Read the Docs build information Build id: 1590561 Project: continuumio-conda Version: latest Commit: 23700a707b515ac2a9c39dae218d7f602ecf1d9a Date: 2023-07-11T09:44:59.885238Z State: cancelled Success: False [rtd-command-info] start-time: 2023-07-11T09:45:06.437826Z, end-time: 2023-07-11T09:45:13.236777Z, duration: 6, exit-code: 0 git clone --no-single-branch --depth 50 https://github.com/conda/conda . Cloning into '.'... [rtd-command-info] start-time: 2023-07-11T09:45:13.607486Z, end-time: 2023-07-11T09:45:14.085620Z, duration: 0, exit-code: 0 git checkout --force origin/main Note: switching to 'origin/main'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 23700a707 Use `os.environ["GITHUB_ENV"]` instead of `${{ env.GITHUB_ENV }}` (#12861) [rtd-command-info] start-time: 2023-07-11T09:45:14.613291Z, end-time: 2023-07-11T09:45:14.698195Z, duration: 0, exit-code: 0 git clean -d -f -f [rtd-command-info] start-time: 2023-07-11T09:45:15.098942Z, end-time: 2023-07-11T09:45:15.163006Z, duration: 0, exit-code: 0 cat .readthedocs.yml version: 2 # Set the version of Python and other tools you might need build: os: ubuntu-22.04 tools: python: "3.10" jobs: post_checkout: # Unshallow the git clone to make sure we can identify the version - git fetch --unshallow pre_install: - git update-index --assume-unchanged docs/requirements.txt docs/source/conf.py pre_build: # Install conda so we can run conda commands (e.g., see configuration.rst) - python -m pip install --no-deps --no-cache-dir --editable . apt_packages: # Needed for the UML graph Sphinx extension - graphviz - default-jre python: install: - requirements: docs/requirements.txt [rtd-command-info] start-time: 2023-07-11T09:45:15.542949Z, end-time: 2023-07-11T09:45:20.232111Z, duration: 4, exit-code: 0 git fetch --unshallow [rtd-command-info] start-time: 2023-07-11T09:45:23.654745Z, end-time: 2023-07-11T09:45:29.893795Z, duration: 6, exit-code: 0 apt-get update --assume-yes --quiet Get:1 http://security.ubuntu.com/ubuntu jammy-security InRelease [110 kB] Hit:2 http://archive.ubuntu.com/ubuntu jammy InRelease Get:3 http://archive.ubuntu.com/ubuntu jammy-updates InRelease [119 kB] Get:4 http://archive.ubuntu.com/ubuntu jammy-backports InRelease [108 kB] Get:5 http://security.ubuntu.com/ubuntu jammy-security/restricted amd64 Packages [693 kB] Get:6 http://archive.ubuntu.com/ubuntu jammy-updates/restricted amd64 Packages [703 kB] Get:7 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 Packages [991 kB] Get:8 http://security.ubuntu.com/ubuntu jammy-security/main amd64 Packages [708 kB] Get:9 http://security.ubuntu.com/ubuntu jammy-security/universe amd64 Packages [949 kB] Get:10 http://archive.ubuntu.com/ubuntu jammy-updates/multiverse amd64 Packages [59.4 kB] Get:11 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages [1205 kB] Get:12 http://archive.ubuntu.com/ubuntu jammy-backports/universe amd64 Packages [25.5 kB] Get:13 http://archive.ubuntu.com/ubuntu jammy-backports/main amd64 Packages [49.4 kB] Get:14 http://security.ubuntu.com/ubuntu jammy-security/multiverse amd64 Packages [53.6 kB] Fetched 5773 kB in 1s (4739 kB/s) Reading package lists... [rtd-command-info] start-time: 2023-07-11T09:45:31.219645Z, end-time: 2023-07-11T09:46:03.113632Z, duration: 31, exit-code: 0 apt-get install --assume-yes --quiet -- graphviz default-jre Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: alsa-topology-conf alsa-ucm-conf ca-certificates-java default-jre-headless fonts-liberation java-common libann0 libasound2 libasound2-data libatk-wrapper-java libatk-wrapper-java-jni libgif7 libpcsclite1 openjdk-11-jre openjdk-11-jre-headless Suggested packages: graphviz-doc libasound2-plugins alsa-utils pcscd libnss-mdns fonts-wqy-microhei | fonts-wqy-zenhei fonts-indic The following NEW packages will be installed: alsa-topology-conf alsa-ucm-conf ca-certificates-java default-jre default-jre-headless fonts-liberation graphviz java-common libann0 libasound2 libasound2-data libatk-wrapper-java libatk-wrapper-java-jni libgif7 libpcsclite1 openjdk-11-jre openjdk-11-jre-headless 0 upgraded, 17 newly installed, 0 to remove and 143 not upgraded. Need to get 44.8 MB of archives. After this operation, 184 MB of additional disk space will be used. Get:1 http://archive.ubuntu.com/ubuntu jammy/main amd64 alsa-topology-conf all 1.2.5.1-2 [15.5 kB] Get:2 http://archive.ubuntu.com/ubuntu jammy/main amd64 libasound2-data all 1.2.6.1-1ubuntu1 [19.1 kB] Get:3 http://archive.ubuntu.com/ubuntu jammy/main amd64 libasound2 amd64 1.2.6.1-1ubuntu1 [390 kB] Get:4 http://archive.ubuntu.com/ubuntu jammy/main amd64 alsa-ucm-conf all 1.2.6.3-1ubuntu1 [41.0 kB] Get:5 http://archive.ubuntu.com/ubuntu jammy/main amd64 java-common all 0.72build2 [6782 B] Get:6 http://archive.ubuntu.com/ubuntu jammy/main amd64 libpcsclite1 amd64 1.9.5-3 [19.9 kB] Get:7 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 openjdk-11-jre-headless amd64 11.0.19+7~us1-0ubuntu1~22.04.1 [42.5 MB] Get:8 http://archive.ubuntu.com/ubuntu jammy/main amd64 default-jre-headless amd64 2:1.11-72build2 [3042 B] Get:9 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 ca-certificates-java all 20190909ubuntu1.2 [12.1 kB] Get:10 http://archive.ubuntu.com/ubuntu jammy/main amd64 libgif7 amd64 5.1.9-2build2 [33.8 kB] Get:11 http://archive.ubuntu.com/ubuntu jammy-updates/main amd64 openjdk-11-jre amd64 11.0.19+7~us1-0ubuntu1~22.04.1 [213 kB] Get:12 http://archive.ubuntu.com/ubuntu jammy/main amd64 default-jre amd64 2:1.11-72build2 [896 B] Get:13 http://archive.ubuntu.com/ubuntu jammy/main amd64 fonts-liberation all 1:1.07.4-11 [822 kB] Get:14 http://archive.ubuntu.com/ubuntu jammy/universe amd64 libann0 amd64 1.1.2+doc-7build1 [26.0 kB] Get:15 http://archive.ubuntu.com/ubuntu jammy/universe amd64 graphviz amd64 2.42.2-6 [650 kB] Get:16 http://archive.ubuntu.com/ubuntu jammy/main amd64 libatk-wrapper-java all 0.38.0-5build1 [53.1 kB] Get:17 http://archive.ubuntu.com/ubuntu jammy/main amd64 libatk-wrapper-java-jni amd64 0.38.0-5build1 [49.0 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 44.8 MB in 6s (7757 kB/s) Selecting previously unselected package alsa-topology-conf. