Read the Docs build information Build id: 1354431 Project: mdolab-mach-aero Version: latest Commit: a294810fd68f7c7787eadb0c209ad9932a869b23 Date: 2023-03-15T22:32:07.098832Z State: finished Success: True [rtd-command-info] start-time: 2023-03-15T22:32:08.858476Z, end-time: 2023-03-15T22:32:11.370474Z, duration: 2, exit-code: 0 git clone --no-single-branch --depth 50 https://github.com/mdolab/MACH-Aero.git . Cloning into '.'... [rtd-command-info] start-time: 2023-03-15T22:32:11.563078Z, end-time: 2023-03-15T22:32:11.926201Z, duration: 0, exit-code: 0 git checkout --force origin/main Note: switching to 'origin/main'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at a294810 Added hdf5=off flag to CGNS (#89) [rtd-command-info] start-time: 2023-03-15T22:32:12.102213Z, end-time: 2023-03-15T22:32:12.196459Z, duration: 0, exit-code: 0 git clean -d -f -f [rtd-command-info] start-time: 2023-03-15T22:32:13.216410Z, end-time: 2023-03-15T22:32:17.700027Z, duration: 4, exit-code: 0 python3.7 -mvirtualenv $READTHEDOCS_VIRTUALENV_PATH Using base prefix '/home/docs/.pyenv/versions/3.7.9' New python executable in /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/envs/latest/bin/python3.7 Also creating executable in /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/envs/latest/bin/python Installing setuptools, pip, wheel... done. [rtd-command-info] start-time: 2023-03-15T22:32:17.945011Z, end-time: 2023-03-15T22:32:19.776591Z, duration: 1, exit-code: 0 python -m pip install --upgrade --no-cache-dir pip setuptools<58.3.0 Requirement already satisfied: pip in /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/envs/latest/lib/python3.7/site-packages (23.0.1) Collecting setuptools<58.3.0 Downloading setuptools-58.2.0-py3-none-any.whl (946 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 946.1/946.1 kB 22.5 MB/s eta 0:00:00 Installing collected packages: setuptools Attempting uninstall: setuptools Found existing installation: setuptools 67.6.0 Uninstalling setuptools-67.6.0: Successfully uninstalled setuptools-67.6.0 Successfully installed setuptools-58.2.0 [rtd-command-info] start-time: 2023-03-15T22:32:19.969376Z, end-time: 2023-03-15T22:32:26.714512Z, duration: 6, exit-code: 0 python -m pip install --upgrade --no-cache-dir pillow mock==1.0.1 alabaster>=0.7,<0.8,!=0.7.5 commonmark==0.9.1 recommonmark==0.5.0 sphinx<2 sphinx-rtd-theme<0.5 readthedocs-sphinx-ext<2.3 jinja2<3.1.0 Collecting pillow Downloading Pillow-9.4.0-cp37-cp37m-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (3.3 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.3/3.3 MB 58.9 MB/s eta 0:00:00 Collecting mock==1.0.1 Downloading mock-1.0.1.zip (861 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 861.9/861.9 kB 235.9 MB/s eta 0:00:00 Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting alabaster!=0.7.5,<0.8,>=0.7 Downloading alabaster-0.7.13-py3-none-any.whl (13 kB) Collecting commonmark==0.9.1 Downloading commonmark-0.9.1-py2.py3-none-any.whl (51 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 51.1/51.1 kB 172.5 MB/s eta 0:00:00 Collecting recommonmark==0.5.0 Downloading recommonmark-0.5.0-py2.py3-none-any.whl (9.8 kB) Collecting sphinx<2 Downloading Sphinx-1.8.6-py2.py3-none-any.whl (3.1 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.1/3.1 MB 192.3 MB/s eta 0:00:00 Collecting sphinx-rtd-theme<0.5 Downloading sphinx_rtd_theme-0.4.3-py2.py3-none-any.whl (6.4 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 6.4/6.4 MB 98.7 MB/s eta 0:00:00 Collecting readthedocs-sphinx-ext<2.3 Downloading readthedocs_sphinx_ext-2.2.0-py2.py3-none-any.whl (11 kB) Collecting jinja2<3.1.0 Downloading Jinja2-3.0.3-py3-none-any.whl (133 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 133.6/133.6 kB 206.1 MB/s eta 0:00:00 Collecting docutils>=0.11 Downloading docutils-0.19-py3-none-any.whl (570 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 570.5/570.5 kB 229.9 MB/s eta 0:00:00 Collecting snowballstemmer>=1.1 Downloading snowballstemmer-2.2.0-py2.py3-none-any.whl (93 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 93.0/93.0 kB 198.1 MB/s eta 0:00:00 Collecting requests>=2.0.0 Downloading requests-2.28.2-py3-none-any.whl (62 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 62.8/62.8 kB 191.1 MB/s eta 0:00:00 Requirement already satisfied: setuptools in /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/envs/latest/lib/python3.7/site-packages (from sphinx<2) (58.2.0) Collecting babel!