Read the Docs build information Build id: 920737 Project: cloudferro-waw3-1-kubernetes-test Version: latest Commit: c2e6372f13b03e819d30d72f07d29fa3f6b2a9aa Date: 2022-04-19T08:53:31.823370Z State: finished Success: False [rtd-command-info] start-time: 2022-04-19T08:53:33.760435Z, end-time: 2022-04-19T08:53:34.330875Z, duration: 0, exit-code: 0 git clone --no-single-branch --depth 50 https://github.com/CloudFerro/waw3-1-kubernetes-test.git . Cloning into '.'... [rtd-command-info] start-time: 2022-04-19T08:53:34.526386Z, end-time: 2022-04-19T08:53:34.591786Z, duration: 0, exit-code: 0 git checkout --force origin/main Note: switching to 'origin/main'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at c2e6372 Update index.rst [rtd-command-info] start-time: 2022-04-19T08:53:34.801049Z, end-time: 2022-04-19T08:53:34.864852Z, duration: 0, exit-code: 0 git clean -d -f -f [rtd-command-info] start-time: 2022-04-19T08:53:35.898406Z, end-time: 2022-04-19T08:53:40.408041Z, duration: 4, exit-code: 0 python3.7 -mvirtualenv Using base prefix '/home/docs/.pyenv/versions/3.7.9' New python executable in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/bin/python3.7 Also creating executable in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/bin/python Installing setuptools, pip, wheel... done. [rtd-command-info] start-time: 2022-04-19T08:53:40.623410Z, end-time: 2022-04-19T08:53:42.480958Z, duration: 1, exit-code: 0 python -m pip install --upgrade --no-cache-dir pip setuptools<58.3.0 Requirement already satisfied: pip in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (22.0.4) Collecting setuptools<58.3.0 Downloading setuptools-58.2.0-py3-none-any.whl (946 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 946.1/946.1 KB 27.0 MB/s eta 0:00:00 Installing collected packages: setuptools Attempting uninstall: setuptools Found existing installation: setuptools 62.1.0 Uninstalling setuptools-62.1.0: Successfully uninstalled setuptools-62.1.0 Successfully installed setuptools-58.2.0 [rtd-command-info] start-time: 2022-04-19T08:53:42.674901Z, end-time: 2022-04-19T08:53:53.094570Z, duration: 10, exit-code: 0 python -m pip install --upgrade --no-cache-dir mock==1.0.1 pillow==5.4.1 alabaster>=0.7,<0.8,!=0.7.5 commonmark==0.8.1 recommonmark==0.5.0 sphinx sphinx-rtd-theme readthedocs-sphinx-ext<2.2 Collecting mock==1.0.1 Downloading mock-1.0.1.zip (861 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 861.9/861.9 KB 22.1 MB/s eta 0:00:00 Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting pillow==5.4.1 Downloading Pillow-5.4.1-cp37-cp37m-manylinux1_x86_64.whl (2.0 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.0/2.0 MB 124.0 MB/s eta 0:00:00 Collecting alabaster!=0.7.5,<0.8,>=0.7 Downloading alabaster-0.7.12-py2.py3-none-any.whl (14 kB) Collecting commonmark==0.8.1 Downloading commonmark-0.8.1-py2.py3-none-any.whl (47 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 47.4/47.4 KB 168.5 MB/s eta 0:00:00 Collecting recommonmark==0.5.0 Downloading recommonmark-0.5.0-py2.py3-none-any.whl (9.8 kB) Collecting sphinx Downloading Sphinx-4.5.0-py3-none-any.whl (3.1 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.1/3.1 MB 176.0 MB/s eta 0:00:00 Collecting sphinx-rtd-theme Downloading sphinx_rtd_theme-1.0.0-py2.py3-none-any.whl (2.8 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.8/2.8 MB 164.2 MB/s eta 0:00:00 Collecting readthedocs-sphinx-ext<2.2 Downloading readthedocs_sphinx_ext-2.1.5-py2.py3-none-any.whl (11 kB) Collecting future Downloading future-0.18.2.tar.gz (829 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 829.2/829.2 KB 240.1 MB/s eta 0:00:00 Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting docutils>=0.11 Downloading docutils-0.18.1-py2.py3-none-any.whl (570 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 570.0/570.0 KB 228.9 MB/s eta 0:00:00 Collecting imagesize Downloading imagesize-1.3.0-py2.py3-none-any.whl (5.2 kB) Collecting snowballstemmer>=1.1 Downloading snowballstemmer-2.2.0-py2.py3-none-any.whl (93 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 93.0/93.0 KB 191.9 MB/s eta 0:00:00 Collecting sphinxcontrib-htmlhelp>=2.0.0 Downloading sphinxcontrib_htmlhelp-2.0.0-py2.py3-none-any.whl (100 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 100.5/100.5 KB 192.9 MB/s eta 0:00:00 Collecting sphinxcontrib-applehelp Downloading sphinxcontrib_applehelp-1.0.2-py2.py3-none-any.whl (121 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 121.2/121.2 KB 205.2 MB/s eta 0:00:00 Collecting Pygments>=2.0 Downloading Pygments-2.11.2-py3-none-any.whl (1.1 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.1/1.1 MB 236.0 MB/s eta 0:00:00 Collecting requests>=2.5.0 Downloading requests-2.27.1-py2.py3-none-any.whl (63 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 63.1/63.1 KB 191.2 MB/s eta 0:00:00 Collecting sphinxcontrib-devhelp Downloading sphinxcontrib_devhelp-1.0.2-py2.py3-none-any.whl (84 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 84.7/84.7 KB 190.3 MB/s eta 0:00:00 Collecting Jinja2>=2.3 Downloading Jinja2-3.1.1-py3-none-any.whl (132 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 132.6/132.6 KB 213.5 MB/s eta 0:00:00 Collecting sphinxcontrib-qthelp Downloading sphinxcontrib_qthelp-1.0.3-py2.py3-none-any.whl (90 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 90.6/90.6 KB 207.6 MB/s eta 0:00:00 Collecting docutils>=0.11 Downloading docutils-0.17.1-py2.py3-none-any.whl (575 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 575.5/575.5 KB 233.9 MB/s eta 0:00:00 Collecting importlib-metadata>=4.4 Downloading importlib_metadata-4.11.3-py3-none-any.whl (18 kB) Collecting sphinxcontrib-serializinghtml>=1.1.5 Downloading sphinxcontrib_serializinghtml-1.1.5-py2.py3-none-any.whl (94 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 94.0/94.0 KB 201.3 MB/s eta 0:00:00 Collecting sphinxcontrib-jsmath Downloading sphinxcontrib_jsmath-1.0.1-py2.py3-none-any.whl (5.1 kB) Collecting babel>=1.3 Downloading Babel-2.9.1-py2.py3-none-any.whl (8.8 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 8.8/8.8 MB 167.2 MB/s eta 0:00:00 Collecting packaging Downloading packaging-21.3-py3-none-any.whl (40 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 40.8/40.8 KB 137.2 MB/s eta 0:00:00 Collecting pytz>=2015.7 Downloading pytz-2022.1-py2.py3-none-any.whl (503 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 503.5/503.5 KB 228.3 MB/s eta 0:00:00 Collecting zipp>=0.5 Downloading zipp-3.8.0-py3-none-any.whl (5.4 kB) Collecting typing-extensions>=3.6.4 Downloading typing_extensions-4.2.0-py3-none-any.whl (24 kB) Collecting MarkupSafe>=2.0 Downloading MarkupSafe-2.1.1-cp37-cp37m-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (25 kB) Collecting certifi>=2017.4.17 Downloading certifi-2021.10.8-py2.py3-none-any.whl (149 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 149.2/149.2 KB 203.1 MB/s eta 0:00:00 Collecting urllib3<1.27,>=1.21.1 Downloading urllib3-1.26.9-py2.py3-none-any.whl (138 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 139.0/139.0 KB 198.6 MB/s eta 0:00:00 Collecting charset-normalizer~=2.0.0 Downloading charset_normalizer-2.0.12-py3-none-any.whl (39 kB) Collecting idna<4,>=2.5 Downloading idna-3.3-py3-none-any.whl (61 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 61.2/61.2 KB 165.1 MB/s eta 0:00:00 Collecting pyparsing!