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 271716 files and directories currently installed.) Preparing to unpack .../00-alsa-topology-conf_1.2.5.1-2_all.deb ... Unpacking alsa-topology-conf (1.2.5.1-2) ... Selecting previously unselected package libasound2-data. Preparing to unpack .../01-libasound2-data_1.2.6.1-1ubuntu1_all.deb ... Unpacking libasound2-data (1.2.6.1-1ubuntu1) ... Selecting previously unselected package libasound2:amd64. Preparing to unpack .../02-libasound2_1.2.6.1-1ubuntu1_amd64.deb ... Unpacking libasound2:amd64 (1.2.6.1-1ubuntu1) ... Selecting previously unselected package alsa-ucm-conf. Preparing to unpack .../03-alsa-ucm-conf_1.2.6.3-1ubuntu1_all.deb ... Unpacking alsa-ucm-conf (1.2.6.3-1ubuntu1) ... Selecting previously unselected package java-common. Preparing to unpack .../04-java-common_0.72build2_all.deb ... Unpacking java-common (0.72build2) ... Selecting previously unselected package libpcsclite1:amd64. Preparing to unpack .../05-libpcsclite1_1.9.5-3_amd64.deb ... Unpacking libpcsclite1:amd64 (1.9.5-3) ... Selecting previously unselected package openjdk-11-jre-headless:amd64. Preparing to unpack .../06-openjdk-11-jre-headless_11.0.19+7~us1-0ubuntu1~22.04.1_amd64.deb ... Unpacking openjdk-11-jre-headless:amd64 (11.0.19+7~us1-0ubuntu1~22.04.1) ... Selecting previously unselected package default-jre-headless. Preparing to unpack .../07-default-jre-headless_2%3a1.11-72build2_amd64.deb ... Unpacking default-jre-headless (2:1.11-72build2) ... Selecting previously unselected package ca-certificates-java. Preparing to unpack .../08-ca-certificates-java_20190909ubuntu1.2_all.deb ... Unpacking ca-certificates-java (20190909ubuntu1.2) ... Selecting previously unselected package libgif7:amd64. Preparing to unpack .../09-libgif7_5.1.9-2build2_amd64.deb ... Unpacking libgif7:amd64 (5.1.9-2build2) ... Selecting previously unselected package openjdk-11-jre:amd64. Preparing to unpack .../10-openjdk-11-jre_11.0.19+7~us1-0ubuntu1~22.04.1_amd64.deb ... Unpacking openjdk-11-jre:amd64 (11.0.19+7~us1-0ubuntu1~22.04.1) ... Selecting previously unselected package default-jre. Preparing to unpack .../11-default-jre_2%3a1.11-72build2_amd64.deb ... Unpacking default-jre (2:1.11-72build2) ... Selecting previously unselected package fonts-liberation. Preparing to unpack .../12-fonts-liberation_1%3a1.07.4-11_all.deb ... Unpacking fonts-liberation (1:1.07.4-11) ... Selecting previously unselected package libann0. Preparing to unpack .../13-libann0_1.1.2+doc-7build1_amd64.deb ... Unpacking libann0 (1.1.2+doc-7build1) ... Selecting previously unselected package graphviz. Preparing to unpack .../14-graphviz_2.42.2-6_amd64.deb ... Unpacking graphviz (2.42.2-6) ... Selecting previously unselected package libatk-wrapper-java. Preparing to unpack .../15-libatk-wrapper-java_0.38.0-5build1_all.deb ... Unpacking libatk-wrapper-java (0.38.0-5build1) ... Selecting previously unselected package libatk-wrapper-java-jni:amd64. Preparing to unpack .../16-libatk-wrapper-java-jni_0.38.0-5build1_amd64.deb ... Unpacking libatk-wrapper-java-jni:amd64 (0.38.0-5build1) ... Setting up java-common (0.72build2) ... Setting up libasound2-data (1.2.6.1-1ubuntu1) ... Setting up libann0 (1.1.2+doc-7build1) ... Setting up libpcsclite1:amd64 (1.9.5-3) ... Setting up libgif7:amd64 (5.1.9-2build2) ... Setting up alsa-topology-conf (1.2.5.1-2) ... Setting up libasound2:amd64 (1.2.6.1-1ubuntu1) ... Setting up fonts-liberation (1:1.07.4-11) ... Setting up libatk-wrapper-java (0.38.0-5build1) ... Setting up graphviz (2.42.2-6) ... Setting up alsa-ucm-conf (1.2.6.3-1ubuntu1) ... Setting up libatk-wrapper-java-jni:amd64 (0.38.0-5build1) ... Setting up default-jre-headless (2:1.11-72build2) ... Setting up openjdk-11-jre-headless:amd64 (11.0.19+7~us1-0ubuntu1~22.04.1) ... update-alternatives: using /usr/lib/jvm/java-11-openjdk-amd64/bin/java to provide /usr/bin/java (java) in auto mode update-alternatives: using /usr/lib/jvm/java-11-openjdk-amd64/bin/jjs to provide /usr/bin/jjs (jjs) in auto mode update-alternatives: using /usr/lib/jvm/java-11-openjdk-amd64/bin/keytool to provide /usr/bin/keytool (keytool) in auto mode update-alternatives: using /usr/lib/jvm/java-11-openjdk-amd64/bin/rmid to provide /usr/bin/rmid (rmid) in auto mode update-alternatives: using /usr/lib/jvm/java-11-openjdk-amd64/bin/rmiregistry to provide /usr/bin/rmiregistry (rmiregistry) in auto mode update-alternatives: using /usr/lib/jvm/java-11-openjdk-amd64/bin/pack200 to provide /usr/bin/pack200 (pack200) in auto mode update-alternatives: using /usr/lib/jvm/java-11-openjdk-amd64/bin/unpack200 to provide /usr/bin/unpack200 (unpack200) in auto mode update-alternatives: using /usr/lib/jvm/java-11-openjdk-amd64/lib/jexec to provide /usr/bin/jexec (jexec) in auto mode Setting up openjdk-11-jre:amd64 (11.0.19+7~us1-0ubuntu1~22.04.1) ... Setting up default-jre (2:1.11-72build2) ... Setting up ca-certificates-java (20190909ubuntu1.2) ... head: cannot open '/etc/ssl/certs/java/cacerts' for reading: No such file or directory Adding debian:Microsoft_RSA_Root_Certificate_Authority_2017.pem Adding debian:Trustwave_Global_ECC_P384_Certification_Authority.pem Adding debian:NAVER_Global_Root_Certification_Authority.pem Adding debian:Starfield_Root_Certificate_Authority_-_G2.pem Adding debian:emSign_ECC_Root_CA_-_C3.pem Adding debian:Baltimore_CyberTrust_Root.pem Adding debian:TUBITAK_Kamu_SM_SSL_Kok_Sertifikasi_-_Surum_1.pem Adding debian:Hongkong_Post_Root_CA_3.pem Adding debian:Amazon_Root_CA_2.pem Adding debian:ANF_Secure_Server_Root_CA.pem Adding debian:SSL.com_EV_Root_Certification_Authority_RSA_R2.pem Adding debian:AC_RAIZ_FNMT-RCM_SERVIDORES_SEGUROS.pem Adding debian:Trustwave_Global_ECC_P256_Certification_Authority.pem Adding debian:DigiCert_Assured_ID_Root_G2.pem Adding debian:GlobalSign_Root_CA_-_R2.pem Adding debian:GTS_Root_R3.pem Adding debian:Atos_TrustedRoot_2011.pem Adding debian:GlobalSign_ECC_Root_CA_-_R5.pem Adding debian:Amazon_Root_CA_3.pem Adding debian:Go_Daddy_Root_Certificate_Authority_-_G2.pem Adding debian:Certum_Trusted_Root_CA.pem Adding debian:DigiCert_Global_Root_CA.pem Adding debian:SwissSign_Silver_CA_-_G2.pem Adding debian:Go_Daddy_Class_2_CA.pem Adding debian:GDCA_TrustAUTH_R5_ROOT.pem Adding debian:Security_Communication_Root_CA.pem Adding debian:Buypass_Class_3_Root_CA.pem Adding debian:Entrust.net_Premium_2048_Secure_Server_CA.pem Adding debian:TeliaSonera_Root_CA_v1.pem Adding debian:ePKI_Root_Certification_Authority.pem Adding debian:DigiCert_Assured_ID_Root_G3.pem Adding debian:certSIGN_Root_CA_G2.pem Adding debian:Certum_EC-384_CA.pem Adding debian:Hellenic_Academic_and_Research_Institutions_ECC_RootCA_2015.pem Adding debian:OISTE_WISeKey_Global_Root_GC_CA.pem Adding debian:emSign_Root_CA_-_G1.pem Adding debian:ACCVRAIZ1.pem Adding debian:Network_Solutions_Certificate_Authority.pem Adding debian:Entrust_Root_Certification_Authority.pem Adding debian:IdenTrust_Public_Sector_Root_CA_1.pem Adding debian:emSign_ECC_Root_CA_-_G3.pem Adding debian:OISTE_WISeKey_Global_Root_GB_CA.pem Adding debian:ISRG_Root_X1.pem Adding debian:Autoridad_de_Certificacion_Firmaprofesional_CIF_A62634068.pem Adding debian:Certigna.pem Adding debian:USERTrust_RSA_Certification_Authority.pem Adding debian:D-TRUST_Root_Class_3_CA_2_2009.pem Adding debian:Entrust_Root_Certification_Authority_-_G2.pem Adding debian:SSL.com_Root_Certification_Authority_RSA.pem Adding debian:Comodo_AAA_Services_root.pem Adding debian:USERTrust_ECC_Certification_Authority.pem Adding debian:QuoVadis_Root_CA_1_G3.pem Adding debian:Cybertrust_Global_Root.pem Adding debian:Actalis_Authentication_Root_CA.pem Adding debian:QuoVadis_Root_CA_3_G3.pem Adding debian:DigiCert_Trusted_Root_G4.pem Adding debian:Security_Communication_RootCA2.pem