Read the Docs build information Build id: 828397 Project: tabella-finland-oy-tabella-manual-eng Version: latest Commit: 8690b1526a9918139d063cdca39eabfee714caf8 Date: 2022-01-20T05:15:46.306946Z State: finished Success: False [rtd-command-info] start-time: 2022-01-20T05:15:58.836975Z, end-time: 2022-01-20T05:16:09.258917Z, duration: 10, exit-code: 0 git clone --no-single-branch --depth 50 git@github.com:tabella/manual.git . Cloning into '.'... Warning: Permanently added 'github.com,192.30.255.112' (ECDSA) to the list of known hosts. [rtd-command-info] start-time: 2022-01-20T05:16:09.450792Z, end-time: 2022-01-20T05:16:09.838154Z, duration: 0, exit-code: 0 git checkout --force origin/master Note: checking out 'origin/master'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by performing another checkout. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -b with the checkout command again. Example: git checkout -b HEAD is now at 8690b15 Poistettu maintain-trees [rtd-command-info] start-time: 2022-01-20T05:16:10.021686Z, end-time: 2022-01-20T05:16:10.091586Z, duration: 0, exit-code: 0 git clean -d -f -f [rtd-command-info] start-time: 2022-01-20T05:16:11.406369Z, end-time: 2022-01-20T05:16:15.617249Z, duration: 4, exit-code: 0 python3.8 -mvirtualenv Using base prefix '/home/docs/.pyenv/versions/3.8.6' New python executable in /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/bin/python3.8 Also creating executable in /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/bin/python Installing setuptools, pip, wheel... done. [rtd-command-info] start-time: 2022-01-20T05:16:15.812269Z, end-time: 2022-01-20T05:16:17.589265Z, duration: 1, exit-code: 0 python -m pip install --upgrade --no-cache-dir pip setuptools<58.3.0 Requirement already satisfied: pip in /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages (21.3.1) Collecting setuptools<58.3.0 Downloading setuptools-58.2.0-py3-none-any.whl (946 kB) Installing collected packages: setuptools Attempting uninstall: setuptools Found existing installation: setuptools 60.5.0 Uninstalling setuptools-60.5.0: Successfully uninstalled setuptools-60.5.0 Successfully installed setuptools-58.2.0 [rtd-command-info] start-time: 2022-01-20T05:16:17.782804Z, end-time: 2022-01-20T05:16:43.498642Z, duration: 25, exit-code: 0 python -m pip install --upgrade --no-cache-dir mock==1.0.1 pillow==5.4.1 alabaster>=0.7,<0.8,!=0.7.5 commonmark==0.8.1 recommonmark==0.5.0 sphinx<2 sphinx-rtd-theme<0.5 readthedocs-sphinx-ext<2.2 Collecting mock==1.0.1 Downloading mock-1.0.1.zip (861 kB) Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting pillow==5.4.1 Downloading Pillow-5.4.1.tar.gz (16.0 MB) Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting alabaster!=0.7.5,<0.8,>=0.7 Downloading alabaster-0.7.12-py2.py3-none-any.whl (14 kB) Collecting commonmark==0.8.1 Downloading commonmark-0.8.1-py2.py3-none-any.whl (47 kB) Collecting recommonmark==0.5.0 Downloading recommonmark-0.5.0-py2.py3-none-any.whl (9.8 kB) Collecting sphinx<2 Downloading Sphinx-1.8.6-py2.py3-none-any.whl (3.1 MB) Collecting sphinx-rtd-theme<0.5 Downloading sphinx_rtd_theme-0.4.3-py2.py3-none-any.whl (6.4 MB) Collecting readthedocs-sphinx-ext<2.2 Downloading readthedocs_sphinx_ext-2.1.4-py2.py3-none-any.whl (29 kB) Collecting future Downloading future-0.18.2.tar.gz (829 kB) Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting docutils>=0.11 Downloading docutils-0.18.1-py2.py3-none-any.whl (570 kB) Collecting Jinja2>=2.3 Downloading Jinja2-3.0.3-py3-none-any.whl (133 kB) Collecting requests>=2.0.0 Downloading requests-2.27.1-py2.py3-none-any.whl (63 kB) Collecting docutils>=0.11 Downloading docutils-0.17.1-py2.py3-none-any.whl (575 kB) Collecting snowballstemmer>=1.1 Downloading snowballstemmer-2.2.0-py2.py3-none-any.whl (93 kB) Collecting babel!=2.0,>=1.3 Downloading Babel-2.9.1-py2.py3-none-any.whl (8.8 MB) Collecting six>=1.5 Downloading six-1.16.0-py2.py3-none-any.whl (11 kB) Collecting Pygments>=2.0 Downloading Pygments-2.11.2-py3-none-any.whl (1.1 MB) Requirement already satisfied: setuptools in /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages (from sphinx<2) (58.2.0) Collecting imagesize Downloading imagesize-1.3.0-py2.py3-none-any.whl (5.2 kB) Collecting packaging Downloading packaging-21.3-py3-none-any.whl (40 kB) Collecting sphinxcontrib-websupport Downloading sphinxcontrib_websupport-1.2.4-py2.py3-none-any.whl (39 kB) Collecting pytz>=2015.7 Downloading pytz-2021.3-py2.py3-none-any.whl (503 kB) Collecting MarkupSafe>=2.0 Downloading MarkupSafe-2.0.1-cp38-cp38-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_12_x86_64.manylinux2010_x86_64.whl (30 kB) Collecting certifi>=2017.4.17 Downloading certifi-2021.10.8-py2.py3-none-any.whl (149 kB) Collecting idna<4,>=2.5 Downloading idna-3.3-py3-none-any.whl (61 kB) Collecting urllib3<1.27,>=1.21.1 Downloading urllib3-1.26.8-py2.py3-none-any.whl (138 kB) Collecting charset-normalizer~=2.0.0 Downloading charset_normalizer-2.0.10-py3-none-any.whl (39 kB) Collecting pyparsing!=3.0.5,>=2.0.2 Downloading pyparsing-3.0.6-py3-none-any.whl (97 kB) Collecting sphinxcontrib-serializinghtml Downloading sphinxcontrib_serializinghtml-1.1.5-py2.py3-none-any.whl (94 kB) Building wheels for collected packages: mock, pillow, future Building wheel for mock (setup.py): started Building wheel for mock (setup.py): finished with status 'done' Created wheel for mock: filename=mock-1.0.1-py3-none-any.whl size=23773 sha256=69585012e6d069232b978e388ce3c85bb396b31a2c922271cd5d4d48de1f86ad Stored in directory: /tmp/pip-ephem-wheel-cache-tm07s8w1/wheels/41/7c/21/90057f91c6ead7c77a90c52d6e85ca48bf82d8b0d3f8dfbb65 Building wheel for pillow (setup.py): started Building wheel for pillow (setup.py): finished with status 'done' Created wheel for pillow: filename=Pillow-5.4.1-cp38-cp38-linux_x86_64.whl size=1259991 sha256=92502db3ffd262cf447c398112ff7619c2d3bf33c4ff85f3473f0b65d0f6b781 Stored in directory: /tmp/pip-ephem-wheel-cache-tm07s8w1/wheels/5f/a8/6b/5b7b3f764d879214eb03570f74d2b086201eb514e6ffa68d6d Building wheel for future (setup.py): started Building wheel for future (setup.py): finished with status 'done' Created wheel for future: filename=future-0.18.2-py3-none-any.whl size=491070 sha256=2bce2ca86d2b60ab9d6b276108320c8d9e4e6af78e4ca0531aaf01988f83cf3b Stored in directory: /tmp/pip-ephem-wheel-cache-tm07s8w1/wheels/8e/70/28/3d6ccd6e315f65f245da085482a2e1c7d14b90b30f239e2cf4 Successfully built mock pillow future Installing collected packages: urllib3, sphinxcontrib-serializinghtml, pytz, pyparsing, MarkupSafe, idna, charset-normalizer, certifi, sphinxcontrib-websupport, snowballstemmer, six, requests, Pygments, packaging, Jinja2, imagesize, future, docutils, babel, alabaster, sphinx, commonmark, sphinx-rtd-theme, recommonmark, readthedocs-sphinx-ext, pillow, mock Successfully installed Jinja2-3.0.3 