=3.0.5,>=2.0.2 Downloading pyparsing-3.0.8-py3-none-any.whl (98 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 98.5/98.5 KB 197.1 MB/s eta 0:00:00 Building wheels for collected packages: mock, future Building wheel for mock (setup.py): started Building wheel for mock (setup.py): finished with status 'done' Created wheel for mock: filename=mock-1.0.1-py3-none-any.whl size=23773 sha256=4c103b3e688c1c516206d09186ed9e4a1d82df4dcacb4ad386d8d9ab5814a21e Stored in directory: /tmp/pip-ephem-wheel-cache-souo0wuv/wheels/7a/94/b1/0fdc5339a5bd487a5cc15421ec200d9ba3e2aa7190e4a727f1 Building wheel for future (setup.py): started Building wheel for future (setup.py): finished with status 'done' Created wheel for future: filename=future-0.18.2-py3-none-any.whl size=491070 sha256=d28c10847528c5b6133e4ef4a360f936fb9a106a6ca443dd6a2f0ae22bf29e00 Stored in directory: /tmp/pip-ephem-wheel-cache-souo0wuv/wheels/56/b0/fe/4410d17b32f1f0c3cf54cdfb2bc04d7b4b8f4ae377e2229ba0 Successfully built mock future Installing collected packages: snowballstemmer, pytz, mock, certifi, alabaster, zipp, urllib3, typing-extensions, sphinxcontrib-serializinghtml, sphinxcontrib-qthelp, sphinxcontrib-jsmath, sphinxcontrib-htmlhelp, sphinxcontrib-devhelp, sphinxcontrib-applehelp, pyparsing, Pygments, pillow, MarkupSafe, imagesize, idna, future, docutils, charset-normalizer, babel, requests, packaging, Jinja2, importlib-metadata, commonmark, sphinx, readthedocs-sphinx-ext, sphinx-rtd-theme, recommonmark Successfully installed Jinja2-3.1.1 MarkupSafe-2.1.1 Pygments-2.11.2 alabaster-0.7.12 babel-2.9.1 certifi-2021.10.8 charset-normalizer-2.0.12 commonmark-0.8.1 docutils-0.17.1 future-0.18.2 idna-3.3 imagesize-1.3.0 importlib-metadata-4.11.3 mock-1.0.1 packaging-21.3 pillow-5.4.1 pyparsing-3.0.8 pytz-2022.1 readthedocs-sphinx-ext-2.1.5 recommonmark-0.5.0 requests-2.27.1 snowballstemmer-2.2.0 sphinx-4.5.0 sphinx-rtd-theme-1.0.0 sphinxcontrib-applehelp-1.0.2 sphinxcontrib-devhelp-1.0.2 sphinxcontrib-htmlhelp-2.0.0 sphinxcontrib-jsmath-1.0.1 sphinxcontrib-qthelp-1.0.3 sphinxcontrib-serializinghtml-1.1.5 typing-extensions-4.2.0 urllib3-1.26.9 zipp-3.8.0 [rtd-command-info] start-time: 2022-04-19T08:53:53.308116Z, end-time: 2022-04-19T08:53:58.654487Z, duration: 5, exit-code: 0 python -m pip install --exists-action=w --no-cache-dir -r requirements.txt Requirement already satisfied: alabaster==0.7.12 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 1)) (0.7.12) Requirement already satisfied: Babel==2.9.1 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 2)) (2.9.1) Requirement already satisfied: certifi==2021.10.8 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 3)) (2021.10.8) Collecting cffi==1.15.0 Downloading cffi-1.15.0-cp37-cp37m-manylinux_2_12_x86_64.manylinux2010_x86_64.whl (427 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 427.1/427.1 KB 16.2 MB/s eta 0:00:00 Requirement already satisfied: charset-normalizer==2.0.12 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 5)) (2.0.12) Collecting colorama==0.4.4 Downloading colorama-0.4.4-py2.py3-none-any.whl (16 kB) Collecting Deprecated==1.2.13 Downloading Deprecated-1.2.13-py2.py3-none-any.whl (9.6 kB) Requirement already satisfied: docutils==0.17.1 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 8)) (0.17.1) Requirement already satisfied: idna==3.3 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 9)) (3.3) Requirement already satisfied: imagesize==1.3.0 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 10)) (1.3.0) Requirement already satisfied: importlib-metadata==4.11.3 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 11)) (4.11.3) Collecting Jinja2==3.0.3 Downloading Jinja2-3.0.3-py3-none-any.whl (133 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 133.6/133.6 KB 213.0 MB/s eta 0:00:00 Collecting livereload==2.6.3 Downloading livereload-2.6.3.tar.gz (25 kB) Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Requirement already satisfied: MarkupSafe==2.1.1 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 14)) (2.1.1) Requirement already satisfied: packaging==21.3 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 15)) (21.3) Collecting pycparser==2.21 Downloading pycparser-2.21-py2.py3-none-any.whl (118 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 118.7/118.7 KB 201.7 MB/s eta 0:00:00 Collecting PyGithub==1.55 Downloading PyGithub-1.55-py3-none-any.whl (291 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 291.7/291.7 KB 224.6 MB/s eta 0:00:00 Requirement already satisfied: Pygments==2.11.2 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 18)) (2.11.2) Collecting PyJWT==2.3.0 Downloading PyJWT-2.3.0-py3-none-any.whl (16 kB) Collecting PyNaCl==1.5.0 Downloading PyNaCl-1.5.0-cp36-abi3-manylinux_2_17_x86_64.manylinux2014_x86_64.manylinux_2_24_x86_64.whl (856 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 856.7/856.7 KB 107.8 MB/s eta 0:00:00 Collecting pyparsing==3.0.7 Downloading pyparsing-3.0.7-py3-none-any.whl (98 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 98.0/98.0 KB 203.8 MB/s eta 0:00:00 Collecting pytz==2021.3 Downloading pytz-2021.3-py2.py3-none-any.whl (503 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 503.5/503.5 KB 234.5 MB/s eta 0:00:00 Requirement already satisfied: requests==2.27.1 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 23)) (2.27.1) Collecting six==1.16.0 Downloading six-1.16.0-py2.py3-none-any.whl (11 kB) Requirement already satisfied: snowballstemmer==2.2.0 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 25)) (2.2.0) Collecting Sphinx==4.4.0 Downloading Sphinx-4.4.0-py3-none-any.whl (3.1 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.1/3.1 MB 202.4 MB/s eta 0:00:00 Collecting sphinx-autobuild==2021.3.14 Downloading sphinx_autobuild-2021.3.14-py3-none-any.whl (9.9 kB) Requirement already satisfied: sphinx-rtd-theme==1.0.0 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 28)) (1.0.0) Requirement already satisfied: sphinxcontrib-applehelp==1.0.2 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 29)) (1.0.2) Requirement already satisfied: sphinxcontrib-devhelp==1.0.2 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 30)) (1.0.2) Requirement already satisfied: sphinxcontrib-htmlhelp==2.0.0 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 31)) (2.0.0) Requirement already satisfied: sphinxcontrib-jsmath==1.0.1 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 32)) (1.0.1) Requirement already satisfied: sphinxcontrib-qthelp==1.0.3 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 33)) (1.0.3) Requirement already satisfied: sphinxcontrib-serializinghtml==1.1.5 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 34)) (1.1.5) Collecting tornado==6.1 Downloading tornado-6.1-cp37-cp37m-manylinux2010_x86_64.whl (428 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 428.5/428.5 KB 230.5 MB/s eta 0:00:00 Requirement already satisfied: urllib3==1.26.9 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 36)) (1.26.9) Collecting wrapt==1.14.0 Downloading wrapt-1.14.0-cp37-cp37m-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl (75 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 75.2/75.2 KB 185.4 MB/s eta 0:00:00 Collecting zipp==3.7.0 Downloading zipp-3.7.0-py3-none-any.whl (5.3 kB) Requirement already satisfied: typing-extensions>=3.6.4 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from importlib-metadata==4.11.3->-r requirements.txt (line 11)) (4.2.0) Building wheels for collected packages: livereload Building wheel for livereload (setup.py): started Building wheel for livereload (setup.py): finished with status 'done' Created wheel for livereload: filename=livereload-2.6.3-py2.py3-none-any.whl size=24724 sha256=f960272f013908ce2b842e18d9c29a2adc4226ba24f530c9e69c94a52923d99e Stored in directory: /tmp/pip-ephem-wheel-cache-9fge205d/wheels/d4/f2/03/55f37093eb8cb0c89d7efb206f792dba55cd5bd67b1c5b1ce1 Successfully built livereload Installing collected packages: pytz, zipp, wrapt, tornado, six, pyparsing, PyJWT, pycparser, Jinja2, colorama, livereload, Deprecated, cffi, Sphinx, PyNaCl, sphinx-autobuild, PyGithub Attempting uninstall: pytz Found existing installation: pytz 2022.1 Uninstalling pytz-2022.1: Successfully uninstalled pytz-2022.1 Attempting uninstall: zipp Found existing installation: zipp 3.8.0 Uninstalling zipp-3.8.0: Successfully uninstalled zipp-3.8.0 Attempting uninstall: pyparsing Found existing installation: pyparsing 3.0.8 Uninstalling pyparsing-3.0.8: Successfully uninstalled pyparsing-3.0.8 Attempting uninstall: Jinja2 Found existing installation: Jinja2 3.1.1 Uninstalling Jinja2-3.1.1: Successfully uninstalled Jinja2-3.1.1 Attempting uninstall: Sphinx Found existing installation: Sphinx 4.5.0 Uninstalling Sphinx-4.5.0: Successfully uninstalled Sphinx-4.5.0 Successfully installed Deprecated-1.2.13 Jinja2-3.0.3 PyGithub-1.55 PyJWT-2.3.0 PyNaCl-1.5.0 Sphinx-4.4.0 cffi-1.15.0 colorama-0.4.4 livereload-2.6.3 pycparser-2.21 pyparsing-3.0.7 pytz-2021.3 six-1.16.0 sphinx-autobuild-2021.3.14 tornado-6.1 wrapt-1.14.0 zipp-3.7.0 [rtd-command-info] start-time: 2022-04-19T08:54:00.088378Z, end-time: 2022-04-19T08:54:00.154379Z, duration: 0, exit-code: 0 cat source/conf.py # Configuration file for the Sphinx documentation builder. # # This file only contains a selection of the most common options. For a full # list see the documentation: # https://www.sphinx-doc.org/en/master/usage/configuration.html # -- Path setup -------------------------------------------------------------- # If extensions (or modules to document with autodoc) are in another directory, # add these directories to sys.path here. If the directory is relative to the # documentation root, use os.path.abspath to make it absolute, like shown here. # # import os # import sys # sys.path.insert(0, os.path.abspath('.')) from get_rst_files import get_files # -- Project information ----------------------------------------------------- project = "cf-docs" copyright = "2021, CloudFerro" author = "CloudFerro" # The full version, including alpha/beta/rc tags release = "0.0.1" # -- General configuration --------------------------------------------------- # Add any Sphinx extension module names here, as strings. They can be # extensions coming with Sphinx (named 'sphinx.ext.