Adding debian:D-TRUST_Root_Class_3_CA_2_EV_2009.pem Adding debian:DigiCert_Global_Root_G2.pem Adding debian:NetLock_Arany_=Class_Gold=_Főtanúsítvány.pem Adding debian:Amazon_Root_CA_4.pem Adding debian:Starfield_Services_Root_Certificate_Authority_-_G2.pem Adding debian:Secure_Global_CA.pem Adding debian:AffirmTrust_Networking.pem Adding debian:COMODO_RSA_Certification_Authority.pem Adding debian:GlobalSign_Root_CA.pem Adding debian:Microsoft_ECC_Root_Certificate_Authority_2017.pem Adding debian:GTS_Root_R4.pem Adding debian:COMODO_Certification_Authority.pem Adding debian:Microsec_e-Szigno_Root_CA_2009.pem Adding debian:Buypass_Class_2_Root_CA.pem Adding debian:COMODO_ECC_Certification_Authority.pem Adding debian:T-TeleSec_GlobalRoot_Class_2.pem Adding debian:QuoVadis_Root_CA_3.pem Adding debian:emSign_Root_CA_-_C1.pem Adding debian:EC-ACC.pem Adding debian:QuoVadis_Root_CA_2.pem Adding debian:CFCA_EV_ROOT.pem Adding debian:Certigna_Root_CA.pem Adding debian:AffirmTrust_Premium.pem Adding debian:UCA_Global_G2_Root.pem Adding debian:SecureSign_RootCA11.pem Adding debian:Staat_der_Nederlanden_EV_Root_CA.pem Adding debian:TWCA_Root_Certification_Authority.pem Adding debian:AffirmTrust_Commercial.pem Adding debian:T-TeleSec_GlobalRoot_Class_3.pem Adding debian:GlobalSign_Root_CA_-_R6.pem Adding debian:SZAFIR_ROOT_CA2.pem Adding debian:XRamp_Global_CA_Root.pem Adding debian:CA_Disig_Root_R2.pem Adding debian:Starfield_Class_2_CA.pem Adding debian:GLOBALTRUST_2020.pem Adding debian:GTS_Root_R1.pem Adding debian:Hellenic_Academic_and_Research_Institutions_RootCA_2015.pem Adding debian:SSL.com_Root_Certification_Authority_ECC.pem Adding debian:AffirmTrust_Premium_ECC.pem Adding debian:E-Tugra_Certification_Authority.pem Adding debian:TWCA_Global_Root_CA.pem Adding debian:SSL.com_EV_Root_Certification_Authority_ECC.pem Adding debian:Entrust_Root_Certification_Authority_-_G4.pem Adding debian:Amazon_Root_CA_1.pem Adding debian:GlobalSign_ECC_Root_CA_-_R4.pem Adding debian:GTS_Root_R2.pem Adding debian:GlobalSign_Root_R46.pem Adding debian:DigiCert_Global_Root_G3.pem Adding debian:AC_RAIZ_FNMT-RCM.pem Adding debian:GlobalSign_Root_E46.pem Adding debian:SecureTrust_CA.pem Adding debian:Izenpe.com.pem Adding debian:e-Szigno_Root_CA_2017.pem Adding debian:DigiCert_Assured_ID_Root_CA.pem Adding debian:certSIGN_ROOT_CA.pem Adding debian:Entrust_Root_Certification_Authority_-_EC1.pem Adding debian:Hongkong_Post_Root_CA_1.pem Adding debian:IdenTrust_Commercial_Root_CA_1.pem Adding debian:Certum_Trusted_Network_CA.pem Adding debian:Hellenic_Academic_and_Research_Institutions_RootCA_2011.pem Adding debian:QuoVadis_Root_CA_2_G3.pem Adding debian:Certum_Trusted_Network_CA_2.pem Adding debian:UCA_Extended_Validation_Root.pem Adding debian:DigiCert_High_Assurance_EV_Root_CA.pem Adding debian:SwissSign_Gold_CA_-_G2.pem Adding debian:Trustwave_Global_Certification_Authority.pem Adding debian:GlobalSign_Root_CA_-_R3.pem done. Processing triggers for fontconfig (2.13.1-4.2ubuntu5) ... Processing triggers for hicolor-icon-theme (0.17-2) ... Processing triggers for libc-bin (2.35-0ubuntu3) ... Processing triggers for ca-certificates (20211016ubuntu0.22.04.1) ... Updating certificates in /etc/ssl/certs... 0 added, 0 removed; done. Running hooks in /etc/ca-certificates/update.d... done. done. [rtd-command-info] start-time: 2023-07-11T09:46:07.649949Z, end-time: 2023-07-11T09:46:07.739063Z, duration: 0, exit-code: 0 asdf global python 3.10.12 [rtd-command-info] start-time: 2023-07-11T09:46:08.715964Z, end-time: 2023-07-11T09:46:09.711854Z, duration: 0, exit-code: 0 python -mvirtualenv $READTHEDOCS_VIRTUALENV_PATH created virtual environment CPython3.10.12.final.0-64 in 665ms creator CPython3Posix(dest=/home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda/envs/latest, clear=False, no_vcs_ignore=False, global=False) seeder FromAppData(download=False, pip=bundle, setuptools=bundle, wheel=bundle, via=copy, app_data_dir=/home/docs/.local/share/virtualenv) added seed packages: pip==21.2.3, setuptools==57.4.0, wheel==0.37.0 activators BashActivator,CShellActivator,FishActivator,PowerShellActivator,PythonActivator [rtd-command-info] start-time: 2023-07-11T09:46:10.571676Z, end-time: 2023-07-11T09:46:10.754484Z, duration: 0, exit-code: 0 git update-index --assume-unchanged docs/requirements.txt docs/source/conf.py [rtd-command-info] start-time: 2023-07-11T09:46:11.162048Z, end-time: 2023-07-11T09:46:20.706025Z, duration: 9, exit-code: 0 python -m pip install --upgrade --no-cache-dir pip setuptools Requirement already satisfied: pip in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda/envs/latest/lib/python3.10/site-packages (21.2.3) Collecting pip Downloading pip-23.1.2-py3-none-any.whl (2.1 MB) Requirement already satisfied: setuptools in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda/envs/latest/lib/python3.10/site-packages (57.4.0) Collecting setuptools Downloading setuptools-68.0.0-py3-none-any.whl (804 kB) Installing collected packages: setuptools, pip Attempting uninstall: setuptools Found existing installation: setuptools 57.4.0 Uninstalling setuptools-57.4.0: Successfully uninstalled setuptools-57.4.0 Attempting uninstall: pip Found existing installation: pip 21.2.3 Uninstalling pip-21.2.3: Successfully uninstalled pip-21.2.3 Successfully installed pip-23.1.2 setuptools-68.0.0 [rtd-command-info] start-time: 2023-07-11T09:46:21.075683Z, end-time: 2023-07-11T09:46:28.586165Z, duration: 7, exit-code: 0 python -m pip install --upgrade --no-cache-dir pillow mock==1.0.1 alabaster>=0.7,<0.8,!=0.7.5 commonmark==0.9.1 recommonmark==0.5.0 sphinx<2 sphinx-rtd-theme<0.5 readthedocs-sphinx-ext<2.3 jinja2<3.1.0 Collecting pillow Downloading Pillow-10.0.0-cp310-cp310-manylinux_2_28_x86_64.whl (3.4 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.4/3.4 MB 14.0 MB/s eta 0:00:00 Collecting mock==1.0.1 Downloading mock-1.0.1.zip (861 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 861.9/861.9 kB 35.8 MB/s eta 0:00:00 Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting alabaster!