MarkupSafe-2.0.1 Pygments-2.11.2 alabaster-0.7.12 babel-2.9.1 certifi-2021.10.8 charset-normalizer-2.0.10 commonmark-0.8.1 docutils-0.17.1 future-0.18.2 idna-3.3 imagesize-1.3.0 mock-1.0.1 packaging-21.3 pillow-5.4.1 pyparsing-3.0.6 pytz-2021.3 readthedocs-sphinx-ext-2.1.4 recommonmark-0.5.0 requests-2.27.1 six-1.16.0 snowballstemmer-2.2.0 sphinx-1.8.6 sphinx-rtd-theme-0.4.3 sphinxcontrib-serializinghtml-1.1.5 sphinxcontrib-websupport-1.2.4 urllib3-1.26.8 [rtd-command-info] start-time: 2022-01-20T05:16:43.668970Z, end-time: 2022-01-20T05:16:48.756489Z, duration: 5, exit-code: 0 python -m pip install --exists-action=w --no-cache-dir -r requirements.txt Collecting sphinx==4.2.0 Downloading Sphinx-4.2.0-py3-none-any.whl (3.1 MB) Requirement already satisfied: sphinx_rtd_theme in /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages (from -r requirements.txt (line 2)) (0.4.3) Collecting sphinx-intl Downloading sphinx-intl-2.0.1.tar.gz (17 kB) Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting sphinx-autobuild Downloading sphinx_autobuild-2021.3.14-py3-none-any.whl (9.9 kB) Collecting sphinxcontrib-images Downloading sphinxcontrib_images-0.9.4-py2.py3-none-any.whl (118 kB) Collecting sphinx_fontawesome Downloading sphinx_fontawesome-0.0.6.tar.gz (22 kB) Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting docutils==0.16 Downloading docutils-0.16-py2.py3-none-any.whl (548 kB) Collecting sphinxcontrib-jsmath Downloading sphinxcontrib_jsmath-1.0.1-py2.py3-none-any.whl (5.1 kB) Collecting sphinxcontrib-devhelp Downloading sphinxcontrib_devhelp-1.0.2-py2.py3-none-any.whl (84 kB) Requirement already satisfied: alabaster<0.8,>=0.7 in /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages (from sphinx==4.2.0->-r requirements.txt (line 1)) (0.7.12) Requirement already satisfied: packaging in /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages (from sphinx==4.2.0->-r requirements.txt (line 1)) (21.3) Requirement already satisfied: snowballstemmer>=1.1 in /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages (from sphinx==4.2.0->-r requirements.txt (line 1)) (2.2.0) Collecting sphinxcontrib-qthelp Downloading sphinxcontrib_qthelp-1.0.3-py2.py3-none-any.whl (90 kB) Requirement already satisfied: babel>=1.3 in /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages (from sphinx==4.2.0->-r requirements.txt (line 1)) (2.9.1) Requirement already satisfied: Jinja2>=2.3 in /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages (from sphinx==4.2.0->-r requirements.txt (line 1)) (3.0.3) Collecting sphinxcontrib-applehelp Downloading sphinxcontrib_applehelp-1.0.2-py2.py3-none-any.whl (121 kB) Requirement already satisfied: requests>=2.5.0 in /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages (from sphinx==4.2.0->-r requirements.txt (line 1)) (2.27.1) Requirement already satisfied: Pygments>=2.0 in /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages (from sphinx==4.2.0->-r requirements.txt (line 1)) (2.11.2) Requirement already satisfied: imagesize in /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages (from sphinx==4.2.0->-r requirements.txt (line 1)) (1.3.0) Requirement already satisfied: setuptools in /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages (from sphinx==4.2.0->-r requirements.txt (line 1)) (58.2.0) Collecting sphinxcontrib-htmlhelp>=2.0.0 Downloading sphinxcontrib_htmlhelp-2.0.0-py2.py3-none-any.whl (100 kB) Requirement already satisfied: sphinxcontrib-serializinghtml>=1.1.5 in /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages (from sphinx==4.2.0->-r requirements.txt (line 1)) (1.1.5) Collecting click Downloading click-8.0.3-py3-none-any.whl (97 kB) Collecting livereload Downloading livereload-2.6.3.tar.gz (25 kB) Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting colorama Downloading colorama-0.4.4-py2.py3-none-any.whl (16 kB) Requirement already satisfied: pytz>=2015.7 in /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages (from babel>=1.3->sphinx==4.2.0->-r requirements.txt (line 1)) (2021.3) Requirement already satisfied: MarkupSafe>=2.0 in /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages (from Jinja2>=2.3->sphinx==4.2.0->-r requirements.txt (line 1)) (2.0.1) Requirement already satisfied: urllib3<1.27,>=1.21.1 in /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages (from requests>=2.5.0->sphinx==4.2.0->-r requirements.txt (line 1)) (1.26.8) Requirement already satisfied: certifi>=2017.4.17 in /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages (from requests>=2.5.0->sphinx==4.2.0->-r requirements.txt (line 1)) (2021.10.8) Requirement already satisfied: charset-normalizer~=2.0.0 in /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages (from requests>=2.5.0->sphinx==4.2.0->-r requirements.txt (line 1)) (2.0.10) Requirement already satisfied: idna<4,>=2.5 in /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages (from requests>=2.5.0->sphinx==4.2.0->-r requirements.txt (line 1)) (3.3) Requirement already satisfied: six in /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages (from livereload->sphinx-autobuild->-r requirements.txt (line 4)) (1.16.0) Collecting tornado Downloading tornado-6.1-cp38-cp38-manylinux2010_x86_64.whl (427 kB) Requirement already satisfied: pyparsing!=3.0.5,>=2.0.2 in /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages (from packaging->sphinx==4.2.0->-r requirements.txt (line 1)) (3.0.6) Building wheels for collected packages: sphinx-intl, sphinx-fontawesome, livereload Building wheel for sphinx-intl (setup.py): started Building wheel for sphinx-intl (setup.py): finished with status 'done' Created wheel for sphinx-intl: filename=sphinx_intl-2.0.1-py3-none-any.whl size=11640 sha256=2b4f920ba6c9041c1cf9f56d1b249022ff51da186c6f96d923addac2417fe8cd Stored in directory: /tmp/pip-ephem-wheel-cache-o8ekuy2v/wheels/f4/a1/a0/ba2289b3bc591e2e0050afdcaf54fbf89812f960b6b386cbb7 Building wheel for sphinx-fontawesome (setup.py): started Building wheel for sphinx-fontawesome (setup.py): finished with status 'done' Created wheel for sphinx-fontawesome: filename=sphinx_fontawesome-0.0.6-py3-none-any.whl size=22631 sha256=1a7730de821fc260d3e9e31033179bdb952c7ff9cfac9e37cd80cce2c54f2b84 Stored in directory: /tmp/pip-ephem-wheel-cache-o8ekuy2v/wheels/e6/a9/a7/52131df9369e6987e76ce692645b8284f48717aa5624072c15 Building wheel for livereload (setup.py): started Building wheel for livereload (setup.py): finished with status 'done' Created wheel for livereload: filename=livereload-2.6.3-py2.py3-none-any.whl size=24724 sha256=ff8fa2bd6459856911307090e7e51b6065f171442f2f160108825d1762cc1ba6 Stored in directory: /tmp/pip-ephem-wheel-cache-o8ekuy2v/wheels/48/d7/34/372e0521bd5c9f6dcdff307e37ef6f9c00c1e1e2afc9707b5c Successfully built sphinx-intl sphinx-fontawesome livereload Installing collected packages: tornado, sphinxcontrib-qthelp, sphinxcontrib-jsmath, sphinxcontrib-htmlhelp, sphinxcontrib-devhelp, sphinxcontrib-applehelp, docutils, sphinx, livereload, colorama, click, sphinxcontrib-images, sphinx-intl, sphinx-fontawesome, sphinx-autobuild Attempting uninstall: docutils Found existing installation: docutils 0.17.1 Uninstalling docutils-0.17.1: Successfully uninstalled docutils-0.17.1 Attempting uninstall: sphinx Found existing installation: Sphinx 1.8.6 Uninstalling Sphinx-1.8.6: Successfully uninstalled Sphinx-1.8.6 Successfully installed click-8.0.3 colorama-0.4.4 docutils-0.16 livereload-2.6.3 sphinx-4.2.0 sphinx-autobuild-2021.3.14 sphinx-fontawesome-0.0.6 sphinx-intl-2.0.1 sphinxcontrib-applehelp-1.0.2 sphinxcontrib-devhelp-1.0.2 sphinxcontrib-htmlhelp-2.0.0 sphinxcontrib-images-0.9.4 sphinxcontrib-jsmath-1.0.1 sphinxcontrib-qthelp-1.0.3 tornado-6.1 [rtd-command-info] start-time: 2022-01-20T05:16:50.112038Z, end-time: 2022-01-20T05:16:50.176611Z, duration: 0, exit-code: 0 cat conf.py # -*- coding: utf-8 -*- # # Configuration file for the Sphinx documentation builder. # # This file does only contain a selection of the most common options. For a # full list see the documentation: # http://www.sphinx-doc.org/en/master/config # -- Path setup -------------------------------------------------------------- # If extensions (or modules to document with autodoc) are in another directory, # add these directories to sys.path here. If the directory is relative to the # documentation root, use os.path.abspath to make it absolute, like shown here. # # import os # import sys # sys.path.insert(0, os.path.abspath('.')) # -- Project information ----------------------------------------------------- project = u'Tabella Manual' copyright = u'2020, Tabella Finland Oy' author = u'Tabella Finland Oy' # The short X.Y version version = u'latest' # The full version, including alpha/beta/rc tags release = u'latest' # -- General configuration --------------------------------------------------- # If your documentation needs a minimal Sphinx version, state it here. # # needs_sphinx = '1.0' # Add any Sphinx extension module names here, as strings. They can be # extensions coming with Sphinx (named 'sphinx.ext.*') or your custom # ones. extensions = [ 'sphinxcontrib.images', 'sphinx_fontawesome', 'sphinx_rtd_theme' ] # Add any paths that contain templates here, relative to this directory. templates_path = ['.templates'] # The suffix(es) of source filenames. # You can specify multiple suffix as a list of string: # # source_suffix = ['.rst', '.md'] source_suffix = '.rst' # The master toctree document. master_doc = 'index' # The language for content autogenerated by Sphinx. Refer to documentation # for a list of supported languages. # # This is also used if you do content translation via gettext catalogs. # Usually you set "language" from the command line for these cases. language = None # List of patterns, relative to source directory, that match files and # directories to ignore when looking for source files. # This pattern also affects html_static_path and html_extra_path. exclude_patterns = [u'.build', 'Thumbs.db', '.DS_Store'] # The name of the Pygments (syntax highlighting) style to use. pygments_style = None # -- Options for HTML output ------------------------------------------------- # The theme to use for HTML and HTML Help pages. See the documentation for # a list of builtin themes. # html_theme = 'sphinx_rtd_theme' html_logo = '.static/Tabella_logo_norm_Low_small.png' # Theme options are theme-specific and customize the look and feel of a theme # further. For a list of options available for each theme, see the # documentation. # html_theme_options = { 'navigation_depth': 4, 'cssfiles': ["https://netdna.bootstrapcdn.com/font-awesome/4.7.0/css/font-awesome.min.css"] } # Add any paths that contain custom static files (such as style sheets) here, # relative to this directory. They are copied after the builtin static files, # so a file named "default.css" will overwrite the builtin "default.css". html_static_path = ['.static'] # Custom sidebar templates, must be a dictionary that maps document names # to template names. # # The default sidebars (for documents that don't match any pattern) are # defined by theme itself. Builtin themes are using these templates by # default: ``['localtoc.html', 'relations.html', 'sourcelink.html', # 'searchbox.html']``. # # html_sidebars = {} # -- Options for HTMLHelp output --------------------------------------------- # Output file base name for HTML help builder. htmlhelp_basename = 'TabellaManualdoc' # -- Options for LaTeX output ------------------------------------------------ latex_elements = { # The paper size ('letterpaper' or 'a4paper'). # # 'papersize': 'letterpaper', # The font size ('10pt', '11pt' or '12pt'). # # 'pointsize': '10pt', # Additional stuff for the LaTeX preamble. # # 'preamble': '', # Latex figure (float) alignment # # 'figure_align': 'htbp', } # Grouping the document tree into LaTeX files. List of tuples # (source start file, target name, title, # author, documentclass [howto, manual, or own class]). latex_documents = [ (master_doc, 'TabellaManual.tex', u'Tabella Manual Documentation', u'Tabella Finland Oy', 'manual'), ] # -- Options for manual page output ------------------------------------------ # One entry per manual page. List of tuples # (source start file, name, description, authors, manual section). man_pages = [ (master_doc, 'tabellamanual', u'Tabella Manual Documentation', [author], 1) ] # -- Options for Texinfo output ---------------------------------------------- # Grouping the document tree into Texinfo files. List of tuples # (source start file, target name, title, author, # dir menu entry, description, category) texinfo_documents = [ (master_doc, 'TabellaManual', u'Tabella Manual Documentation', author, 'TabellaManual', 'One line description of project.', 'Miscellaneous'), ] # -- Options for Epub output ------------------------------------------------- # Bibliographic Dublin Core info. epub_title = project # The unique identifier of the text. This can be a ISBN number # or the project homepage. # # epub_identifier = '' # A unique identification for the text. # # epub_uid = '' # A list of files that should not be packed into the epub file. epub_exclude_files = ['search.html'] html_copy_source = False html_show_sourcelink = False # I18n locale_dirs = ['locale/'] gettext_compact = False #Path to pictures file in another language figure_language_filename = '{path}{language}/{basename}{ext}' #Adding custom stylesheet def setup(app): app.add_css_file('css/custom.css') ########################################################################### # auto-created readthedocs.org specific configuration # ########################################################################### # # The following code was added during an automated build