*') or your custom # ones. # Add any paths that contain templates here, relative to this directory. templates_path = ["_templates"] # List of patterns, relative to source directory, that match files and # directories to ignore when looking for source files. # This pattern also affects html_static_path and html_extra_path. exclude_patterns = [] urls_dict = get_files( [ "https://github.com/CloudFerro/kubernetes-doc/blob/main/source/How-to-Create-a-Kubernetes-Cluster-Using-Eumetsat-Elasticity-OpenStack-Magnum", "https://github.com/CloudFerro/kubernetes-doc/blob/main/source/How-to-Create-a-Kubernetes-Cluster-Template-Using-Eumetsat-Elasticity-OpenStack-Magnum", "https://github.com/CloudFerro/kubernetes-doc/blob/main/source/How-To-Install-OpenStack-and-Magnum-Clients-for-Command-Line-Interface-to-Eumetsat-Elasticity-Horizon", "https://github.com/CloudFerro/kubernetes-doc/blob/main/source/How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-Eumetsat-Elasticity-OpenStack-Magnum", "https://github.com/CloudFerro/kubernetes-doc/blob/main/source/How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-Eumetsat-Elasticity-OpenStack-Magnum", "https://github.com/CloudFerro/kubernetes-doc/blob/main/source/How-To-Create-API-Server-LoadBalancer-for-Kubernetes-Cluster-On-Eumetsat-Elasticity-OpenStack-Magnum", "https://github.com/CloudFerro/kubernetes-doc/blob/main/source/How-To-Create-Floating-IP-for-Servers-on-Eumetsat-Elasticity-OpenStack-Magnum", "https://github.com/CloudFerro/kubernetes-doc/blob/main/source/Creating-Additional-Nodegroups-in-Kubernetes-Cluster-on-Eumetsat-Elasticity-OpenStack-Magnum", "https://github.com/CloudFerro/kubernetes-doc/blob/main/source/Autoscaling-Kubernetes-Cluster-Resources-on-Eumetsat-Elasticity-OpenStack-Magnum", "https://github.com/CloudFerro/kubernetes-doc/blob/main/source/How-to-Connect-Two-Instances-Through-a-Private-Network-on-Eumetsat-Elasticity-OpenStack-Magnum", "https://github.com/CloudFerro/kubernetes-doc/blob/main/source/How-To-Create-and-Manage-Networks-on-Eumetsat-Elasticity-OpenStack-Magnum", "https://github.com/CloudFerro/kubernetes-doc/blob/main/source/How-to-Create-a-Router-on-Eumetsat-Elasticity-OpenStack-Magnum", "https://github.com/CloudFerro/kubernetes-doc/blob/main/source/How-to-Use-Security-Groups-to-Tighten-Security-Using-Eumetsat-Elasticity-OpenStack-Magnum", "https://github.com/CloudFerro/kubernetes-doc/blob/main/source/How-to-Create-and-Return-a-Floating-IP-Address-on-Eumetsat-Elasticity-OpenStack-Magnum", "https://github.com/CloudFerro/kubernetes-doc/blob/main/source/Volume-based-vs-Ephemeral-based-Storage-for-Kubernetes-Clusters-on-Eumetsat-Elasticity-OpenStack-Magnum", "https://github.com/CloudFerro/cf3-doc/blob/main/source/datavolume/accessusings3cmd", "https://github.com/CloudFerro/cf3-doc/blob/main/source/datavolume/cannotaccesseodata", "https://github.com/CloudFerro/cf3-doc/blob/main/source/datavolume/ephemeralvspersistentstorage", "https://github.com/CloudFerro/cf3-doc/blob/main/source/datavolume/exportvolumenfs", "https://github.com/CloudFerro/cf3-doc/blob/main/source/datavolume/exportvolumeovernfs", "https://github.com/CloudFerro/cf3-doc/blob/main/source/datavolume/extendvolumelinux", "https://github.com/CloudFerro/cf3-doc/blob/main/source/datavolume/howmanyobjectsobjectstorage", "https://github.com/CloudFerro/cf3-doc/blob/main/source/datavolume/howtoaccesseodata", "https://github.com/CloudFerro/cf3-doc/blob/main/source/datavolume/howtomountdriveoverssh", "https://github.com/CloudFerro/cf3-doc/blob/main/source/datavolume/mountobjectstoragelinux", "https://github.com/CloudFerro/cf3-doc/blob/main/source/datavolume/moveadatavolume", "https://github.com/CloudFerro/cf3-doc/blob/main/source/datavolume/volumesnapshot", "https://github.com/CloudFerro/cf3-doc/blob/main/source/eodata/accesslisteousingboto3", "https://github.com/CloudFerro/cf3-doc/blob/main/source/eodata/cantaccesseodata", "https://github.com/CloudFerro/cf3-doc/blob/main/source/eodata/downloadeodatausingboto3", "https://github.com/CloudFerro/cf3-doc/blob/main/source/eodata/eodataaccess", "https://github.com/CloudFerro/cf3-doc/blob/main/source/eodata/eodatagoofys", "https://github.com/CloudFerro/cf3-doc/blob/main/source/eodata/eodatas3fs", "https://github.com/CloudFerro/cf3-doc/blob/main/source/eodata/mounteodatausings3protocol", "https://github.com/CloudFerro/cf3-doc/blob/main/source/eodata/s3cmd-download", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/accessvmfromconsole", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/clonevm", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/fixconsole", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/howtocreatenewlinuxgpu", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/howtousedocker", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/keypairopenstack", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/newlinuxvm", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/openstackdomain", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/openstackproject", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/pythonvirtualenv", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/startavmfromasnapshot", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/statuspower", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/uploadimageusingopcli", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/vmnewvolumeno", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/vmnewvolumeyes", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/volumesnapshotinheritance", "https://github.com/CloudFerro/cf3-doc/blob/main/source/networking/accessvmsusingnames", "https://github.com/CloudFerro/cf3-doc/blob/main/source/networking/addremovefip", "https://github.com/CloudFerro/cf3-doc/blob/main/source/networking/cannotaccess", "https://github.com/CloudFerro/cf3-doc/blob/main/source/networking/cantpingvm", "https://github.com/CloudFerro/cf3-doc/blob/main/source/networking/connectviasshlinux", "https://github.com/CloudFerro/cf3-doc/blob/main/source/networking/connectviasshwin", "https://github.com/CloudFerro/cf3-doc/blob/main/source/networking/createanetworkwithrouter", "https://github.com/CloudFerro/cf3-doc/blob/main/source/networking/opennewports", "https://github.com/CloudFerro/cf3-doc/blob/main/source/networking/sshkeypair", "https://github.com/CloudFerro/cf3-doc/blob/main/source/networking/sshkeywebconsole", "https://github.com/CloudFerro/cf3-doc/blob/main/source/networking/vmvisible", "https://github.com/CloudFerro/cf3-doc/blob/main/source/networking/vpnaas", "https://github.com/CloudFerro/cf3-doc/blob/main/source/openstackcli/backupaninstance", "https://github.com/CloudFerro/cf3-doc/blob/main/source/openstackcli/createasetofvms", "https://github.com/CloudFerro/cf3-doc/blob/main/source/openstackcli/newprojectopenstack", "https://github.com/CloudFerro/cf3-doc/blob/main/source/openstackcli/openstacklinux", "https://github.com/CloudFerro/cf3-doc/blob/main/source/s3/deletelargebucket", "https://github.com/CloudFerro/cf3-doc/blob/main/source/s3/generateec2", "https://github.com/CloudFerro/cf3-doc/blob/main/source/s3/mountobjectstorage", "https://github.com/CloudFerro/cf3-doc/blob/main/source/s3/objectstorage", "https://github.com/CloudFerro/cf3-doc/blob/main/source/s3/remotetransfer", "https://github.com/CloudFerro/cf3-doc/blob/main/source/s3/s3fscache", ] ) html_context = { "display_github": True, "urls_dict": urls_dict, "github_host": "github.com", "github_user": "CloudFerro", "github_repo": "waw3-1-kubernetes-test", "github_version": "main", "conf_py_path": "/source/", "source_suffix": ".rst", } # -- Options for HTML output ------------------------------------------------- # The theme to use for HTML and HTML Help pages. See the documentation for # a list of builtin themes. # html_theme = "sphinx_rtd_theme" # Add any paths that contain custom static files (such as style sheets) here, # relative to this directory. They are copied after the builtin static files, # so a file named "default.css" will overwrite the builtin "default.css". html_static_path = ["_static"] ########################################################################### # auto-created