=0.7.5,<0.8,>=0.7 Downloading alabaster-0.7.13-py3-none-any.whl (13 kB) Collecting commonmark==0.9.1 Downloading commonmark-0.9.1-py2.py3-none-any.whl (51 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 51.1/51.1 kB 223.6 MB/s eta 0:00:00 Collecting recommonmark==0.5.0 Downloading recommonmark-0.5.0-py2.py3-none-any.whl (9.8 kB) Collecting sphinx<2 Downloading Sphinx-1.8.6-py2.py3-none-any.whl (3.1 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.1/3.1 MB 45.7 MB/s eta 0:00:00 Collecting sphinx-rtd-theme<0.5 Downloading sphinx_rtd_theme-0.4.3-py2.py3-none-any.whl (6.4 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 6.4/6.4 MB 78.8 MB/s eta 0:00:00 Collecting readthedocs-sphinx-ext<2.3 Downloading readthedocs_sphinx_ext-2.2.2-py2.py3-none-any.whl (11 kB) Collecting jinja2<3.1.0 Downloading Jinja2-3.0.3-py3-none-any.whl (133 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 133.6/133.6 kB 269.8 MB/s eta 0:00:00 Collecting docutils>=0.11 (from recommonmark==0.5.0) Downloading docutils-0.20.1-py3-none-any.whl (572 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 572.7/572.7 kB 237.4 MB/s eta 0:00:00 Collecting six>=1.5 (from sphinx<2) Downloading six-1.16.0-py2.py3-none-any.whl (11 kB) Collecting Pygments>=2.0 (from sphinx<2) Downloading Pygments-2.15.1-py3-none-any.whl (1.1 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.1/1.1 MB 138.2 MB/s eta 0:00:00 Collecting docutils>=0.11 (from recommonmark==0.5.0) Downloading docutils-0.17.1-py2.py3-none-any.whl (575 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 575.5/575.5 kB 215.1 MB/s eta 0:00:00 Collecting snowballstemmer>=1.1 (from sphinx<2) Downloading snowballstemmer-2.2.0-py2.py3-none-any.whl (93 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 93.0/93.0 kB 264.6 MB/s eta 0:00:00 Collecting babel!=2.0,>=1.3 (from sphinx<2) Downloading Babel-2.12.1-py3-none-any.whl (10.1 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 10.1/10.1 MB 147.5 MB/s eta 0:00:00 Collecting imagesize (from sphinx<2) Downloading imagesize-1.4.1-py2.py3-none-any.whl (8.8 kB) Collecting requests>=2.0.0 (from sphinx<2) Downloading requests-2.31.0-py3-none-any.whl (62 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 62.6/62.6 kB 245.8 MB/s eta 0:00:00 Requirement already satisfied: setuptools in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda/envs/latest/lib/python3.10/site-packages (from sphinx<2) (68.0.0) Collecting packaging (from sphinx<2) Downloading packaging-23.1-py3-none-any.whl (48 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 48.9/48.9 kB 241.2 MB/s eta 0:00:00 Collecting sphinxcontrib-websupport (from sphinx<2) Downloading sphinxcontrib_websupport-1.2.4-py2.py3-none-any.whl (39 kB) Collecting MarkupSafe>=2.0 (from jinja2<3.1.0) Downloading MarkupSafe-2.1.3-cp310-cp310-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (25 kB) Collecting charset-normalizer<4,>=2 (from requests>=2.0.0->sphinx<2) Downloading charset_normalizer-3.2.0-cp310-cp310-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (201 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 201.8/201.8 kB 270.3 MB/s eta 0:00:00 Collecting idna<4,>=2.5 (from requests>=2.0.0->sphinx<2) Downloading idna-3.4-py3-none-any.whl (61 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 61.5/61.5 kB 244.3 MB/s eta 0:00:00 Collecting urllib3<3,>=1.21.1 (from requests>=2.0.0->sphinx<2) Downloading urllib3-2.0.3-py3-none-any.whl (123 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 123.6/123.6 kB 272.7 MB/s eta 0:00:00 Collecting certifi>=2017.4.17 (from requests>=2.0.0->sphinx<2) Downloading certifi-2023.5.7-py3-none-any.whl (156 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 157.0/157.0 kB 278.0 MB/s eta 0:00:00 Collecting sphinxcontrib-serializinghtml (from sphinxcontrib-websupport->sphinx<2) Downloading sphinxcontrib_serializinghtml-1.1.5-py2.py3-none-any.whl (94 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 94.0/94.0 kB 265.9 MB/s eta 0:00:00 Building wheels for collected packages: mock Building wheel for mock (setup.py): started Building wheel for mock (setup.py): finished with status 'done' Created wheel for mock: filename=mock-1.0.1-py3-none-any.whl size=23753 sha256=0ae9cf4756afe08ee861c6ebc8e97c1900705a5cee6f4deb62a358eb475476a2 Stored in directory: /tmp/pip-ephem-wheel-cache-blmt1_p4/wheels/df/9a/50/99d488b71fc0b027f0d316f4e447cdc9b973c67e1e7e4abc4b Successfully built mock Installing collected packages: snowballstemmer, mock, commonmark, urllib3, sphinxcontrib-serializinghtml, six, Pygments, pillow, packaging, MarkupSafe, imagesize, idna, docutils, charset-normalizer, certifi, babel, alabaster, sphinxcontrib-websupport, requests, jinja2, sphinx, readthedocs-sphinx-ext, sphinx-rtd-theme, recommonmark Successfully installed MarkupSafe-2.1.3 Pygments-2.15.1 alabaster-0.7.13 babel-2.12.1 certifi-2023.5.7 charset-normalizer-3.2.0 commonmark-0.9.1 docutils-0.17.1 idna-3.4 imagesize-1.4.1 jinja2-3.0.3 mock-1.0.1 packaging-23.1 pillow-10.0.0 readthedocs-sphinx-ext-2.2.2 recommonmark-0.5.0 requests-2.31.0 six-1.16.0 snowballstemmer-2.2.0 sphinx-1.8.6 sphinx-rtd-theme-0.4.3 sphinxcontrib-serializinghtml-1.1.5 sphinxcontrib-websupport-1.2.4 urllib3-2.0.3 [rtd-command-info] start-time: 2023-07-11T09:46:29.065575Z, end-time: 2023-07-11T09:46:44.595590Z, duration: 15, exit-code: 0 python -m pip install --exists-action=w --no-cache-dir -r docs/requirements.txt Collecting linkify-it-py==1.0.1 (from -r docs/requirements.txt (line 1)) Downloading linkify_it_py-1.0.1-py3-none-any.whl (19 kB) Collecting myst-parser==0.15.2 (from -r docs/requirements.txt (line 2)) Downloading myst_parser-0.15.2-py3-none-any.whl (46 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 46.3/46.3 kB 3.1 MB/s eta 0:00:00 Collecting Pillow==8.3.2 (from -r docs/requirements.txt (line 3)) Downloading Pillow-8.3.2-cp310-cp310-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (3.0 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.0/3.0 MB 14.0 MB/s eta 0:00:00 Collecting pluggy==1.0.0 (from -r docs/requirements.txt (line 4)) Downloading pluggy-1.0.0-py2.py3-none-any.whl (13 kB) Collecting pylint==2.11.1 (from -r docs/requirements.txt (line 5)) Downloading pylint-2.11.1-py3-none-any.whl (392 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 392.1/392.1 kB 34.6 MB/s eta 0:00:00 Collecting PyYAML==5.4.1 (from -r docs/requirements.txt (line 6)) Downloading PyYAML-5.4.1.tar.gz (175 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 175.1/175.1 kB 70.8 MB/s eta 0:00:00 Installing build dependencies: started Installing build dependencies: finished with status 'done' Getting requirements to build wheel: started Getting requirements to build wheel: finished with status 'done' Preparing metadata (pyproject.toml): started Preparing metadata (pyproject.toml): finished with status 'done' Collecting requests==2.27.0 (from -r docs/requirements.txt (line 7)) Downloading requests-2.27.0-py2.py3-none-any.whl (63 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 63.1/63.1 kB 203.8 MB/s eta 0:00:00 Collecting ruamel.yaml==0.17.16 (from -r docs/requirements.txt (line 8)) Downloading ruamel.yaml-0.17.16-py3-none-any.whl (109 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 109.0/109.0 kB 212.1 MB/s eta 0:00:00 Collecting sphinx-argparse==0.3.1 (from -r docs/requirements.txt (line 9)) Downloading sphinx_argparse-0.3.1-py2.py3-none-any.whl (12 kB) Collecting sphinx-autoapi (from -r docs/requirements.txt (line 10)) Downloading sphinx_autoapi-2.1.1-py2.py3-none-any.whl (54 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 54.2/54.2 kB 216.6 MB/s eta 0:00:00 Collecting sphinx-autobuild==2021.3.14 (from -r docs/requirements.txt (line 11)) Downloading sphinx_autobuild-2021.3.14-py3-none-any.whl (9.9 kB) Collecting sphinx-reredirects (from -r docs/requirements.txt (line 12)) Downloading