages.sty) Writing index file cloudferro-waw3-1-kubernetes-test.idx (./cloudferro-waw3-1-kubernetes-test.aux) (/usr/share/texlive/texmf-dist/tex/latex/base/ts1cmr.fd) (/usr/share/texmf/tex/latex/tex-gyre/t1qtm.fd) (/usr/share/texlive/texmf-dist/tex/context/base/mkii/supp-pdf.mkii [Loading MPS to PDF converter (version 2006.09.02).] ) (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/epstopdf-base.sty (/usr/share/texlive/texmf-dist/tex/latex/oberdiek/grfext.sty) (/usr/share/texlive/texmf-dist/tex/latex/latexconfig/epstopdf-sys.cfg)) *geometry* driver: auto-detecting *geometry* detected driver: pdftex (/usr/share/texlive/texmf-dist/tex/latex/hyperref/nameref.sty (/usr/share/texlive/texmf-dist/tex/generic/oberdiek/gettitlestring.sty)) (./cloudferro-waw3-1-kubernetes-test.out) (./cloudferro-waw3-1-kubernetes-test.out) (/usr/share/texmf/tex/latex/tex-gyre/t1qhv.fd)<><><><> (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsa.fd) (/usr/share/texlive/texmf-dist/tex/latex/amsfonts/umsb.fd) [1{/var/lib/texmf/fo nts/map/pdftex/updmap/pdftex.map}] [2] (./cloudferro-waw3-1-kubernetes-test.toc ) [1] [2] Chapter 1. (/usr/share/texlive/texmf-dist/tex/latex/txfonts/t1txtt.fd) [1 <./scrn1.png (PN G copy)> <./scrn2.png (PNG copy)>] (/usr/share/texmf/tex/latex/tex-gyre/ts1qtm.fd) [2 <./scrn3.png>] [3 <./scrn4.p ng> <./scrn5.png (PNG copy)>] [4 <./scrn6.png> <./scrn7.png> <./scrn8.png>] [5 <./scrn9.png> <./scrn10.png>] [6 <./scrn11.png> <./scrn12.png>] [7 <./scrn13 .png>] (/usr/share/texlive/texmf-dist/tex/latex/txfonts/ts1txtt.fd) [8] [9 <./scrn141.png>] [10 <./scrn15.png> <./scrn16.png>] [11 <./scrn17.png> <./sc rn18.png>] [12 <./scrn19.png> <./scrn20.png>] [13 <./scrn22.png>] [14 <./scrn23 .png>] [15 <./scrn24.png>] [16 <./scrn261.png>] (./cloudferro-waw3-1-kubernetes-test.ind) [17 <./scrn29.png>] [18 <./scrn27.png >] [19 <./scrn30.png> <./scrn28.png>] (./cloudferro-waw3-1-kubernetes-test.aux) ){/usr/share/texmf/fonts/enc/dvips/tex-gyre/q-ts1.enc}{/usr/share/texmf/fonts/ enc/dvips/tex-gyre/q-ec.enc} Output written on cloudferro-waw3-1-kubernetes-test.pdf (23 pages, 1391595 byte s). Transcript written on cloudferro-waw3-1-kubernetes-test.log. Latexmk: Index file 'cloudferro-waw3-1-kubernetes-test.idx' was written Latexmk: Log file says output to 'cloudferro-waw3-1-kubernetes-test.pdf' Latexmk: Log file says output to 'cloudferro-waw3-1-kubernetes-test.pdf' Latexmk: All targets (cloudferro-waw3-1-kubernetes-test.pdf) are up-to-date [rtd-command-info] start-time: 2022-05-22T05:30:11.635366Z, end-time: 2022-05-22T05:30:11.736793Z, duration: 0, exit-code: 0 mv -f /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/_build/latex/cloudferro-waw3-1-kubernetes-test.pdf /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/artifacts/latest/sphinx_pdf/cloudferro-waw3-1-kubernetes-test.pdf [rtd-command-info] start-time: 2022-05-22T05:30:11.930896Z, end-time: 2022-05-22T05:30:31.795978Z, duration: 19, exit-code: 0 python -m sphinx -T -E -b epub -d _build/doctrees -D language=en . _build/epub Running Sphinx v4.4.0 loading translations [en]... done making output directory... done WARNING: conf value "version" should not be empty for EPUB3 building [mo]: targets for 0 po files that are out of date building [epub]: targets for 9 source files that are out of date updating environment: [new config] 9 added, 0 changed, 0 removed reading sources... [ 11%] datavolume/datavolume reading sources... [ 22%] eodata/eodata reading sources... [ 33%] general/general reading sources... [ 44%] index reading sources... [ 55%] kubernetes/kubernetes reading sources... [ 66%] networking/networking reading sources... [ 77%] networking/vpnaas reading sources... [ 88%] openstackcli/openstackcli reading sources... [100%] s3/s3 /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/accessusings3cmd' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/attachvolumetovmlessthan2tb' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/cannotaccesseodata' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/ephemeralvspersistentstorage' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/exportvolumenfs' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/exportvolumeovernfs' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/extendvolumelinux' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/howmanyobjectsobjectstorage' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/howtoaccesseodata' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/howtomountdriveoverssh' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/mountobjectstoragelinux' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/moveadatavolume' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/volumesnapshotinheritanceanditsconsequences' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst:4: WARNING: toctree contains reference to nonexisting document 'datavolume/volumesnapshot' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst:5: WARNING: toctree contains reference to nonexisting document 'eodata/accesslisteousingboto3' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst:5: WARNING: toctree contains reference to nonexisting document 'eodata/cantaccesseodata' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst:5: WARNING: toctree contains reference to nonexisting document 'eodata/downloadeodatausingboto3' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst:5: WARNING: toctree contains reference to nonexisting document 'eodata/eodataaccess' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst:5: WARNING: toctree contains reference to nonexisting document 'eodata/eodatagoofys' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst:5: WARNING: toctree contains reference to nonexisting document 'eodata/eodatas3fs' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst:5: WARNING: toctree contains reference to nonexisting document 'eodata/mounteodatausings3protocol' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst:5: WARNING: toctree contains reference to nonexisting document 