readthedocs.org specific configuration # ########################################################################### # # The following code was added during an automated build on readthedocs.org # It is auto created and injected for every build. The result is based on the # conf.py.tmpl file found in the readthedocs.org codebase: # https://github.com/rtfd/readthedocs.org/blob/main/readthedocs/doc_builder/templates/doc_builder/conf.py.tmpl # # Note: this file shouldn't rely on extra dependencies. import importlib import sys import os.path # Borrowed from six. PY3 = sys.version_info[0] == 3 string_types = str if PY3 else basestring from sphinx import version_info # Get suffix for proper linking to GitHub # This is deprecated in Sphinx 1.3+, # as each page can have its own suffix if globals().get('source_suffix', False): if isinstance(source_suffix, string_types): SUFFIX = source_suffix elif isinstance(source_suffix, (list, tuple)): # Sphinx >= 1.3 supports list/tuple to define multiple suffixes SUFFIX = source_suffix[0] elif isinstance(source_suffix, dict): # Sphinx >= 1.8 supports a mapping dictionary for multiple suffixes SUFFIX = list(source_suffix.keys())[0] # make a ``list()`` for py2/py3 compatibility else: # default to .rst SUFFIX = '.rst' else: SUFFIX = '.rst' # Add RTD Static Path. Add to the end because it overwrites previous files. if not 'html_static_path' in globals(): html_static_path = [] if os.path.exists('_static'): html_static_path.append('_static') # Add RTD Theme only if they aren't overriding it already using_rtd_theme = ( ( 'html_theme' in globals() and html_theme in ['default'] and # Allow people to bail with a hack of having an html_style 'html_style' not in globals() ) or 'html_theme' not in globals() ) if using_rtd_theme: theme = importlib.import_module('sphinx_rtd_theme') html_theme = 'sphinx_rtd_theme' html_style = None html_theme_options = {} if 'html_theme_path' in globals(): html_theme_path.append(theme.get_html_theme_path()) else: html_theme_path = [theme.get_html_theme_path()] if globals().get('websupport2_base_url', False): websupport2_base_url = 'https://readthedocs.com/websupport' websupport2_static_url = 'https://assets.readthedocs.com/' #Add project information to the template context. context = { 'using_theme': using_rtd_theme, 'html_theme': html_theme, 'current_version': "latest", 'version_slug': "latest", 'MEDIA_URL': "https://media.readthedocs.com/media/", 'STATIC_URL': "https://assets.readthedocs.com/", 'PRODUCTION_DOMAIN': "readthedocs.com", 'versions': [ ("latest", "/en/latest/"), ], 'downloads': [ ("pdf", "//cloudferro-waw3-1-kubernetes-test.readthedocs-hosted.com/_/downloads/en/latest/pdf/"), ("html", "//cloudferro-waw3-1-kubernetes-test.readthedocs-hosted.com/_/downloads/en/latest/htmlzip/"), ("epub", "//cloudferro-waw3-1-kubernetes-test.readthedocs-hosted.com/_/downloads/en/latest/epub/"), ], 'subprojects': [ ], 'slug': 'cloudferro-waw3-1-kubernetes-test', 'name': u'waw3-1-kubernetes-test', 'rtd_language': u'en', 'programming_language': u'words', 'canonical_url': 'https://cloudferro-waw3-1-kubernetes-test.readthedocs-hosted.com/en/latest/', 'analytics_code': 'None', 'single_version': False, 'conf_py_path': '/source/', 'api_host': 'https://readthedocs.com', 'github_user': 'CloudFerro', 'proxied_api_host': '/_', 'github_repo': 'waw3-1-kubernetes-test', 'github_version': 'main', 'display_github': True, 'bitbucket_user': 'None', 'bitbucket_repo': 'None', 'bitbucket_version': 'main', 'display_bitbucket': False, 'gitlab_user': 'None', 'gitlab_repo': 'None', 'gitlab_version': 'main', 'display_gitlab': False, 'READTHEDOCS': True, 'using_theme': (html_theme == "default"), 'new_theme': (html_theme == "sphinx_rtd_theme"), 'source_suffix': SUFFIX, 'ad_free': False, 'docsearch_disabled': False, 'user_analytics_code': '', 'global_analytics_code': 'UA-17997319-2', 'commit': 'c2e6372f', } # For sphinx >=1.8 we can use html_baseurl to set the canonical URL. # https://www.sphinx-doc.org/en/master/usage/configuration.html#confval-html_baseurl if version_info >= (1, 8): if not globals().get('html_baseurl'): html_baseurl = context['canonical_url'] context['canonical_url'] = None if 'html_context' in globals(): html_context.update(context) else: html_context = context # Add custom RTD extension if 'extensions' in globals(): # Insert at the beginning because it can interfere # with other extensions. # See https://github.com/rtfd/readthedocs.org/pull/4054 extensions.insert(0, "readthedocs_ext.readthedocs") else: extensions = ["readthedocs_ext.readthedocs"] # Add External version warning banner to the external version documentation if 'branch' == 'external': extensions.insert(1, "readthedocs_ext.external_version_warning") readthedocs_vcs_url = 'None' readthedocs_build_url = 'https://readthedocs.com/projects/cloudferro-waw3-1-kubernetes-test/builds/920737/' project_language = 'en' # User's Sphinx configurations language_user = globals().get('language', None) latex_engine_user = globals().get('latex_engine', None) latex_elements_user = globals().get('latex_elements', None) # Remove this once xindy gets installed in Docker image and XINDYOPS # env variable is supported # https://github.com/rtfd/readthedocs-docker-images/pull/98 latex_use_xindy = False chinese = any([ language_user in ('zh_CN', 'zh_TW'), project_language in ('zh_CN', 'zh_TW'), ]) japanese = any([ language_user == 'ja', project_language == 'ja', ]) if chinese: latex_engine = latex_engine_user or 'xelatex' latex_elements_rtd = { 'preamble': '\\usepackage[UTF8]{ctex}\n', } latex_elements = latex_elements_user or latex_elements_rtd elif japanese: latex_engine = latex_engine_user or 'platex' # Make sure our build directory is always excluded exclude_patterns = globals().get('exclude_patterns', []) exclude_patterns.extend(['_build']) [rtd-command-info] start-time: 2022-04-19T08:54:00.330124Z, end-time: 2022-04-19T08:58:37.179598Z, duration: 276, exit-code: 0 python -m sphinx -T -E -b html -d _build/doctrees -D language=en . _build/html Running Sphinx v4.4.0 loading translations [en]... done making output directory... done WARNING: html_static_path entry '_static' does not exist building [mo]: targets for 0 po files that are out of date building [html]: targets for 75 source files that are out of date updating environment: [new config] 75 added, 0 changed, 0 removed reading sources... [ 1%] Autoscaling-Kubernetes-Cluster-Resources-on-Eumetsat-Elasticity-OpenStack-Magnum reading sources... [ 2%] Creating-Additional-Nodegroups-in-Kubernetes-Cluster-on-Eumetsat-Elasticity-OpenStack-Magnum reading sources... [ 4%] How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-Eumetsat-Elasticity-OpenStack-Magnum reading sources... [ 5%] How-To-Create-API-Server-LoadBalancer-for-Kubernetes-Cluster-On-Eumetsat-Elasticity-OpenStack-Magnum reading sources... [ 6%] How-To-Create-Floating-IP-for-Servers-on-Eumetsat-Elasticity-OpenStack-Magnum reading sources... [ 8%] How-To-Create-and-Manage-Networks-on-Eumetsat-Elasticity-OpenStack-Magnum reading sources... [ 9%] How-To-Install-OpenStack-and-Magnum-Clients-for-Command-Line-Interface-to-Eumetsat-Elasticity-Horizon reading sources... [ 10%] How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-Eumetsat-Elasticity-OpenStack-Magnum reading sources... [ 12%] How-to-Connect-Two-Instances-Through-a-Private-Network-on-Eumetsat-Elasticity-OpenStack-Magnum reading sources... [ 13%] How-to-Create-a-Kubernetes-Cluster-Template-Using-Eumetsat-Elasticity-OpenStack-Magnum reading sources... [ 14%] How-to-Create-a-Kubernetes-Cluster-Using-Eumetsat-Elasticity-OpenStack-Magnum reading sources... [ 16%] How-to-Create-a-Router-on-Eumetsat-Elasticity-OpenStack-Magnum reading sources... [ 17%] How-to-Create-and-Return-a-Floating-IP-Address-on-Eumetsat-Elasticity-OpenStack-Magnum reading sources... [ 18%] How-to-Use-Security-Groups-to-Tighten-Security-Using-Eumetsat-Elasticity-OpenStack-Magnum reading sources... [ 20%] Volume-based-vs-Ephemeral-based-Storage-for-Kubernetes-Clusters-on-Eumetsat-Elasticity-OpenStack-Magnum reading sources... [ 21%] accesslisteousingboto3 reading sources... [ 22%] accessusings3cmd reading sources... [ 24%] accessvmfromconsole reading sources... [ 25%] accessvsusingnames reading sources... [ 26%] addremovefip reading sources... [ 28%] backupaninstance reading sources... [ 29%] cannotaccess reading sources... [ 30%] cannotaccesseodata reading sources... [ 32%] cantaccesseodata reading sources... [ 33%] cantpingvm reading sources... [ 34%] clonevm reading sources... [ 36%] connectviasshlinux