on readthedocs.org # It is auto created and injected for every build. The result is based on the # conf.py.tmpl file found in the readthedocs.org codebase: # https://github.com/rtfd/readthedocs.org/blob/master/readthedocs/doc_builder/templates/doc_builder/conf.py.tmpl # # Note: this file shouldn't rely on extra dependencies. import importlib import sys import os.path # Borrowed from six. PY3 = sys.version_info[0] == 3 string_types = str if PY3 else basestring from sphinx import version_info # Get suffix for proper linking to GitHub # This is deprecated in Sphinx 1.3+, # as each page can have its own suffix if globals().get('source_suffix', False): if isinstance(source_suffix, string_types): SUFFIX = source_suffix elif isinstance(source_suffix, (list, tuple)): # Sphinx >= 1.3 supports list/tuple to define multiple suffixes SUFFIX = source_suffix[0] elif isinstance(source_suffix, dict): # Sphinx >= 1.8 supports a mapping dictionary for multiple suffixes SUFFIX = list(source_suffix.keys())[0] # make a ``list()`` for py2/py3 compatibility else: # default to .rst SUFFIX = '.rst' else: SUFFIX = '.rst' # Add RTD Static Path. Add to the end because it overwrites previous files. if not 'html_static_path' in globals(): html_static_path = [] if os.path.exists('_static'): html_static_path.append('_static') # Add RTD Theme only if they aren't overriding it already using_rtd_theme = ( ( 'html_theme' in globals() and html_theme in ['default'] and # Allow people to bail with a hack of having an html_style 'html_style' not in globals() ) or 'html_theme' not in globals() ) if using_rtd_theme: theme = importlib.import_module('sphinx_rtd_theme') html_theme = 'sphinx_rtd_theme' html_style = None html_theme_options = {} if 'html_theme_path' in globals(): html_theme_path.append(theme.get_html_theme_path()) else: html_theme_path = [theme.get_html_theme_path()] if globals().get('websupport2_base_url', False): websupport2_base_url = 'https://readthedocs.com/websupport' websupport2_static_url = 'https://assets.readthedocs.com/' #Add project information to the template context. context = { 'using_theme': using_rtd_theme, 'html_theme': html_theme, 'current_version': "latest", 'version_slug': "latest", 'MEDIA_URL': "https://media.readthedocs.com/media/", 'STATIC_URL': "https://assets.readthedocs.com/", 'PRODUCTION_DOMAIN': "readthedocs.com", 'versions': [ ("latest", "/en/latest/"), ("2020", "/en/2020/"), ("2019", "/en/2019/"), ], 'downloads': [ ], 'subprojects': [ ], 'slug': 'tabella-finland-oy-tabella-manual-eng', 'name': u'Tabella manual eng', 'rtd_language': u'en', 'programming_language': u'words', 'canonical_url': 'https://tabella-finland-oy-tabella-manual.readthedocs-hosted.com/en/latest/', 'analytics_code': 'None', 'single_version': False, 'conf_py_path': '/', 'api_host': 'https://readthedocs.com', 'github_user': 'tabella', 'proxied_api_host': '/_', 'github_repo': 'manual', 'github_version': 'master', 'display_github': True, 'bitbucket_user': 'None', 'bitbucket_repo': 'None', 'bitbucket_version': 'master', 'display_bitbucket': False, 'gitlab_user': 'None', 'gitlab_repo': 'None', 'gitlab_version': 'master', 'display_gitlab': False, 'READTHEDOCS': True, 'using_theme': (html_theme == "default"), 'new_theme': (html_theme == "sphinx_rtd_theme"), 'source_suffix': SUFFIX, 'ad_free': False, 'docsearch_disabled': False, 'user_analytics_code': '', 'global_analytics_code': 'UA-17997319-2', 'commit': '8690b152', } # For sphinx >=1.8 we can use html_baseurl to set the canonical URL. # https://www.sphinx-doc.org/en/master/usage/configuration.html#confval-html_baseurl if version_info >= (1, 8): if not globals().get('html_baseurl'): html_baseurl = context['canonical_url'] context['canonical_url'] = None if 'html_context' in globals(): html_context.update(context) else: html_context = context # Add custom RTD extension if 'extensions' in globals(): # Insert at the beginning because it can interfere # with other extensions. # See https://github.com/rtfd/readthedocs.org/pull/4054 extensions.insert(0, "readthedocs_ext.readthedocs") else: extensions = ["readthedocs_ext.readthedocs"] # Add External version warning banner to the external version documentation if 'branch' == 'external': extensions.insert(1, "readthedocs_ext.external_version_warning") readthedocs_vcs_url = 'None' readthedocs_build_url = 'https://readthedocs.com/projects/tabella-finland-oy-tabella-manual-eng/builds/828397/' project_language = 'en' # User's Sphinx configurations language_user = globals().get('language', None) latex_engine_user = globals().get('latex_engine', None) latex_elements_user = globals().get('latex_elements', None) # Remove this once xindy gets installed in Docker image and XINDYOPS # env variable is supported # https://github.com/rtfd/readthedocs-docker-images/pull/98 latex_use_xindy = False chinese = any([ language_user in ('zh_CN', 'zh_TW'), project_language in ('zh_CN', 'zh_TW'), ]) japanese = any([ language_user == 'ja', project_language == 'ja', ]) if chinese: latex_engine = latex_engine_user or 'xelatex' latex_elements_rtd = { 'preamble': '\\usepackage[UTF8]{ctex}\n', } latex_elements = latex_elements_user or latex_elements_rtd elif japanese: latex_engine = latex_engine_user or 'platex' # Make sure our build directory is always excluded exclude_patterns = globals().get('exclude_patterns', []) exclude_patterns.extend(['_build']) [rtd-command-info] start-time: 2022-01-20T05:16:50.341955Z, end-time: 2022-01-20T05:17:56.475337Z, duration: 66, exit-code: 2 python -m sphinx -T -E -b html -d _build/doctrees -D language=en . _build/html Running Sphinx v4.2.0 loading translations [en]... done making output directory... done Initiated sphinxcontrib-images backend: `sphinxcontrib_images_lightbox2.lightbox2:LightBox2` building [mo]: targets for 147 po files that are out of date writing output... [ 0%] locale/en/LC_MESSAGES/maintain-other/colormaintenance.mo writing output... [ 1%] locale/en/LC_MESSAGES/maintain-criticalsettings/listofcodeplans.mo writing output... [ 2%] locale/en/LC_MESSAGES/maintain-reportsrun/index.mo writing output... [ 2%] locale/en/LC_MESSAGES/maintain-periods/periodchange.mo writing output... [ 3%] locale/en/LC_MESSAGES/maintain-reports/atoabalance.mo writing output... [ 4%] locale/en/LC_MESSAGES/maintain-reports/rowmodelcolumnmodification.mo writing output... [ 4%] locale/en/LC_MESSAGES/reports/rows.mo writing output... [ 5%] locale/en/LC_MESSAGES/reportbook/index.mo writing output... [ 6%] locale/en/LC_MESSAGES/maintain-reports/percentageofrowcolumn.mo writing output... [ 6%] locale/en/LC_MESSAGES/maintain-periods/versionmanagement.mo writing output... [ 7%] locale/en/LC_MESSAGES/maintain-periods/datamodification.mo writing output... [ 8%] locale/en/LC_MESSAGES/maintain-reports/screencalculations.mo writing output... [ 8%] locale/en/LC_MESSAGES/reports/charts.mo writing output... [ 