sphinx_reredirects-0.1.2-py3-none-any.whl (5.3 kB) Collecting sphinx-rtd-theme==1.0.0 (from -r docs/requirements.txt (line 13)) Downloading sphinx_rtd_theme-1.0.0-py2.py3-none-any.whl (2.8 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.8/2.8 MB 39.0 MB/s eta 0:00:00 Collecting sphinx-sitemap==2.2.0 (from -r docs/requirements.txt (line 14)) Downloading sphinx-sitemap-2.2.0.tar.gz (6.1 kB) Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting Sphinx==4.2.0 (from -r docs/requirements.txt (line 15)) Downloading Sphinx-4.2.0-py3-none-any.whl (3.1 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.1/3.1 MB 60.7 MB/s eta 0:00:00 Collecting sphinxcontrib-applehelp==1.0.2 (from -r docs/requirements.txt (line 16)) Downloading sphinxcontrib_applehelp-1.0.2-py2.py3-none-any.whl (121 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 121.2/121.2 kB 254.2 MB/s eta 0:00:00 Collecting sphinxcontrib-devhelp==1.0.2 (from -r docs/requirements.txt (line 17)) Downloading sphinxcontrib_devhelp-1.0.2-py2.py3-none-any.whl (84 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 84.7/84.7 kB 238.9 MB/s eta 0:00:00 Collecting sphinxcontrib-htmlhelp==2.0.0 (from -r docs/requirements.txt (line 18)) Downloading sphinxcontrib_htmlhelp-2.0.0-py2.py3-none-any.whl (100 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 100.5/100.5 kB 252.1 MB/s eta 0:00:00 Collecting sphinxcontrib-jsmath==1.0.1 (from -r docs/requirements.txt (line 19)) Downloading sphinxcontrib_jsmath-1.0.1-py2.py3-none-any.whl (5.1 kB) Collecting sphinxcontrib-plantuml==0.21 (from -r docs/requirements.txt (line 20)) Downloading sphinxcontrib-plantuml-0.21.tar.gz (11 kB) Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting sphinxcontrib-programoutput==0.17 (from -r docs/requirements.txt (line 21)) Downloading sphinxcontrib_programoutput-0.17-py2.py3-none-any.whl (22 kB) Collecting sphinxcontrib-qthelp==1.0.3 (from -r docs/requirements.txt (line 22)) Downloading sphinxcontrib_qthelp-1.0.3-py2.py3-none-any.whl (90 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 90.6/90.6 kB 237.2 MB/s eta 0:00:00 Requirement already satisfied: sphinxcontrib-serializinghtml==1.1.5 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda/envs/latest/lib/python3.10/site-packages (from -r docs/requirements.txt (line 23)) (1.1.5) Collecting tqdm>=4 (from -r docs/requirements.txt (line 24)) Downloading tqdm-4.65.0-py3-none-any.whl (77 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 77.1/77.1 kB 246.1 MB/s eta 0:00:00 Collecting uc-micro-py (from linkify-it-py==1.0.1->-r docs/requirements.txt (line 1)) Downloading uc_micro_py-1.0.2-py3-none-any.whl (6.2 kB) Requirement already satisfied: docutils<0.18,>=0.15 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda/envs/latest/lib/python3.10/site-packages (from myst-parser==0.15.2->-r docs/requirements.txt (line 2)) (0.17.1) Requirement already satisfied: jinja2 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda/envs/latest/lib/python3.10/site-packages (from myst-parser==0.15.2->-r docs/requirements.txt (line 2)) (3.0.3) Collecting markdown-it-py<2.0.0,>=1.0.0 (from myst-parser==0.15.2->-r docs/requirements.txt (line 2)) Downloading markdown_it_py-1.1.0-py3-none-any.whl (83 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 83.6/83.6 kB 221.2 MB/s eta 0:00:00 Collecting mdit-py-plugins~=0.2.8 (from myst-parser==0.15.2->-r docs/requirements.txt (line 2)) Downloading mdit_py_plugins-0.2.8-py3-none-any.whl (41 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 41.0/41.0 kB 207.6 MB/s eta 0:00:00 Collecting platformdirs>=2.2.0 (from pylint==2.11.1->-r docs/requirements.txt (line 5)) Downloading platformdirs-3.8.1-py3-none-any.whl (16 kB) Collecting astroid<2.9,>=2.8.0 (from pylint==2.11.1->-r docs/requirements.txt (line 5)) Downloading astroid-2.8.6-py3-none-any.whl (248 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 248.7/248.7 kB 221.8 MB/s eta 0:00:00 Collecting isort<6,>=4.2.5 (from pylint==2.11.1->-r docs/requirements.txt (line 5)) Downloading isort-5.12.0-py3-none-any.whl (91 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 91.2/91.2 kB 228.1 MB/s eta 0:00:00 Collecting mccabe<0.7,>=0.6 (from pylint==2.11.1->-r docs/requirements.txt (line 5)) Downloading mccabe-0.6.1-py2.py3-none-any.whl (8.6 kB) Collecting toml>=0.7.1 (from pylint==2.11.1->-r docs/requirements.txt (line 5)) Downloading toml-0.10.2-py2.py3-none-any.whl (16 kB) Collecting urllib3<1.27,>=1.21.1 (from requests==2.27.0->-r docs/requirements.txt (line 7)) Downloading urllib3-1.26.16-py2.py3-none-any.whl (143 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 143.1/143.1 kB 261.8 MB/s eta 0:00:00 Requirement already satisfied: certifi>=2017.4.17 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda/envs/latest/lib/python3.10/site-packages (from requests==2.27.0->-r docs/requirements.txt (line 7)) (2023.5.7) Collecting charset-normalizer~=2.0.0 (from requests==2.27.0->-r docs/requirements.txt (line 7)) Downloading charset_normalizer-2.0.12-py3-none-any.whl (39 kB) Requirement already satisfied: idna<4,>=2.5 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda/envs/latest/lib/python3.10/site-packages (from requests==2.27.0->-r docs/requirements.txt (line 7)) (3.4) Collecting livereload (from sphinx-autobuild==2021.3.14->-r docs/requirements.txt (line 11)) Downloading livereload-2.6.3-py2.py3-none-any.whl (24 kB) Collecting colorama (from sphinx-autobuild==2021.3.14->-r docs/requirements.txt (line 11)) Downloading colorama-0.4.6-py2.py3-none-any.whl (25 kB) Requirement already satisfied: six in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda/envs/latest/lib/python3.10/site-packages (from sphinx-sitemap==2.2.0->-r docs/requirements.txt (line 14)) (1.16.0) Requirement already satisfied: Pygments>=2.0 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda/envs/latest/lib/python3.10/site-packages (from Sphinx==4.2.0->-r docs/requirements.txt (line 15)) (2.15.1) Requirement already satisfied: snowballstemmer>=1.1 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda/envs/latest/lib/python3.10/site-packages (from Sphinx==4.2.0->-r docs/requirements.txt (line 15)) (2.2.0) Requirement already satisfied: babel>=1.3 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda/envs/latest/lib/python3.10/site-packages (from Sphinx==4.2.0->-r docs/requirements.txt (line 15)) (2.12.1) Requirement already satisfied: alabaster<0.8,>=0.7 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda/envs/latest/lib/python3.10/site-packages (from Sphinx==4.2.0->-r docs/requirements.txt (line 15)) (0.7.13) Requirement already satisfied: imagesize in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda/envs/latest/lib/python3.10/site-packages (from Sphinx==4.2.0->-r docs/requirements.txt (line 15)) (1.4.1) Requirement already satisfied: setuptools in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda/envs/latest/lib/python3.10/site-packages (from Sphinx==4.2.0->-r docs/requirements.txt (line 