reading sources... [ 37%] connectviasshwin reading sources... [ 38%] createanetworkwithrouter reading sources... [ 40%] createasetofvms reading sources... [ 41%] deletelargebucket reading sources... [ 42%] downloadeodatausingboto3 reading sources... [ 44%] eodataaccess reading sources... [ 45%] eodatagoofys reading sources... [ 46%] eodatas3fs reading sources... [ 48%] ephemeralvspersistentstorage reading sources... [ 49%] exportvolumenfs reading sources... [ 50%] exportvolumeovernfs reading sources... [ 52%] extendvolumelinux reading sources... [ 53%] fixconsole reading sources... [ 54%] generateec2 reading sources... [ 56%] howtoaccesseodata reading sources... [ 57%] howtocreatenewlinuxgpu reading sources... [ 58%] howtousedocker reading sources... [ 60%] index reading sources... [ 61%] keypairopenstack reading sources... [ 62%] mounteodatausings3protocol reading sources... [ 64%] mountobjectstorage reading sources... [ 65%] mountobjectstoragelinux reading sources... [ 66%] mountssh reading sources... [ 68%] moveadatavolume reading sources... [ 69%] newlinuxvm reading sources... [ 70%] newprojectopenstack reading sources... [ 72%] objectsobjectstorage reading sources... [ 73%] objectstorage reading sources... [ 74%] opennewports reading sources... [ 76%] openstackdomain reading sources... [ 77%] openstacklinux reading sources... [ 78%] openstackproject reading sources... [ 80%] pythonvirtualenv reading sources... [ 81%] remotetransfer reading sources... [ 82%] s3cmd-download reading sources... [ 84%] s3fscache reading sources... [ 85%] sshkeypair reading sources... [ 86%] sshkeywebconsole reading sources... [ 88%] startavmfromasnapshot reading sources... [ 89%] statuspower reading sources... [ 90%] test reading sources... [ 92%] uploadimageusingopcli reading sources... [ 93%] vmnewvolumeno reading sources... [ 94%] vmnewvolumeyes reading sources... [ 96%] vmvisible reading sources... [ 97%] volumesnapshot reading sources... [ 98%] volumesnapshotinheritance reading sources... [100%] vpnaas /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/accesslisteousingboto3.rst:2: WARNING: Title underline too short. How to access/list EODATA using boto3? #### /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/accesslisteousingboto3.rst:5: WARNING: Explicit markup ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/accesslisteousingboto3.rst:6: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/accesslisteousingboto3.rst:9: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/accesslisteousingboto3.rst:10: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/accesslisteousingboto3.rst:13: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/accesslisteousingboto3.rst:14: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/accesslisteousingboto3.rst:23: WARNING: Bullet list ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/accesslisteousingboto3.rst:24: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/accesslisteousingboto3.rst:38: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/accesslisteousingboto3.rst:39: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/accesslisteousingboto3.rst:46: WARNING: Bullet list ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/accesslisteousingboto3.rst:47: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/accesslisteousingboto3.rst:69: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/accessusings3cmd.rst:93: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/addremovefip.rst:10: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/addremovefip.rst:14: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/addremovefip.rst:23: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/addremovefip.rst:27: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/addremovefip.rst:50: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/addremovefip.rst:55: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/addremovefip.rst:61: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/cannotaccesseodata.rst:7: ERROR: Unexpected indentation. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/cannotaccesseodata.rst:8: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/connectviasshwin.rst:14: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/createanetworkwithrouter.rst:2: WARNING: Title underline too short. How to create a network with router in Horizon Dashboard? ======================================================== /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/createanetworkwithrouter.rst:12: WARNING: Explicit markup ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/deletelargebucket.rst:2: WARNING: Title underline too short. How to delete large S3 bucket? ==== /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/deletelargebucket.rst:4: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/deletelargebucket.rst:9: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/deletelargebucket.rst:10: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/deletelargebucket.rst:14: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/deletelargebucket.rst:15: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/deletelargebucket.rst:24: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/deletelargebucket.rst:25: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/deletelargebucket.rst:38: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/deletelargebucket.rst:39: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/deletelargebucket.rst:47: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/deletelargebucket.rst:51: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/deletelargebucket.rst:52: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/deletelargebucket.rst:63: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/deletelargebucket.rst:64: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/downloadeodatausingboto3.rst:2: WARNING: Title underline too short. How to download EODATA file using boto3? ==== /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/downloadeodatausingboto3.rst:4: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/downloadeodatausingboto3.rst:6: WARNING: Explicit markup ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/downloadeodatausingboto3.rst:7: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/downloadeodatausingboto3.rst:10: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/downloadeodatausingboto3.rst:11: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/downloadeodatausingboto3.rst:14: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/downloadeodatausingboto3.rst:15: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/downloadeodatausingboto3.rst:34: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/downloadeodatausingboto3.rst:35: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/downloadeodatausingboto3.rst:38: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/downloadeodatausingboto3.rst:39: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodataaccess.rst:2: WARNING: Title underline too short. EODATA access - S3 or NFS? ==== /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodataaccess.rst:4: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodataaccess.rst:11: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodataaccess.rst:12: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodataaccess.rst:17: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodataaccess.rst:18: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodataaccess.rst:24: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodataaccess.rst:25: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodataaccess.rst:29: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/eodataaccess.rst:30: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/howtocreatenewlinuxgpu.rst:2: WARNING: Title underline too short. How To Create a New Linux VM With NVIDIA Virtual GPU in Openstack Dashboard (Horizon)? ==================================================================================== /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/index.rst:7: WARNING: toctree contains reference to nonexisting document 'attachvolumetovm%3C2tb' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/index.rst:7: WARNING: toctree contains reference to nonexisting document 'howmanyobjectsobjectstorage' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/index.rst:7: WARNING: toctree contains reference to nonexisting document 'howtomountdriveoverssh' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/index.rst:7: WARNING: toctree contains reference to nonexisting document 'accessvmsusingnames' /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/openstacklinux.rst:10: ERROR: Content block expected for the "Attention" directive; none found. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/pythonvirtualenv.rst:2: WARNING: Title underline too short. How to install Python virtualenv/virtualenvwrapper ==== /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/pythonvirtualenv.rst:4: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/pythonvirtualenv.rst:17: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/pythonvirtualenv.rst:18: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/pythonvirtualenv.rst:24: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/pythonvirtualenv.rst:25: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/pythonvirtualenv.rst:29: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/pythonvirtualenv.rst:30: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/pythonvirtualenv.rst:34: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/pythonvirtualenv.rst:35: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/pythonvirtualenv.rst:41: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/pythonvirtualenv.rst:42: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/pythonvirtualenv.rst:50: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/pythonvirtualenv.rst:51: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/pythonvirtualenv.rst:56: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/pythonvirtualenv.rst:57: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/pythonvirtualenv.rst:74: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/pythonvirtualenv.rst:88: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/pythonvirtualenv.rst:89: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/pythonvirtualenv.rst:93: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/pythonvirtualenv.rst:94: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/pythonvirtualenv.rst:99: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/pythonvirtualenv.rst:100: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/pythonvirtualenv.rst:105: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/pythonvirtualenv.rst:106: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/pythonvirtualenv.rst:111: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/pythonvirtualenv.rst:112: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3cmd-download.rst:2: WARNING: Title underline too short. How to download EODATA files using s3cmd? ==== /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3cmd-download.rst:4: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3cmd-download.rst:8: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3cmd-download.rst:9: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3cmd-download.rst:16: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3cmd-download.rst:17: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3cmd-download.rst:26: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3cmd-download.rst:27: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3cmd-download.rst:34: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3cmd-download.rst:35: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3cmd-download.rst:40: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3cmd-download.rst:41: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3cmd-download.rst:48: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3cmd-download.rst:49: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3cmd-download.rst:54: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3cmd-download.rst:55: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3cmd-download.rst:67: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3cmd-download.rst:68: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3cmd-download.rst:78: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3cmd-download.rst:79: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3cmd-download.rst:83: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3cmd-download.rst:84: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3fscache.rst:16: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/s3fscache.rst:29: WARNING: Literal block ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/sshkeypair.rst:5: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/sshkeypair.rst:12: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/sshkeypair.rst:19: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/sshkeypair.rst:50: WARNING: Line block ends without a blank line. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/startavmfromasnapshot.rst:2: WARNING: Duplicate explicit target name: "how to create new vm in openstack dashboard (horizon)?". /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/test.rst:13: ERROR: Error parsing content block for the "list-table" directive: exactly one bullet list expected. .. list-table:: * - .. figure:: net8.png hfhgfffhfhhfhfhf /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/vpnaas.rst:2: WARNING: Title underline too short. [DRAFT]How to run and configure Firewall as a service and VPN as a service? ======================================================== /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/vpnaas.rst:17: WARNING: Explicit markup ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/vpnaas.rst:23: WARNING: Explicit markup ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/vpnaas.rst:33: WARNING: Explicit markup ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/vpnaas.rst:54: WARNING: Explicit markup ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/vpnaas.rst:60: WARNING: Explicit markup ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/vpnaas.rst:66: WARNING: Explicit markup ends without a blank line; unexpected unindent. looking for now-outdated files... none found pickling environment... done checking consistency... /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/accessvsusingnames.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/mountssh.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/objectsobjectstorage.rst: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/test.rst: WARNING: document isn't included in any toctree done preparing documents... done writing output... [ 1%] Autoscaling-Kubernetes-Cluster-Resources-on-Eumetsat-Elasticity-OpenStack-Magnum writing output... [ 2%] Creating-Additional-Nodegroups-in-Kubernetes-Cluster-on-Eumetsat-Elasticity-OpenStack-Magnum writing output... [ 4%] How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-Eumetsat-Elasticity-OpenStack-Magnum writing output... [ 5%] How-To-Create-API-Server-LoadBalancer-for-Kubernetes-Cluster-On-Eumetsat-Elasticity-OpenStack-Magnum writing output... [ 6%] How-To-Create-Floating-IP-for-Servers-on-Eumetsat-Elasticity-OpenStack-Magnum writing output... [ 8%] How-To-Create-and-Manage-Networks-on-Eumetsat-Elasticity-OpenStack-Magnum writing output... [ 9%] How-To-Install-OpenStack-and-Magnum-Clients-for-Command-Line-Interface-to-Eumetsat-Elasticity-Horizon writing output... [ 10%] How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-Eumetsat-Elasticity-OpenStack-Magnum writing output... [ 12%] How-to-Connect-Two-Instances-Through-a-Private-Network-on-Eumetsat-Elasticity-OpenStack-Magnum writing output... [ 13%] How-to-Create-a-Kubernetes-Cluster-Template-Using-Eumetsat-Elasticity-OpenStack-Magnum writing output... [ 14%] How-to-Create-a-Kubernetes-Cluster-Using-Eumetsat-Elasticity-OpenStack-Magnum writing output... [ 16%] How-to-Create-a-Router-on-Eumetsat-Elasticity-OpenStack-Magnum writing output... [ 17%] How-to-Create-and-Return-a-Floating-IP-Address-on-Eumetsat-Elasticity-OpenStack-Magnum writing output... [ 18%] How-to-Use-Security-Groups-to-Tighten-Security-Using-Eumetsat-Elasticity-OpenStack-Magnum writing output... [ 20%] Volume-based-vs-Ephemeral-based-Storage-for-Kubernetes-Clusters-on-Eumetsat-Elasticity-OpenStack-Magnum writing output... [ 21%] accesslisteousingboto3 writing output... [ 22%] accessusings3cmd writing output... [ 24%] accessvmfromconsole writing output... [ 25%] accessvsusingnames writing output... [ 26%] addremovefip writing output... [ 28%] backupaninstance writing output... [ 29%] cannotaccess writing output... [ 30%] cannotaccesseodata writing output... [ 32%] cantaccesseodata writing output... [ 33%] cantpingvm writing output... [ 34%] clonevm writing output... [ 36%] connectviasshlinux writing output... [ 37%] connectviasshwin writing output... [ 38%] createanetworkwithrouter writing