9%] locale/en/LC_MESSAGES/maintain-other/log.mo writing output... [ 10%] locale/en/LC_MESSAGES/faq/index.mo writing output... [ 10%] locale/en/LC_MESSAGES/maintain-transfer/saldotransfer.mo writing output... [ 11%] locale/en/LC_MESSAGES/introduction/user-interface.mo writing output... [ 12%] locale/en/LC_MESSAGES/reports/tree.mo writing output... [ 12%] locale/en/LC_MESSAGES/reports/grid-functions.mo writing output... [ 13%] locale/en/LC_MESSAGES/maintain-periods/changestoactual.mo writing output... [ 14%] locale/en/LC_MESSAGES/introduction/sso.mo writing output... [ 14%] locale/en/LC_MESSAGES/maintain-periods/createopeningbalance.mo writing output... [ 15%] locale/en/LC_MESSAGES/maintain-criticalsettings/addnewcompany.mo writing output... [ 16%] locale/en/LC_MESSAGES/maintain-criticalsettings/totalsumofcompanies.mo writing output... [ 17%] locale/en/LC_MESSAGES/maintain-other/windowsidonlogin.mo writing output... [ 17%] locale/en/LC_MESSAGES/maintain-reports/structuretransfer.mo writing output... [ 18%] locale/en/LC_MESSAGES/maintain-criticalsettings/dimensionmaintenance.mo writing output... [ 19%] locale/en/LC_MESSAGES/maintain-periods/budfctlrpmaintenance.mo writing output... [ 19%] locale/en/LC_MESSAGES/maintain-reports/index.mo writing output... [ 20%] locale/en/LC_MESSAGES/version/2019.mo writing output... [ 21%] locale/en/LC_MESSAGES/maintain-periods/payrolldatatransferbud.mo writing output... [ 21%] locale/en/LC_MESSAGES/introduction/preferences.mo writing output... [ 22%] locale/en/LC_MESSAGES/maintain-periods/fctbudlrpcreation.mo writing output... [ 23%] locale/en/LC_MESSAGES/maintain-other/reportheadersmonth.mo writing output... [ 23%] locale/en/LC_MESSAGES/maintain-other/adminsettings.mo writing output... [ 24%] locale/en/LC_MESSAGES/maintain-other/shortlongreporttostartentry.mo writing output... [ 25%] locale/en/LC_MESSAGES/maintain-transfer/index.mo writing output... [ 25%] locale/en/LC_MESSAGES/maintain-xbrl/index.mo writing output... [ 26%] locale/en/LC_MESSAGES/maintain-other/workingtime.mo writing output... [ 27%] locale/en/LC_MESSAGES/maintain-transfer/exportfile.mo writing output... [ 27%] locale/en/LC_MESSAGES/maintain-periods/forecast.mo writing output... [ 28%] locale/en/LC_MESSAGES/maintain-reports/balanceccountspecification.mo writing output... [ 29%] locale/en/LC_MESSAGES/reports/bookmark.mo writing output... [ 29%] locale/en/LC_MESSAGES/maintain-other/sumaccountonentry.mo writing output... [ 30%] locale/en/LC_MESSAGES/maintain-criticalsettings/companies.mo writing output... [ 31%] locale/en/LC_MESSAGES/maintain-reports/views.mo writing output... [ 31%] locale/en/LC_MESSAGES/maintain-periods/transferpayrollfct.mo writing output... [ 32%] locale/en/LC_MESSAGES/maintain-periods/actualandcreateopeningbalances.mo writing output... [ 33%] locale/en/LC_MESSAGES/version/index.mo writing output... [ 34%] locale/en/LC_MESSAGES/maintain-reports/atoaexample.mo writing output... [ 34%] locale/en/LC_MESSAGES/maintain-other/systemstatus.mo writing output... [ 35%] locale/en/LC_MESSAGES/maintain-trees/createspecialreports.mo writing output... [ 36%] locale/en/LC_MESSAGES/maintain-other/pricelistmaintenance.mo writing output... [ 36%] locale/en/LC_MESSAGES/maintain-trees/newtreestructurebase.mo writing output... [ 37%] locale/en/LC_MESSAGES/maintain-other/runtime.mo writing output... [ 38%] locale/en/LC_MESSAGES/maintain-transfer/transactionconversiontable.mo writing output... [ 38%] locale/en/LC_MESSAGES/maintain-periods/yearchangechecklist.mo writing output... [ 39%] locale/en/LC_MESSAGES/entry/forms.mo writing output... [ 40%] locale/en/LC_MESSAGES/maintain-reports/columnsmaintenanceother.mo writing output... [ 40%] locale/en/LC_MESSAGES/maintain-reports/viewcolumnmodification.mo writing output... [ 41%] locale/en/LC_MESSAGES/maintain-periods/budget.mo writing output... [ 42%] locale/en/LC_MESSAGES/maintain-periods/lrpyears.mo writing output... [ 42%] locale/en/LC_MESSAGES/maintain-other/employmenttypes.mo writing output... [ 43%] locale/en/LC_MESSAGES/maintain-reports/allocations.mo writing output... [ 44%] locale/en/LC_MESSAGES/maintain-reports/addnewcolumn.mo writing output... [ 44%] locale/en/LC_MESSAGES/maintain-periods/lrp.mo writing output... [ 45%] locale/en/LC_MESSAGES/maintain-transfer/uploadfile.mo writing output... [ 46%] locale/en/LC_MESSAGES/entry/index.mo writing output... [ 46%] locale/en/LC_MESSAGES/maintain-trees/organizationalviews.mo writing output... [ 47%] locale/en/LC_MESSAGES/maintain-reports/chartofaccountsrowmodelmaintenance.mo writing output... [ 48%] locale/en/LC_MESSAGES/maintain-criticalsettings/index.mo writing output... [ 48%] locale/en/LC_MESSAGES/maintain-other/closingactual.mo writing output... [ 49%] locale/en/LC_MESSAGES/maintain-criticalsettings/companymaintenance.mo writing output... [ 50%] locale/en/LC_MESSAGES/other/functionsinerrors.mo writing output... [ 51%] locale/en/LC_MESSAGES/maintain-periods/fctlength.mo writing output... [ 51%] locale/en/LC_MESSAGES/maintain-transfer/others.mo writing output... [ 52%] locale/en/LC_MESSAGES/maintain-xbrl/maintain.mo writing output... [ 53%] locale/en/LC_MESSAGES/reports/tree-functions.mo writing output... [ 53%] locale/en/LC_MESSAGES/maintain-other/investmentcategories.mo writing output... [ 54%] locale/en/LC_MESSAGES/maintain-reports/rowmodelsettings.mo writing output... [ 55%] locale/en/LC_MESSAGES/maintain-reports/atoacalculations.mo writing output... [ 55%] locale/en/LC_MESSAGES/maintain-other/staffcategories.mo writing output... [ 56%] locale/en/LC_MESSAGES/maintain-reports/importallocationtable.mo writing output... [ 57%] locale/en/LC_MESSAGES/maintain-trees/specialreportshead.mo writing output... [ 57%] locale/en/LC_MESSAGES/maintain-transfer/newcodes.mo writing output... [ 58%] locale/en/LC_MESSAGES/maintain-reports/multiplications.mo writing output... [ 59%] locale/en/LC_MESSAGES/maintain-reports/viewtextediting.mo writing output... [ 59%] locale/en/LC_MESSAGES/maintain-periods/entryprocessoverview.mo writing output... [ 60%] locale/en/LC_MESSAGES/reports/group-consolidation.mo writing output... [ 61%] locale/en/LC_MESSAGES/maintain-other/leveleliminationtype.mo writing output... [ 61%] locale/en/LC_MESSAGES/version/2020.mo writing output... [ 62%] locale/en/LC_MESSAGES/reports/index.mo writing output... [ 63%] locale/en/LC_MESSAGES/maintain-other/versioninformation.mo writing output... [ 63%] locale/en/LC_MESSAGES/entry/entry.mo writing output... [ 64%] locale/en/LC_MESSAGES/maintain-users/index.mo writing output... [ 65%] locale/en/LC_MESSAGES/other/accumulateexchange.mo writing output... [ 65%] locale/en/LC_MESSAGES/maintain-other/entryforms.mo writing output... [ 66%] locale/en/LC_MESSAGES/reportbook/maintenance.mo writing output... [ 67%] locale/en/LC_MESSAGES/introduction/settings.mo writing output... [ 68%] locale/en/LC_MESSAGES/maintain-periods/index.mo