15)) (68.0.0) Requirement already satisfied: packaging in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda/envs/latest/lib/python3.10/site-packages (from Sphinx==4.2.0->-r docs/requirements.txt (line 15)) (23.1) Collecting anyascii (from sphinx-autoapi->-r docs/requirements.txt (line 10)) Downloading anyascii-0.3.2-py3-none-any.whl (289 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 289.9/289.9 kB 211.0 MB/s eta 0:00:00 INFO: pip is looking at multiple versions of sphinx-autoapi to determine which version is compatible with other requirements. This could take a while. Collecting sphinx-autoapi (from -r docs/requirements.txt (line 10)) Downloading sphinx_autoapi-2.1.0-py2.py3-none-any.whl (53 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 53.9/53.9 kB 229.6 MB/s eta 0:00:00 Downloading sphinx_autoapi-2.0.1-py2.py3-none-any.whl (55 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 55.8/55.8 kB 192.7 MB/s eta 0:00:00 Collecting unidecode (from sphinx-autoapi->-r docs/requirements.txt (line 10)) Downloading Unidecode-1.3.6-py3-none-any.whl (235 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 235.9/235.9 kB 252.7 MB/s eta 0:00:00 Collecting lazy-object-proxy>=1.4.0 (from astroid<2.9,>=2.8.0->pylint==2.11.1->-r docs/requirements.txt (line 5)) Downloading lazy_object_proxy-1.9.0-cp310-cp310-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl (63 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 63.3/63.3 kB 235.0 MB/s eta 0:00:00 Collecting wrapt<1.14,>=1.11 (from astroid<2.9,>=2.8.0->pylint==2.11.1->-r docs/requirements.txt (line 5)) Downloading wrapt-1.13.3-cp310-cp310-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_12_x86_64.manylinux2010_x86_64.whl (81 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 81.5/81.5 kB 251.9 MB/s eta 0:00:00 Requirement already satisfied: MarkupSafe>=2.0 in /home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda/envs/latest/lib/python3.10/site-packages (from jinja2->myst-parser==0.15.2->-r docs/requirements.txt (line 2)) (2.1.3) Collecting attrs<22,>=19 (from markdown-it-py<2.0.0,>=1.0.0->myst-parser==0.15.2->-r docs/requirements.txt (line 2)) Downloading attrs-21.4.0-py2.py3-none-any.whl (60 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 60.6/60.6 kB 238.5 MB/s eta 0:00:00 Collecting tornado (from livereload->sphinx-autobuild==2021.3.14->-r docs/requirements.txt (line 11)) Downloading tornado-6.3.2-cp38-abi3-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl (426 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 426.9/426.9 kB 153.3 MB/s eta 0:00:00 Building wheels for collected packages: PyYAML, sphinx-sitemap, sphinxcontrib-plantuml Building wheel for PyYAML (pyproject.toml): started Building wheel for PyYAML (pyproject.toml): finished with status 'done' Created wheel for PyYAML: filename=PyYAML-5.4.1-cp310-cp310-linux_x86_64.whl size=45658 sha256=60cb44e2b7d407bb93c6c0abd452989971ab33c44bc4bd61a2b0406724342f7c Stored in directory: /tmp/pip-ephem-wheel-cache-wr8wn75v/wheels/c7/0d/22/696ee92245ad710f506eee79bb05c740d8abccd3ecdb778683 Building wheel for sphinx-sitemap (setup.py): started Building wheel for sphinx-sitemap (setup.py): finished with status 'done' Created wheel for sphinx-sitemap: filename=sphinx_sitemap-2.2.0-py3-none-any.whl size=6049 sha256=35cb4e402b6476f9a665f5d3b0c14b0c8b18a0f36c1ebf0c4f039aae6fafa02b Stored in directory: /tmp/pip-ephem-wheel-cache-wr8wn75v/wheels/2b/13/98/a3a68cf2efaf51a2eaf69f1d138d2749bd1aeceb3d2d455aeb Building wheel for sphinxcontrib-plantuml (setup.py): started Building wheel for sphinxcontrib-plantuml (setup.py): finished with status 'done' Created wheel for sphinxcontrib-plantuml: filename=sphinxcontrib_plantuml-0.21-py3-none-any.whl size=10436 sha256=b64aa50220c9c1a1abd48832498e7af5fcf9967060856b5c73403824dc623e8b Stored in directory: /tmp/pip-ephem-wheel-cache-wr8wn75v/wheels/02/19/48/63090607bf042dc6385b81561b120f094b4b7331016d30c616 Successfully built PyYAML sphinx-sitemap sphinxcontrib-plantuml Installing collected packages: mccabe, wrapt, urllib3, unidecode, uc-micro-py, tqdm, tornado, toml, sphinxcontrib-qthelp, sphinxcontrib-jsmath, sphinxcontrib-htmlhelp, sphinxcontrib-devhelp, sphinxcontrib-applehelp, ruamel.yaml, PyYAML, pluggy, platformdirs, Pillow, lazy-object-proxy, isort, colorama, charset-normalizer, attrs, requests, markdown-it-py, livereload, linkify-it-py, astroid, Sphinx, pylint, mdit-py-plugins, sphinxcontrib-programoutput, sphinxcontrib-plantuml, sphinx-sitemap, sphinx-rtd-theme, sphinx-reredirects, sphinx-autobuild, sphinx-autoapi, sphinx-argparse, myst-parser Attempting uninstall: urllib3 Found existing installation: urllib3 2.0.3 Uninstalling urllib3-2.0.3: Successfully uninstalled urllib3-2.0.3 Attempting uninstall: Pillow Found existing installation: Pillow 10.0.0 Uninstalling Pillow-10.0.0: Successfully uninstalled Pillow-10.0.0 Attempting uninstall: charset-normalizer Found existing installation: charset-normalizer 3.2.0 Uninstalling charset-normalizer-3.2.0: Successfully uninstalled charset-normalizer-3.2.0 Attempting uninstall: requests Found existing installation: requests 2.31.0 Uninstalling requests-2.31.0: Successfully uninstalled requests-2.31.0 Attempting uninstall: Sphinx Found existing installation: Sphinx 1.8.6 Uninstalling Sphinx-1.8.6: Successfully uninstalled Sphinx-1.8.6 Attempting uninstall: sphinx-rtd-theme Found existing installation: sphinx-rtd-theme 0.4.3 Uninstalling sphinx-rtd-theme-0.4.3: Successfully uninstalled sphinx-rtd-theme-0.4.3 Successfully installed Pillow-8.3.2 PyYAML-5.4.1 Sphinx-4.2.0 astroid-2.8.6 attrs-21.4.0 charset-normalizer-2.0.12 colorama-0.4.6 isort-5.12.0 lazy-object-proxy-1.9.0 linkify-it-py-1.0.1 livereload-2.6.3 markdown-it-py-1.1.0 mccabe-0.6.1 mdit-py-plugins-0.2.8 myst-parser-0.15.2 platformdirs-3.8.1 pluggy-1.0.0 pylint-2.11.1 requests-2.27.0 ruamel.yaml-0.17.16 sphinx-argparse-0.3.1 sphinx-autoapi-2.0.1 sphinx-autobuild-2021.3.14 sphinx-reredirects-0.1.2 sphinx-rtd-theme-1.0.0 sphinx-sitemap-2.2.0 sphinxcontrib-applehelp-1.0.2 sphinxcontrib-devhelp-1.0.2 sphinxcontrib-htmlhelp-2.0.0 sphinxcontrib-jsmath-1.0.1 sphinxcontrib-plantuml-0.21 sphinxcontrib-programoutput-0.17 sphinxcontrib-qthelp-1.0.3 toml-0.10.2 tornado-6.3.2 tqdm-4.65.0 uc-micro-py-1.0.2 unidecode-1.3.6 urllib3-1.26.16 wrapt-1.13.3 [rtd-command-info] start-time: 2023-07-11T09:46:46.198254Z, end-time: 2023-07-11T09:46:50.509070Z, duration: 4, exit-code: 0 python -m pip install --no-deps --no-cache-dir --editable . Obtaining file:///home/docs/checkouts/readthedocs.org/user_builds/continuumio-conda/checkouts/latest Installing build dependencies: started Installing build dependencies: finished with status 'done' Checking if build backend supports build_editable: started Checking if build backend supports build_editable: finished with status 'done' Getting requirements to build editable: started Getting requirements to build editable: finished with status 'done' Preparing editable metadata (pyproject.toml): started Preparing editable metadata (pyproject.toml): finished with status 'done' Building wheels for collected packages: conda Building editable for conda (pyproject.toml): started Building editable for conda (pyproject.toml): finished with status 'done' Created wheel for conda: filename=conda-23.5.1.dev64-py3-none-any.whl size=9514 sha256=988bff8aae018b36f0ac4294ef8c5b8e0bb3446d0e032a1d51109f63064a41db Stored in directory: /tmp/pip-ephem-wheel-cache-pspxs6sk/wheels/1a/34/35/b41ff4e2facba23ac1ab3d494ea037ca79706228febe865efe Successfully built conda Installing collected packages: conda Successfully installed conda-23.5.1.dev64 [rtd-command-info] start-time: 2023-07-11T09:46:58.094916Z, end-time: 2023-07-11T09:46:58.157653Z, duration: 0, exit-code: 0 cat docs/source/conf.py #!