'eodata/s3cmd-download' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-to-Create-a-Kubernetes-Cluster-Using-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-to-Create-a-Kubernetes-Cluster-Template-Using-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-To-Install-OpenStack-and-Magnum-Clients-for-Command-Line-Interface-to-Eumetsat-Elasticity-Horizon' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-To-Create-API-Server-LoadBalancer-for-Kubernetes-Cluster-On-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-To-Create-Floating-IP-for-Servers-on-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/Creating-Additional-Nodegroups-in-Kubernetes-Cluster-on-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/Autoscaling-Kubernetes-Cluster-Resources-on-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-to-Connect-Two-Instances-Through-a-Private-Network-on-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-To-Create-and-Manage-Networks-on-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-to-Create-a-Router-on-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-to-Use-Security-Groups-to-Tighten-Security-Using-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-to-Create-and-Return-a-Floating-IP-Address-on-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/Volume-based-vs-Ephemeral-based-Storage-for-Kubernetes-Clusters-on-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst:4: WARNING: toctree contains reference to nonexisting document 'kubernetes/How-To-Install-Shared-File-System-On-Eumetsat-Elasticity-OpenStack-Magnum' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/openstackcli/openstackcli.rst:5: WARNING: toctree contains reference to nonexisting document 'openstackcli/backupaninstance' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/openstackcli/openstackcli.rst:5: WARNING: toctree contains reference to nonexisting document 'openstackcli/createasetofvms' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/openstackcli/openstackcli.rst:5: WARNING: toctree contains reference to nonexisting document 'openstackcli/newprojectopenstack' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/openstackcli/openstackcli.rst:5: WARNING: toctree contains reference to nonexisting document 'openstackcli/openstacklinux' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3/s3.rst:4: WARNING: toctree contains reference to nonexisting document 's3/deletelargebucket' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3/s3.rst:4: WARNING: toctree contains reference to nonexisting document 's3/mountobjectstorage' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3/s3.rst:4: WARNING: toctree contains reference to nonexisting document 's3/objectstorage' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3/s3.rst:4: WARNING: toctree contains reference to nonexisting document 's3/remotetransfer' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3/s3.rst:4: WARNING: toctree contains reference to nonexisting document 's3/s3fscache' looking for now-outdated files... none found pickling environment... done checking consistency... /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/datavolume/datavolume.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodata/eodata.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/general/general.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/kubernetes/kubernetes.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/openstackcli/openstackcli.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3/s3.rst: WARNING: document isn't included in any toctree done preparing documents... done writing output... [ 11%] datavolume/datavolume writing output... [ 22%] eodata/eodata writing output... [ 33%] general/general writing output... [ 44%] index writing output... [ 55%] kubernetes/kubernetes writing output... [ 66%] networking/networking writing output... [ 77%] networking/vpnaas writing output... [ 88%] openstackcli/openstackcli writing output... [100%] s3/s3 generating indices... genindex done writing additional pages... done copying images... [ 3%] networking/scrn1.png copying images... [ 7%] networking/scrn2.png copying images... [ 10%] networking/scrn3.png copying images... [ 14%] networking/scrn4.png copying images... [ 17%] networking/scrn5.png copying images... [ 21%] networking/scrn6.png copying images... [ 25%] networking/scrn7.png copying images... [ 28%] networking/scrn8.png copying images... [ 32%] networking/scrn9.png copying images... [ 35%] networking/scrn10.png copying images... [ 39%] networking/scrn11.png copying images... [ 42%] networking/scrn12.png copying images... [ 46%] networking/scrn13.png copying images... [ 50%] networking/scrn141.png copying images... [ 53%] networking/scrn15.png copying images... [ 57%] networking/scrn16.png copying images... [ 60%] networking/scrn17.png copying images... [ 64%] networking/scrn18.png copying images... [ 67%] networking/scrn19.png copying images... [ 71%] networking/scrn20.png copying images... [ 75%] networking/scrn22.png copying images... [ 78%] networking/scrn23.png copying images... [ 82%] networking/scrn24.png copying images... [ 85%] networking/scrn261.png copying images... [ 89%] networking/scrn29.png copying images... [ 92%] networking/scrn27.png copying images... [ 96%] networking/scrn30.png copying images... [100%] networking/scrn28.png copying static files... done copying extra files... done writing mimetype file... writing META-INF/container.xml file... writing content.opf file... writing nav.xhtml file... writing toc.ncx file... writing Eumetsat.epub file... build succeeded, 54 warnings. The ePub file is in _build/epub. Updating searchtools for Read the Docs search... [rtd-command-info] start-time: 2022-05-22T05:30:31.996328Z, end-time: 2022-05-22T05:30:32.085111Z, duration: 0, exit-code: 0 mv -f /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/_build/epub/Eumetsat.epub /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/artifacts/latest/sphinx_epub/cloudferro-waw3-1-kubernetes-test.epub