writing output... [ 68%] locale/en/LC_MESSAGES/entry/pricelist.mo writing output... [ 69%] locale/en/LC_MESSAGES/maintain-reports/addnewcolumnmodel.mo writing output... [ 70%] locale/en/LC_MESSAGES/maintain-periods/savingmainversion.mo writing output... [ 70%] locale/en/LC_MESSAGES/maintain-periods/payrolltransferlrp.mo writing output... [ 71%] locale/en/LC_MESSAGES/reports/others.mo writing output... [ 72%] locale/en/LC_MESSAGES/entry/voucher.mo writing output... [ 72%] locale/en/LC_MESSAGES/api/index.mo writing output... [ 73%] locale/en/LC_MESSAGES/maintain-periods/distributionkeys.mo writing output... [ 74%] locale/en/LC_MESSAGES/introduction/login.mo writing output... [ 74%] locale/en/LC_MESSAGES/maintain-consolidation/index.mo writing output... [ 75%] locale/en/LC_MESSAGES/other/tabella-manual-style-guide.mo writing output... [ 76%] locale/en/LC_MESSAGES/maintain-other/languages.mo writing output... [ 76%] locale/en/LC_MESSAGES/maintain-reports/allocationtablemaintenance.mo writing output... [ 77%] locale/en/LC_MESSAGES/entry/personnel-planning.mo writing output... [ 78%] locale/en/LC_MESSAGES/introduction/index.mo writing output... [ 78%] locale/en/LC_MESSAGES/maintain-reports/atoaprofit.mo writing output... [ 79%] locale/en/LC_MESSAGES/maintain-reports/columns.mo writing output... [ 80%] locale/en/LC_MESSAGES/maintain-periods/activeactualyears.mo writing output... [ 80%] locale/en/LC_MESSAGES/maintain-periods/payrolldatatransfer.mo writing output... [ 81%] locale/en/LC_MESSAGES/maintain-periods/unlockdata.mo writing output... [ 82%] locale/en/LC_MESSAGES/maintain-other/index.mo writing output... [ 82%] locale/en/LC_MESSAGES/maintain-transfer/transactiontransfer.mo writing output... [ 83%] locale/en/LC_MESSAGES/maintain-reports/viewsettings.mo writing output... [ 84%] locale/en/LC_MESSAGES/maintain-trees/dimensiontreestructures.mo writing output... [ 85%] locale/en/LC_MESSAGES/maintain-other/loggederrors.mo writing output... [ 85%] locale/en/LC_MESSAGES/maintain-trees/index.mo writing output... [ 86%] locale/en/LC_MESSAGES/other/privacypolicy.mo writing output... [ 87%] locale/en/LC_MESSAGES/entry/graphic-entry.mo writing output... [ 87%] locale/en/LC_MESSAGES/dashboard/index.mo writing output... [ 88%] locale/en/LC_MESSAGES/maintain-other/rundate.mo writing output... [ 89%] locale/en/LC_MESSAGES/maintain-trees/tree-maintenance.mo writing output... [ 89%] locale/en/LC_MESSAGES/maintain-reports/dynamicalloctable.mo writing output... [ 90%] locale/en/LC_MESSAGES/reports/cols.mo writing output... [ 91%] locale/en/LC_MESSAGES/maintain-other/admingeneralsettings.mo writing output... [ 91%] locale/en/LC_MESSAGES/maintain-reports/createreportmodel.mo writing output... [ 92%] locale/en/LC_MESSAGES/entry/investment-planning.mo writing output... [ 93%] locale/en/LC_MESSAGES/maintain-reports/rollingcolumnsets.mo writing output... [ 93%] locale/en/LC_MESSAGES/index.mo writing output... [ 94%] locale/en/LC_MESSAGES/maintain-other/vouchertypemaintenance.mo writing output... [ 95%] locale/en/LC_MESSAGES/maintain-transfer/log.mo writing output... [ 95%] locale/en/LC_MESSAGES/maintain-other/shorttexts.mo writing output... [ 96%] locale/en/LC_MESSAGES/maintain-trees/salarycompanytreestructure.mo writing output... [ 97%] locale/en/LC_MESSAGES/maintain-periods/activebudyears.mo writing output... [ 97%] locale/en/LC_MESSAGES/maintain-periods/createform.mo writing output... [ 98%] locale/en/LC_MESSAGES/introduction/homepage.mo writing output... [ 99%] locale/en/LC_MESSAGES/reports/buttons.mo writing output... [100%] locale/en/LC_MESSAGES/introduction/content.mo building [html]: targets for 146 source files that are out of date updating environment: [new config] 146 added, 0 changed, 0 removed reading sources... [ 0%] api/index reading sources... [ 1%] dashboard/index reading sources... [ 2%] entry/entry reading sources... [ 2%] entry/forms reading sources... [ 3%] entry/graphic-entry reading sources... [ 4%] entry/index reading sources... [ 4%] entry/investment-planning reading sources... [ 5%] entry/personnel-planning reading sources... [ 6%] entry/pricelist reading sources... [ 6%] entry/voucher reading sources... [ 7%] faq/index reading sources... [ 8%] index reading sources... [ 8%] introduction/content reading sources... [ 9%] introduction/homepage reading sources... [ 10%] introduction/index reading sources... [ 10%] introduction/login reading sources... [ 11%] introduction/preferences reading sources... [ 12%] introduction/settings reading sources... [ 13%] introduction/sso reading sources... [ 13%] introduction/user-interface reading sources... [ 14%] maintain-consolidation/index reading sources... [ 15%] maintain-criticalsettings/addnewcompany reading sources... [ 15%] maintain-criticalsettings/companies reading sources... [ 16%] maintain-criticalsettings/companymaintenance reading sources... [ 17%] maintain-criticalsettings/dimensionmaintenance reading sources... [ 17%] maintain-criticalsettings/index reading sources... [ 18%] maintain-criticalsettings/listofcodeplans reading sources... [ 19%] maintain-criticalsettings/totalsumofcompanies reading sources... [ 19%] maintain-other/admingeneralsettings reading sources... [ 20%] maintain-other/adminsettings reading sources... [ 21%] maintain-other/closingactual reading sources... [ 21%] maintain-other/colormaintenance reading sources... [ 22%] maintain-other/employmenttypes reading sources... [ 23%] maintain-other/entryforms reading sources... [ 23%] maintain-other/index reading sources... [ 24%] maintain-other/investmentcategories reading sources... [ 25%] maintain-other/languages reading sources... [ 26%] maintain-other/leveleliminationtype reading sources... [ 26%] maintain-other/log reading sources... [ 27%] maintain-other/loggederrors reading sources... [ 28%] maintain-other/pricelistmaintenance reading sources... [ 28%] maintain-other/reportheadersmonth reading sources... [ 29%] maintain-other/rundate reading sources... [ 30%] maintain-other/runtime reading sources... [ 30%] maintain-other/shortlongreporttostartentry reading sources... [ 31%] maintain-other/shorttexts reading sources... [ 32%] maintain-other/staffcategories reading sources... [ 32%] maintain-other/sumaccountonentry reading sources... [ 33%] maintain-other/systemstatus reading sources... [ 34%] maintain-other/versioninformation reading sources... [ 34%] maintain-other/vouchertypemaintenance reading sources... [ 35%] maintain-other/workingtime reading sources... [ 36%] maintain-periods/activeactualyears reading sources... [ 36%] maintain-periods/activebudyears reading sources... [ 37%] maintain-periods/actualandcreateopeningbalances reading sources... [ 38%] maintain-periods/budfctlrpmaintenance reading sources... [ 39%] maintain-periods/budget reading sources... [ 39%] maintain-periods/changestoactual reading sources... [ 