/usr/bin/env python3 # Copyright (C) 2012 Anaconda, Inc # SPDX-License-Identifier: BSD-3-Clause import os.path import sys from pathlib import Path # expose custom extensions sys.path.insert(0, os.path.abspath("_extensions")) # expose source code for import sys.path.insert(0, os.path.abspath("../..")) import conda # -- Project information ----------------------------------------------------- project = conda.__name__ copyright = "2017, Anaconda, Inc" author = conda.__author__ version = release = conda.__version__ # -- General configuration ------------------------------------------------ # Add any Sphinx extension module names here, as strings. They can be # extensions coming with Sphinx (named 'sphinx.ext.*') or your custom # ones. extensions = [ "autoapi.extension", "conda_umls", "myst_parser", "sphinx.ext.autodoc", "sphinx.ext.autosectionlabel", "sphinx.ext.autosummary", "sphinx.ext.graphviz", "sphinx.ext.ifconfig", "sphinx.ext.inheritance_diagram", "sphinx.ext.intersphinx", "sphinx.ext.napoleon", "sphinx_reredirects", "sphinx_sitemap", "sphinxarg.ext", "sphinxcontrib.plantuml", "sphinxcontrib.programoutput", ] # Leave double dashes as they are in the docs. Don't replace -- with - smartquotes = False # If true, the current module name will be prepended to all description # unit titles (such as .. function::). add_module_names = False # -- Options for HTML output ---------------------------------------------- # The theme to use for HTML and HTML Help pages. See the documentation for # a list of builtin themes. html_theme = "sphinx_rtd_theme" # Add any paths that contain custom static files (such as style sheets) here, # relative to this directory. They are copied after the builtin static files, # so a file named "default.css" will overwrite the builtin "default.css". html_static_path = ["_static"] html_style = "css/custom.css" # The name of an image file (relative to this directory) to use as a favicon of # the docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32 # pixels large. html_favicon = "img/conda-logo.png" # Add any extra paths that contain custom files (such as robots.txt or # .htaccess) here, relative to this directory. These files are copied # directly to the root of the documentation. html_extra_path = [ # Serving the robots.txt since we want to point to the sitemap.xml file "robots.txt", ] html_js_files = [ "https://cdn.jsdelivr.net/npm/jspanel4@4.12.0/dist/jspanel.js", "https://cdn.jsdelivr.net/npm/jspanel4@4.12.0/dist/extensions/modal/jspanel.modal.js", "https://unpkg.com/@panzoom/panzoom@4.4.1/dist/panzoom.min.js", "js/panzoom.js", ] html_css_files = ["https://cdn.jsdelivr.net/npm/jspanel4@4.12.0/dist/jspanel.css"] # Setting the prod URL of the site here as the base URL. html_baseurl = f"https://docs.conda.io/projects/{project}/" html_theme_options = { # The maximum depth of the table of contents tree. Set this to -1 to allow # unlimited depth. "navigation_depth": -1, } # -- sphinxcontrib.plantuml ------------------------------------------------ plantuml_output_format = "svg_img" plantuml_jarfile_path = Path(__file__).parent.parent / "_build" / "plantuml.jar" plantuml = f"java -Djava.awt.headless=true -jar {plantuml_jarfile_path}" # -- For sphinx.ext.intersphinx -------------------------------------------- intersphinx_mapping = { "python": ("https://docs.python.org/3", None), "pluggy": ("https://pluggy.readthedocs.io/en/stable/", None), } # -- For sphinx_sitemap ---------------------------------------------------- sitemap_locales = [None] sitemap_url_scheme = "{lang}stable/{link}" # -- For myst_parser ------------------------------------------------------- myst_heading_anchors = 3 myst_enable_extensions = [ "amsmath", "colon_fence", "deflist", "dollarmath", "html_admonition", "html_image", "linkify", "replacements", "smartquotes", "substitution", "tasklist", ] # -- For autoapi.extension ------------------------------------------------- autoapi_dirs = ["../../conda", "../../conda_env"] autoapi_root = "dev-guide/api" # Manually inserted into TOC in dev-guide/api.rst for proper integration into # folder-view autoapi_add_toctree_entry = False autoapi_template_dir = "_templates/autoapi" def skip_log(app, what, name, obj, skip, options): if what == "data" and name.split(".")[-1] == "log": skip = True return skip def setup(sphinx): sphinx.connect("autoapi-skip-member", skip_log) # -- For sphinx_reredirects ------------------------------------------------ redirects = { # internal redirects "admin": "user-guide/configuration/admin-multi-user-install.html", "api/api": "../../dev-guide/api/conda/api.html", "api/index": "../../dev-guide/api.html", "api/python_api": "../../dev-guide/api/conda/cli/python_api.html", "api/solver": "../../dev-guide/api/conda/api.html#conda.api.Solver", "changelog": "release-notes.html", "channels": "user-guide/tasks/manage-channels.html", "commands": "commands/index.html", "config": "user-guide/configuration/index.html", "custom-channels": "user-guide/tasks/create-custom-channels.html", "download": "user-guide/install/download.html", "env-commands": "commands/index.html", "faq": "user-guide/tasks/index.html", "general-commands": "commands/index.html", "get-started": "user-guide/index.html", "help/conda-pip-virtualenv-translator": "../commands/index.html", "help/silent": "../user-guide/install/index.html", "install/central": "../user-guide/configuration/admin-multi-user-install.html", "install/full": "../user-guide/install/index.html", "install/quick": "../user-guide/install/index.html", "install/sample-condarc": "../user-guide/configuration/sample-condarc.html", "install/tab-completion": "../user-guide/configuration/enable-tab-completion.html", "installation": "user-guide/install/index.html", "intro": "index.html", "mro": "user-guide/tasks/use-mro-with-conda.html", "py2or3": "user-guide/tasks/manage-python.html", "r-with-conda": "user-guide/tasks/use-r-with-conda.html", "redirects": "index.html", "test-drive": "user-guide/getting-started.html", "troubleshooting": "user-guide/troubleshooting.html", "using/cheatsheet": "../user-guide/cheatsheet.html", "using/envs": "../user-guide/tasks/manage-environments.html", "using/index": "../user-guide/tasks/index.html", "using/pkgs": "../user-guide/tasks/manage-pkgs.html", "using/test-drive": "../user-guide/getting-started.html", "using/using": "../user-guide/tasks/manage-conda.html", # external