output... [ 40%] createasetofvms writing output... [ 41%] deletelargebucket writing output... [ 42%] downloadeodatausingboto3 writing output... [ 44%] eodataaccess writing output... [ 45%] eodatagoofys writing output... [ 46%] eodatas3fs writing output... [ 48%] ephemeralvspersistentstorage writing output... [ 49%] exportvolumenfs writing output... [ 50%] exportvolumeovernfs writing output... [ 52%] extendvolumelinux writing output... [ 53%] fixconsole writing output... [ 54%] generateec2 writing output... [ 56%] howtoaccesseodata writing output... [ 57%] howtocreatenewlinuxgpu writing output... [ 58%] howtousedocker writing output... [ 60%] index writing output... [ 61%] keypairopenstack writing output... [ 62%] mounteodatausings3protocol writing output... [ 64%] mountobjectstorage writing output... [ 65%] mountobjectstoragelinux writing output... [ 66%] mountssh writing output... [ 68%] moveadatavolume writing output... [ 69%] newlinuxvm writing output... [ 70%] newprojectopenstack writing output... [ 72%] objectsobjectstorage writing output... [ 73%] objectstorage writing output... [ 74%] opennewports writing output... [ 76%] openstackdomain writing output... [ 77%] openstacklinux writing output... [ 78%] openstackproject writing output... [ 80%] pythonvirtualenv writing output... [ 81%] remotetransfer writing output... [ 82%] s3cmd-download writing output... [ 84%] s3fscache writing output... [ 85%] sshkeypair writing output... [ 86%] sshkeywebconsole writing output... [ 88%] startavmfromasnapshot writing output... [ 89%] statuspower writing output... [ 90%] test writing output... [ 92%] uploadimageusingopcli writing output... [ 93%] vmnewvolumeno writing output... [ 94%] vmnewvolumeyes writing output... [ 96%] vmvisible writing output... [ 97%] volumesnapshot writing output... [ 98%] volumesnapshotinheritance writing output... [100%] vpnaas generating indices... /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/howtoaccesseodata.rst:11: WARNING: Could not lex literal_block as "c++". Highlighting skipped. genindex done writing additional pages... search done copying images... [ 0%] size_screen_filled.png copying images... [ 0%] clusters.png copying images... [ 0%] enabled.png copying images... [ 1%] cluster_successful.png copying images... [ 1%] copy.png copying images... [ 1%] labels.png copying images... [ 1%] present_clusters.png copying images... [ 2%] listing_nodegroups.png copying images... [ 2%] created_new_nodegroup.png copying images... [ 2%] stacks_creations.png copying images... [ 2%] cluster_inside.png copying images... [ 3%] role_test.png copying images... [ 3%] table_testing.png copying images... [ 3%] filtered_cirros.png copying images... [ 4%] nodegroup_resized.png copying images... [ 4%] nodegroups_network_graph.png copying images... [ 4%] security_group_list_left.png copying images... [ 4%] port_6443.png copying images... [ 5%] get_nodes_large.png copying images... [ 5%] kubectl_help.png copying images... [ 5%] dashboard_installed.png copying images... [ 5%] starting_to_server.png copying images... [ 6%] dashboard2.png copying images... [ 6%] dashboard_view.png copying images... [ 6%] created_clusters.png copying images... [ 7%] kubelbtrue_nodes.png copying images... [ 7%] networks.png copying images... [ 7%] kubelbfalse.png copying images... [ 7%] loaders.png copying images... [ 8%] generated_clusters.png copying images... [ 8%] floating_ips_present.png copying images... [ 8%] horizon_floating_ips.png copying images... [ 8%] network_list.png copying images... [ 9%] create_myprivatenetwork.png copying images... [ 9%] create_subnet.png copying images... [ 9%] subnet_details.png copying images... [ 10%] new_network.png copying images... [ 10%] privatenetwork_port.png copying images... [ 10%] normal_view.png copying images... [ 10%] cli-network-list.png copying images... [ 11%] network_create.png copying images... [ 11%] new_network_list.png copying images... [ 11%] creaet_subnet1.png copying images... [ 11%] show_net1.png copying images... [ 12%] horizon_network_check.png copying images... [ 12%] net1_port.png copying images... [ 12%] api_access_erased.png copying images... [ 13%] opencloud_yaml.png copying images... [ 13%] openrc.png copying images... [ 13%] enter_password.png copying images... [ 13%] openstack_cli.png copying images... [ 14%] openstack_help.png copying images... [ 14%] openstack_vim.png copying images... [ 14%] networks_list.png copying images... [ 14%] openstack_coe.png copying images... [ 15%] openstack_coe_cluster_list.png copying images... [ 15%] cluster_list_horizon.png copying images... [ 15%] flavors_list.png copying images... [ 15%] horizon_flavors.png copying images... [ 16%] kubernetes_url.png copying images... [ 16%] api_address.png copying images... [ 16%] cluster_created.png copying images... [ 17%] create_cluster.png copying images... [ 17%] overview.png copying images... [ 17%] after_delete_cluster.png copying images... [ 17%] list_instances.png copying images... [ 18%] create_instance.png copying images... [ 18%] choose_centos.png copying images... [ 18%] flavor_centos.png copying images... [ 18%] select_network.png copying images... [ 19%] centos_created.png copying images... [ 19%] two_instances.png copying images... [ 19%] network_2.png copying images... [ 20%] centos_console.png copying images... [ 20%] centos_start.png copying images... [ 20%] eoconsole_user.png copying images... [ 20%] ping_centos_ubuntu.png copying images... [ 21%] console_ubuntu.png copying images... [ 21%] ubuntu_ip_a.png copying images... [ 21%] from_ubuntu_to_centos.png copying images... [ 21%] cluster_templates.png copying images... [ 22%] create_cluster_template.png copying images... [ 22%] engine.png copying images... [ 22%] info_field_filledin.png copying images... [ 23%] node_spec.png copying images... [ 23%] question_mark.png copying images... [ 23%] image.png copying images... [ 23%] flavors.png copying images... [ 24%] flavor_list.png copying images... [ 24%] security_resources.png copying images... [ 24%] node_spec_entered.png copying images... [ 24%] network_window.png copying images... [ 25%] network_driver.png copying images... [ 25%] external_network.png copying images... [ 25%] select_network_1.png copying images... [ 26%] private_subnet.png copying images... [ 26%] master_lb_floating_ip.png copying images... [ 26%] network_filled_in.png copying images... [ 26%] labels_in_templates.png copying images... [ 27%] finished_template_with_labels.png copying images... [ 27%] new_template.png copying images... [ 27%] cluster_template_parameters.png copying images... [ 27%] clusters_command.png copying images... [ 28%] create_new_cluster.png copying images... [ 28%] create_new_cluster_values.png copying images... [ 28%] flavor_of_master_nodes.png copying images... [ 28%] network_option.png copying images... [ 29%] network_access2.png copying images... [ 29%] unable_to_create_a_cluster.png copying images... [ 29%] cluster_forming.png copying images... [ 30%] creation_in_progress.png copying images... [ 30%] network_topology_with_labels.png copying images... [ 30%] new_instances.png copying images... [ 30%] cluster_scaled.png copying images... [ 31%] list_of_routers.png copying images... [ 31%] routers_external.png copying images... [ 31%] create_router.png copying images... [ 31%] difference.png copying images... [ 32%] two_routers.png copying images... [ 32%] gateway.png copying images... [ 32%] interfaces.png copying images... [ 33%] choose_subnet.png copying images... [ 33%] connectes.png copying images... [ 33%] list_routers_1.png copying images... [ 33%] create_router_cli.png copying images... [ 34%] roueter1_connected.png copying images... [ 34%] router_cli_created.png copying images... [ 34%] list_floatin_ips.png copying images... [ 34%] manage.png copying images... [ 35%] allocate.png copying images... [ 35%] port.png copying images... [ 35%] port_selected.png copying images... [ 36%] sssdsd.png copying images... [ 36%] disassociation.png copying images... [ 36%] floating_ip_commands.png copying images... [ 36%] list.png copying images... [ 37%] created.png copying images... [ 37%] security_groups.png copying images... [ 37%] delete_security_group.png copying images... [ 37%] manage_security_group_rules.png copying images... [ 38%] extended_default_security_group.png copying images... [ 38%] normal_rules.png copying images... [ 38%] normal_master_rules.png copying images... [ 39%] minion_security_rules.png copying images... [ 39%] quota_for_security_rules.png copying images... [ 39%] add_security_groups.png