40%] maintain-periods/createform reading sources... [ 41%] maintain-periods/createopeningbalance reading sources... [ 41%] maintain-periods/datamodification reading sources... [ 42%] maintain-periods/distributionkeys reading sources... [ 43%] maintain-periods/entryprocessoverview reading sources... [ 43%] maintain-periods/fctbudlrpcreation reading sources... [ 44%] maintain-periods/fctlength reading sources... [ 45%] maintain-periods/forecast reading sources... [ 45%] maintain-periods/index reading sources... [ 46%] maintain-periods/lrp reading sources... [ 47%] maintain-periods/lrpyears reading sources... [ 47%] maintain-periods/payrolldatatransfer reading sources... [ 48%] maintain-periods/payrolldatatransferbud reading sources... [ 49%] maintain-periods/payrolltransferlrp reading sources... [ 50%] maintain-periods/periodchange reading sources... [ 50%] maintain-periods/savingmainversion reading sources... [ 51%] maintain-periods/transferpayrollfct reading sources... [ 52%] maintain-periods/unlockdata reading sources... [ 52%] maintain-periods/versionmanagement reading sources... [ 53%] maintain-periods/yearchangechecklist reading sources... [ 54%] maintain-reports/addnewcolumn reading sources... [ 54%] maintain-reports/addnewcolumnmodel reading sources... [ 55%] maintain-reports/allocations reading sources... [ 56%] maintain-reports/allocationtablemaintenance reading sources... [ 56%] maintain-reports/atoabalance reading sources... [ 57%] maintain-reports/atoacalculations reading sources... [ 58%] maintain-reports/atoaexample reading sources... [ 58%] maintain-reports/atoaprofit reading sources... [ 59%] maintain-reports/balanceccountspecification reading sources... [ 60%] maintain-reports/chartofaccountsrowmodelmaintenance reading sources... [ 60%] maintain-reports/columns reading sources... [ 61%] maintain-reports/columnsmaintenanceother reading sources... [ 62%] maintain-reports/createreportmodel reading sources... [ 63%] maintain-reports/dynamicalloctable reading sources... [ 63%] maintain-reports/importallocationtable reading sources... [ 64%] maintain-reports/index reading sources... [ 65%] maintain-reports/multiplications reading sources... [ 65%] maintain-reports/percentageofrowcolumn reading sources... [ 66%] maintain-reports/rollingcolumnsets reading sources... [ 67%] maintain-reports/rowmodelcolumnmodification reading sources... [ 67%] maintain-reports/rowmodelsettings reading sources... [ 68%] maintain-reports/screencalculations reading sources... [ 69%] maintain-reports/structuretransfer reading sources... [ 69%] maintain-reports/viewcolumnmodification reading sources... [ 70%] maintain-reports/views reading sources... [ 71%] maintain-reports/viewsettings reading sources... [ 71%] maintain-reports/viewtextediting reading sources... [ 72%] maintain-reportsrun/index reading sources... [ 73%] maintain-transfer/exportfile reading sources... [ 73%] maintain-transfer/index reading sources... [ 74%] maintain-transfer/log reading sources... [ 75%] maintain-transfer/newcodes reading sources... [ 76%] maintain-transfer/others reading sources... [ 76%] maintain-transfer/saldotransfer reading sources... [ 77%] maintain-transfer/transactionconversiontable reading sources... [ 78%] maintain-transfer/transactiontransfer reading sources... [ 78%] maintain-transfer/uploadfile reading sources... [ 79%] maintain-trees/createspecialreports reading sources... [ 80%] maintain-trees/dimensiontreestructures reading sources... [ 80%] maintain-trees/index reading sources... [ 81%] maintain-trees/newtreestructurebase /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/checkouts/latest/maintain-consolidation/index.rst:500: WARNING: Inline emphasis start-string without end-string. /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/checkouts/latest/maintain-other/leveleliminationtype.rst:5: WARNING: Unknown target name: "e". /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/checkouts/latest/maintain-other/leveleliminationtype.rst:5: WARNING: Unknown target name: "e". /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/checkouts/latest/maintain-other/leveleliminationtype.rst:9: WARNING: Unknown target name: "e". /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/checkouts/latest/maintain-other/leveleliminationtype.rst:11: WARNING: Unknown target name: "e". /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/checkouts/latest/maintain-other/leveleliminationtype.rst:11: WARNING: Unknown target name: "e". /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/checkouts/latest/maintain-periods/fctbudlrpcreation.rst:79: WARNING: Inline emphasis start-string without end-string. /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/checkouts/latest/maintain-reports/addnewcolumn.rst:44: WARNING: Inline strong start-string without end-string. /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/checkouts/latest/maintain-reports/addnewcolumn.rst:44::1: WARNING: Inline strong start-string without end-string. /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/checkouts/latest/maintain-reports/addnewcolumn.rst:44::1: WARNING: Inline strong start-string without end-string. /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/checkouts/latest/maintain-reports/createreportmodel.rst:114: WARNING: Inline emphasis start-string without end-string. /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/checkouts/latest/maintain-reports/screencalculations.rst:52: WARNING: Inline emphasis start-string without end-string. /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/checkouts/latest/maintain-reportsrun/index.rst:7: WARNING: Block quote ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/checkouts/latest/maintain-transfer/transactionconversiontable.rst:32: WARNING: Bullet list ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/checkouts/latest/maintain-transfer/transactionconversiontable.rst:35: WARNING: Bullet list ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/checkouts/latest/maintain-transfer/transactionconversiontable.rst:38: WARNING: Bullet list ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/checkouts/latest/maintain-trees/newtreestructurebase.rst:100: WARNING: Bullet list ends without a blank line; unexpected unindent. /home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/checkouts/latest/maintain-trees/newtreestructurebase.rst:103: WARNING: Bullet list ends without a blank line; unexpected unindent. Traceback (most recent call last): File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/sphinx/cmd/build.py", line 280, in build_main app.build(args.force_all, filenames) File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/sphinx/application.py", line 343, in build self.builder.build_update() File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/sphinx/builders/__init__.py", line 293, in build_update