redirects "travis": "https://github.com/conda-incubator/setup-miniconda", "user-guide/tasks/use-conda-with-travis-ci": "https://github.com/conda-incubator/setup-miniconda", "user-guide/tasks/use-mro-with-conda": "https://docs.anaconda.com/anaconda/user-guide/tasks/use-r-language", "user-guide/tasks/use-r-with-conda": "https://docs.anaconda.com/anaconda/user-guide/tasks/use-r-language", } ########################################################################### # auto-created readthedocs.org specific configuration # ########################################################################### # # The following code was added during an automated build on readthedocs.org # It is auto created and injected for every build. The result is based on the # conf.py.tmpl file found in the readthedocs.org codebase: # https://github.com/rtfd/readthedocs.org/blob/main/readthedocs/doc_builder/templates/doc_builder/conf.py.tmpl # # Note: this file shouldn't rely on extra dependencies. import importlib import sys import os.path # Borrowed from six. PY3 = sys.version_info[0] == 3 string_types = str if PY3 else basestring from sphinx import version_info # Get suffix for proper linking to GitHub # This is deprecated in Sphinx 1.3+, # as each page can have its own suffix if globals().get('source_suffix', False): if isinstance(source_suffix, string_types): SUFFIX = source_suffix elif isinstance(source_suffix, (list, tuple)): # Sphinx >= 1.3 supports list/tuple to define multiple suffixes SUFFIX = source_suffix[0] elif isinstance(source_suffix, dict): # Sphinx >= 1.8 supports a mapping dictionary for multiple suffixes SUFFIX = list(source_suffix.keys())[0] # make a ``list()`` for py2/py3 compatibility else: # default to .rst SUFFIX = '.rst' else: SUFFIX = '.rst' # Add RTD Static Path. Add to the end because it overwrites previous files. if not 'html_static_path' in globals(): html_static_path = [] if os.path.exists('_static'): html_static_path.append('_static') # Add RTD Theme only if they aren't overriding it already using_rtd_theme = ( ( 'html_theme' in globals() and html_theme in ['default'] and # Allow people to bail with a hack of having an html_style 'html_style' not in globals() ) or 'html_theme' not in globals() ) if using_rtd_theme: html_theme = 'sphinx_rtd_theme' html_style = None html_theme_options = {} # This following legacy behavior will gradually be sliced out until its deprecated and removed. # Skipped for Sphinx 6+ # Skipped by internal Feature flag SKIP_SPHINX_HTML_THEME_PATH # Skipped by all new projects since SKIP_SPHINX_HTML_THEME_PATH's introduction (jan 2023) if ( using_rtd_theme and version_info < (6,0) and not False ): theme = importlib.import_module('sphinx_rtd_theme') if 'html_theme_path' in globals(): html_theme_path.append(theme.get_html_theme_path()) else: html_theme_path = [theme.get_html_theme_path()] # Define websupport2_base_url and websupport2_static_url if globals().get('websupport2_base_url', False): websupport2_base_url = 'https://readthedocs.com/websupport' websupport2_static_url = 'https://assets.readthedocs.com/' #Add project information to the template context. context = { 'using_theme': using_rtd_theme, 'html_theme': html_theme, 'current_version': "latest", 'version_slug': "latest", 'MEDIA_URL': "https://media.readthedocs.com/media/", 'STATIC_URL': "https://assets.readthedocs.com/", 'PRODUCTION_DOMAIN': "readthedocs.com", 'proxied_static_path': "/_/static/", 'versions': [ ("latest", "/en/latest/"), ("stable", "/en/stable/"), ("23.5.x", "/en/23.5.x/"), ("23.3.x", "/en/23.3.x/"), ("23.1.x", "/en/23.1.x/"), ("22.11.x", "/en/22.11.x/"), ("22.9.x", "/en/22.9.x/"), ("4.14.x", "/en/4.14.x/"), ("4.13.x", "/en/4.13.x/"), ("4.12.x", "/en/4.12.x/"), ("4.11.x", "/en/4.11.x/"), ("4.6.1", "/en/4.6.1/"), ("4.6.0", "/en/4.6.0/"), ("4.4.x", "/en/4.4.x/"), ("main", "/en/main/"), ], 'downloads': [ ], 'subprojects': [ ], 'slug': 'continuumio-conda', 'name': u'conda', 'rtd_language': u'en', 'programming_language': u'py', 'canonical_url': '', 'analytics_code': 'UA-143852910-1', 'single_version': False, 'conf_py_path': '/docs/source/', 'api_host': 'https://readthedocs.com', 'github_user': 'conda', 'proxied_api_host': '/_', 'github_repo': 'conda', 'github_version': 'main', 'display_github': True, 'bitbucket_user': 'None', 'bitbucket_repo': 'None', 'bitbucket_version': 'main', 'display_bitbucket': False, 'gitlab_user': 'None', 'gitlab_repo': 'None', 'gitlab_version': 'main', 'display_gitlab': False, 'READTHEDOCS': True, 'using_theme': (html_theme == "default"), 'new_theme': (html_theme == "sphinx_rtd_theme"), 'source_suffix': SUFFIX, 'ad_free': False, 'docsearch_disabled': False, 'user_analytics_code': 'UA-143852910-1', 'global_analytics_code': 'UA-17997319-2', 'commit': '23700a70', } # For sphinx >=1.8 we can use html_baseurl to set the canonical URL. # https://www.sphinx-doc.org/en/master/usage/configuration.html#confval-html_baseurl if version_info >= (1, 8): if not globals().get('html_baseurl'): html_baseurl = context['canonical_url'] context['canonical_url'] = None if 'html_context' in globals(): for key in context: if key not in html_context: html_context[key] = context[key] else: html_context = context # Add custom RTD extension if 'extensions' in globals(): # Insert at the beginning because it can interfere # with other extensions. # See https://github.com/rtfd/readthedocs.org/pull/4054 extensions.insert(0, "readthedocs_ext.readthedocs") else: extensions = ["readthedocs_ext.readthedocs"] # Add External version warning banner to the external version documentation if 'branch' == 'external': extensions.insert(1, "readthedocs_ext.external_version_warning") readthedocs_vcs_url = 'None' readthedocs_build_url = 'https://readthedocs.com/projects/continuumio-conda/builds/1590561/' project_language = 'en' # User's Sphinx configurations language_user = globals().get('language', None) latex_engine_user = globals().get('latex_engine', None) latex_elements_user = globals().get('latex_elements', None) # Remove this once xindy gets installed in Docker image and XINDYOPS # env variable is supported # https://github.com/rtfd/readthedocs-docker-images/pull/98 latex_use_xindy = False chinese = any([ language_user in ('zh_CN', 'zh_TW'), project_language in ('zh_CN', 'zh_TW'), ]) japanese = any([ language_user == 'ja', project_language == 'ja', ]) if chinese: latex_engine = latex_engine_user or 'xelatex' latex_elements_rtd = { 'preamble': '\\usepackage[UTF8]{ctex}\n', } latex_elements = latex_elements_user or latex_elements_rtd elif japanese: latex_engine = latex_engine_user or 'platex' # Make sure our build directory is always excluded exclude_patterns = globals().get('exclude_patterns', []) exclude_patterns.extend(['_build'])