copying images... [ 39%] dockerspace_created.png copying images... [ 40%] instances.png copying images... [ 40%] volumes.png copying images... [ 40%] nano_redis_yaml.png copying images... [ 40%] redis-data.png copying images... [ 41%] devvdb.png copying images... [ 41%] instance.png copying images... [ 41%] redis_kill.png copying images... [ 42%] final_result.png copying images... [ 42%] accessvm1.png copying images... [ 42%] accessvm2.png copying images... [ 42%] accessvm3.png copying images... [ 43%] accessvm4.png copying images... [ 43%] accessvm5.png copying images... [ 43%] fip1.png copying images... [ 43%] fip2.png copying images... [ 44%] fip3.png copying images... [ 44%] fip4.png copying images... [ 44%] fip5.png copying images... [ 44%] fip6.png copying images... [ 45%] fip7.png copying images... [ 45%] fip8.png copying images... [ 45%] fip9.png copying images... [ 46%] backupinst1.png copying images... [ 46%] backupinst2.png copying images... [ 46%] backupinst3.png copying images... [ 46%] backupinst4.png copying images... [ 47%] backupinst5.png copying images... [ 47%] cantaccess1.png copying images... [ 47%] cantaccess2.png copying images... [ 47%] clone1.png copying images... [ 48%] clone2.png copying images... [ 48%] clone3.png copying images... [ 48%] ssh_linux1.png copying images... [ 49%] ssh_linux2.png copying images... [ 49%] cmd1.png copying images... [ 49%] cmd2.png copying images... [ 49%] net1.png copying images... [ 50%] net2.png copying images... [ 50%] net3.png copying images... [ 50%] net4.png copying images... [ 50%] net5.png copying images... [ 51%] net6.png copying images... [ 51%] net7.png copying images... [ 51%] net8.png copying images... [ 52%] net9.png copying images... [ 52%] net10.png copying images... [ 52%] net11.png copying images... [ 52%] net12.png copying images... [ 53%] net13.png copying images... [ 53%] orch1.png copying images... [ 53%] orch2.png copying images... [ 53%] orch3.png copying images... [ 54%] orch4.png copying images... [ 54%] vol1.png copying images... [ 54%] vol2.png copying images... [ 55%] vol3.png copying images... [ 55%] vol4.png copying images... [ 55%] vol5.png copying images... [ 55%] vol6.png copying images... [ 56%] fixconsole.png copying images... [ 56%] ec2_1.png copying images... [ 56%] ec2_2.png copying images... [ 56%] ec2_3.png copying images... [ 57%] eodata_horizon.png copying images... [ 57%] 1.png copying images... [ 57%] 2.png copying images... [ 57%] 3.png copying images... [ 58%] 17.png copying images... [ 58%] 18.png copying images... [ 58%] 16.png copying images... [ 59%] 19.png copying images... [ 59%] 5.png copying images... [ 59%] 6.png copying images... [ 59%] 7.png copying images... [ 60%] 8.png copying images... [ 60%] 9.png copying images... [ 60%] 10.png copying images... [ 60%] 11.png copying images... [ 61%] 12.png copying images... [ 61%] 13.png copying images... [ 61%] 14.png copying images... [ 62%] keypair1.png copying images... [ 62%] keypair2.png copying images... [ 62%] keypair3.png copying images... [ 62%] keypair4.png copying images... [ 63%] keypair5.png copying images... [ 63%] mountos1.png copying images... [ 63%] mountos2.png copying images... [ 63%] mountos3.png copying images... [ 64%] puttymenu.png copying images... [ 64%] puttyopenssh.png copying images... [ 64%] sshfsmenu.png copying images... [ 65%] sshfsaddconn.png copying images... [ 65%] sshfsconnectionfilled.png copying images... [ 65%] sshfsconnection.png copying images... [ 65%] thispc.png copying images... [ 66%] newvm1.png copying images... [ 66%] newvm2.png copying images... [ 66%] newvm3.png copying images... [ 66%] newvm4.png copying images... [ 67%] newvm5.png copying images... [ 67%] newvm6.png copying images... [ 67%] newvm7.png copying images... [ 68%] newvm8.png copying images... [ 68%] newvm9.png copying images... [ 68%] newvm10.png copying images... [ 68%] newvm11.png copying images... [ 69%] newvm12.png copying images... [ 69%] newvm13.png copying images... [ 69%] 4.png copying images... [ 69%] objectstorage1.png copying images... [ 70%] objectstorage2.png copying images... [ 70%] objectstorage3.png copying images... [ 70%] objectstorage4.png copying images... [ 71%] objectstorage5.png copying images... [ 71%] objectstorage6.png copying images... [ 71%] objectstorage7.png copying images... [ 71%] objectstorage8.png copying images... [ 72%] objectstorage9.png copying images... [ 72%] objectstorage10.png copying images... [ 72%] objectstorage11.png copying images... [ 72%] objectstorage12.png copying images... [ 73%] objectstorage13.png copying images... [ 73%] objectstorage14.png copying images... [ 73%] objectstorage15.png copying images... [ 73%] objectstorage16.png copying images... [ 74%] objectstorage17.png copying images... [ 74%] objectstorage18.png copying images... [ 74%] objectstorage19.png copying images... [ 75%] objectstorage20.png copying images... [ 75%] objectstorage21.png copying images... [ 75%] objectstorage22.png copying images... [ 75%] objectstorage23.png copying images... [ 76%] objectstorage24.png copying images... [ 76%] objectstorage25.png copying images... [ 76%] objectstorage26.png copying images... [ 76%] domain1.png copying images... [ 77%] domain2.png copying images... [ 77%] domain3.png copying images... [ 77%] openstacklinux1.png copying images... [ 78%] openstacklinux2.png copying images... [ 78%] openstacklinux3.png copying images... [ 78%] project1.png copying images... [ 78%] project2.png copying images... [ 79%] ssh1.png copying images... [ 79%] ssh2.png copying images... [ 79%] ssh3.png copying images... [ 79%] pastebin1.png copying images... [ 80%] pastebin2.png copying images... [ 80%] pastebin3.png copying images... [ 80%] pastebin4.png copying images... [ 81%] pastebin5.png copying images... [ 81%] snap1.png copying images... [ 81%] snap2.png copying images... [ 81%] snap3.png copying images... [ 82%] snap4.png copying images... [ 82%] snap5.png copying images... [ 82%] snap6.png copying images... [ 82%] snap7.png copying images... [ 83%] snap8.png copying images... [ 83%] snap1.1.png copying images... [ 83%] snap2.1.png copying images... [ 84%] snap3.1.png copying images... [ 84%] snap4.1.png copying images... [ 84%] snap5.1.png copying images... [ 84%] snap6.1.png copying images... [ 85%] statuspower.png copying images... [ 85%] upload1.png copying images... [ 85%] upload2.png copying images... [ 85%] upload3.png copying images... [ 86%] volno1.png copying images... [ 86%] volno2.png copying images... [ 86%] volno3.png copying images... [ 86%] volno4.png copying images... [ 87%] volno5.png copying images... [ 87%] volyes1.png copying images... [ 87%] volyes2.png copying images... [ 88%] volyes3.png copying images... [ 88%] volyes4.png copying images... [ 88%] volyes5.png copying images... [ 88%] volyes6.png copying images... [ 89%] volyes7.png copying images... [ 89%] volyes8.png copying images... [ 89%] volyes9.png copying images... [ 89%] volyes10.png copying images... [ 90%] volyes11.png copying images... [ 90%] volyes12.png copying images... [ 90%] volyes13.png copying images... [ 91%] volyes14.png copying images... [ 91%] volyes15.png copying images... [ 91%] volyes16.png copying images... [ 91%] vsnap1.png copying images... [ 92%] vsnap2.png copying images... [ 92%] vsnap3.png copying images... [ 92%] vsnap4.png copying images... [ 92%] vsnap5.png copying images... [ 93%] scrn1.png copying images... [ 93%] scrn2.png copying images... [ 93%] scrn3.png copying images... [ 94%] scrn4.png copying images... [ 94%] scrn5.png copying images... [ 94%] scrn6.png copying images... [ 94%] scrn7.png copying images... [ 95%] scrn8.png copying images... [ 95%] scrn9.png copying images... [ 95%] scrn10.png copying images... [ 95%] scrn11.png copying images... [ 96%] scrn12.png copying images... [ 96%] scrn13.png copying images... [ 96%] scrn14.png copying images... [ 97%] scrn15.png copying images... [ 97%] scrn16.png copying images... [ 97%] scrn17.png copying images... [ 97%] scrn18.png copying images... [ 98%] scrn19.png copying images... [ 98%] scrn20.png copying images... [ 98%] scrn22.png copying images... [ 98%] scrn23.png copying images... [ 99%] scrn24.png copying images... [ 99%] scrn26.png copying images... [ 99%] scrn27.png copying images... [100%] scrn28.png copying static files... done copying extra files... done dumping search index in English (code: en)... done dumping object inventory... done build succeeded, 140 warnings. The HTML pages are in _build/html. Updating searchtools for Read the Docs search...