self.build(to_build, File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/sphinx/builders/__init__.py", line 307, in build updated_docnames = set(self.read()) File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/sphinx/builders/__init__.py", line 414, in read self._read_serial(docnames) File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/sphinx/builders/__init__.py", line 435, in _read_serial self.read_doc(docname) File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/sphinx/builders/__init__.py", line 475, in read_doc doctree = read_doc(self.app, self.env, self.env.doc2path(docname)) File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/sphinx/io.py", line 189, in read_doc pub.publish() File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/docutils/core.py", line 217, in publish self.document = self.reader.read(self.source, self.parser, File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/sphinx/io.py", line 109, in read self.parse() File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/docutils/readers/__init__.py", line 77, in parse self.parser.parse(self.input, document) File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/sphinx/parsers.py", line 101, in parse self.statemachine.run(inputlines, document, inliner=self.inliner) File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/docutils/parsers/rst/states.py", line 170, in run results = StateMachineWS.run(self, input_lines, input_offset, File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/docutils/statemachine.py", line 241, in run context, next_state, result = self.check_line( File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/docutils/statemachine.py", line 459, in check_line return method(match, context, next_state) File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/docutils/parsers/rst/states.py", line 3005, in text self.section(title.lstrip(), source, style, lineno + 1, messages) File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/docutils/parsers/rst/states.py", line 327, in section self.new_subsection(title, lineno, messages) File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/docutils/parsers/rst/states.py", line 393, in new_subsection newabsoffset = self.nested_parse( File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/docutils/parsers/rst/states.py", line 281, in nested_parse state_machine.run(block, input_offset, memo=self.memo, File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/docutils/parsers/rst/states.py", line 196, in run results = StateMachineWS.run(self, input_lines, input_offset) File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/docutils/statemachine.py", line 241, in run context, next_state, result = self.check_line( File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/docutils/statemachine.py", line 459, in check_line return method(match, context, next_state) File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/docutils/parsers/rst/states.py", line 3005, in text self.section(title.lstrip(), source, style, lineno + 1, messages) File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/docutils/parsers/rst/states.py", line 327, in section self.new_subsection(title, lineno, messages) File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/docutils/parsers/rst/states.py", line 393, in new_subsection newabsoffset = self.nested_parse( File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/docutils/parsers/rst/states.py", line 281, in nested_parse state_machine.run(block, input_offset, memo=self.memo, File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/docutils/parsers/rst/states.py", line 196, in run results = StateMachineWS.run(self, input_lines, input_offset) File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/docutils/statemachine.py", line 241, in run context, next_state, result = self.check_line( File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/docutils/statemachine.py", line 459, in check_line return method(match, context, next_state) File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/docutils/parsers/rst/states.py", line 2769, in underline self.section(title, source, style, lineno - 1, messages) File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/docutils/parsers/rst/states.py", line 327, in section self.new_subsection(title, lineno, messages) File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/docutils/parsers/rst/states.py", line 393, in new_subsection newabsoffset = self.nested_parse( File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/docutils/parsers/rst/states.py", line 281, in nested_parse state_machine.run(block, input_offset, memo=self.memo, File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/docutils/parsers/rst/states.py", line 196, in run results = StateMachineWS.run(self, input_lines, input_offset) File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/docutils/statemachine.py", line 241, in run context, next_state, result = self.check_line( File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/docutils/statemachine.py", line 459, in check_line return method(match, context, next_state) File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/docutils/parsers/rst/states.py", line 2342, in explicit_markup nodelist, blank_finish = self.explicit_construct(match) File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/docutils/parsers/rst/states.py", line 2354, in explicit_construct return method(self, expmatch) File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/docutils/parsers/rst/states.py", line 2096, in directive return self.run_directive( File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/docutils/parsers/rst/states.py", line 2146, in run_directive result = directive_instance.run() File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/sphinxcontrib/images.py", line 157, in run if self.is_remote(self.arguments[0]): File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/sphinxcontrib/images.py", line 208, in is_remote raise ValueError('Image URI `{}` have to be local relative or ' ValueError: Image URI `../.static/AddNewTreePic6b.png` have to be local relative or absolute path to image, or remote address. Exception occurred: File "/home/docs/checkouts/readthedocs.org/user_builds/tabella-finland-oy-tabella-manual-eng/envs/latest/lib/python3.8/site-packages/sphinxcontrib/images.py", line 208, in is_remote raise ValueError('Image URI `{}` have to be local relative or ' ValueError: Image URI `../.static/AddNewTreePic6b.png` have to be local relative or absolute path to image, or remote address. The full traceback has been saved in /tmp/sphinx-err-6ydxv3rd.log, if you want to report the issue to the developers. Please also report this if it was a user error, so that a better error message can be provided next time. A bug report can be filed in the tracker at . Thanks!