=2.0,>=1.3 Downloading Babel-2.12.1-py3-none-any.whl (10.1 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 10.1/10.1 MB 180.5 MB/s eta 0:00:00 Collecting sphinxcontrib-websupport Downloading sphinxcontrib_websupport-1.2.4-py2.py3-none-any.whl (39 kB) Collecting imagesize Downloading imagesize-1.4.1-py2.py3-none-any.whl (8.8 kB) Collecting six>=1.5 Downloading six-1.16.0-py2.py3-none-any.whl (11 kB) Collecting docutils>=0.11 Downloading docutils-0.17.1-py2.py3-none-any.whl (575 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 575.5/575.5 kB 234.7 MB/s eta 0:00:00 Collecting Pygments>=2.0 Downloading Pygments-2.14.0-py3-none-any.whl (1.1 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.1/1.1 MB 240.5 MB/s eta 0:00:00 Collecting packaging Downloading packaging-23.0-py3-none-any.whl (42 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 42.7/42.7 kB 164.3 MB/s eta 0:00:00 Collecting MarkupSafe>=2.0 Downloading MarkupSafe-2.1.2-cp37-cp37m-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (25 kB) Collecting pytz>=2015.7 Downloading pytz-2022.7.1-py2.py3-none-any.whl (499 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 499.4/499.4 kB 225.8 MB/s eta 0:00:00 Collecting idna<4,>=2.5 Downloading idna-3.4-py3-none-any.whl (61 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 61.5/61.5 kB 96.1 MB/s eta 0:00:00 Collecting charset-normalizer<4,>=2 Downloading charset_normalizer-3.1.0-cp37-cp37m-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (171 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 171.0/171.0 kB 205.1 MB/s eta 0:00:00 Collecting certifi>=2017.4.17 Downloading certifi-2022.12.7-py3-none-any.whl (155 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 155.3/155.3 kB 214.9 MB/s eta 0:00:00 Collecting urllib3<1.27,>=1.21.1 Downloading urllib3-1.26.15-py2.py3-none-any.whl (140 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 140.9/140.9 kB 201.2 MB/s eta 0:00:00 Collecting sphinxcontrib-serializinghtml Downloading sphinxcontrib_serializinghtml-1.1.5-py2.py3-none-any.whl (94 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 94.0/94.0 kB 199.9 MB/s eta 0:00:00 Building wheels for collected packages: mock Building wheel for mock (setup.py): started Building wheel for mock (setup.py): finished with status 'done' Created wheel for mock: filename=mock-1.0.1-py3-none-any.whl size=23772 sha256=e6d8c68dff520929a5fa1ed660617aab640b72fcad78015126e832da9c4f0769 Stored in directory: /tmp/pip-ephem-wheel-cache-2gcpft5e/wheels/7a/94/b1/0fdc5339a5bd487a5cc15421ec200d9ba3e2aa7190e4a727f1 Successfully built mock Installing collected packages: snowballstemmer, pytz, mock, commonmark, urllib3, sphinxcontrib-serializinghtml, six, Pygments, pillow, packaging, MarkupSafe, imagesize, idna, docutils, charset-normalizer, certifi, babel, alabaster, sphinxcontrib-websupport, requests, jinja2, sphinx, readthedocs-sphinx-ext, sphinx-rtd-theme, recommonmark Successfully installed MarkupSafe-2.1.2 Pygments-2.14.0 alabaster-0.7.13 babel-2.12.1 certifi-2022.12.7 charset-normalizer-3.1.0 commonmark-0.9.1 docutils-0.17.1 idna-3.4 imagesize-1.4.1 jinja2-3.0.3 mock-1.0.1 packaging-23.0 pillow-9.4.0 pytz-2022.7.1 readthedocs-sphinx-ext-2.2.0 recommonmark-0.5.0 requests-2.28.2 six-1.16.0 snowballstemmer-2.2.0 sphinx-1.8.6 sphinx-rtd-theme-0.4.3 sphinxcontrib-serializinghtml-1.1.5 sphinxcontrib-websupport-1.2.4 urllib3-1.26.15 [rtd-command-info] start-time: 2023-03-15T22:32:26.936453Z, end-time: 2023-03-15T22:32:34.305902Z, duration: 7, exit-code: 0 python -m pip install --exists-action=w --no-cache-dir -r requirements.txt Collecting sphinx_mdolab_theme Downloading sphinx_mdolab_theme-1.4.2-py3-none-any.whl (45 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 45.1/45.1 kB 4.7 MB/s eta 0:00:00 Collecting sphinx-rtd-theme>=0.5 Downloading sphinx_rtd_theme-1.2.0-py2.py3-none-any.whl (2.8 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.8/2.8 MB 55.0 MB/s eta 0:00:00 Collecting sphinxcontrib-bibtex Downloading sphinxcontrib_bibtex-2.5.0-py3-none-any.whl (39 kB) Collecting sphinx-tabs Downloading sphinx_tabs-3.4.1-py3-none-any.whl (10.0 kB) Collecting sphinx>=3.0 Downloading sphinx-5.3.0-py3-none-any.whl (3.2 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.2/3.2 MB 177.1 MB/s eta 0:00:00 Collecting numpydoc Downloading numpydoc-1.5.0-py3-none-any.whl (52 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 52.4/52.4 kB 174.7 MB/s eta 0:00:00 Collecting redbaron Downloading redbaron-0.9.2-py2.py3-none-any.whl (34 kB) Collecting numpy Downloading numpy-1.21.6-cp37-cp37m-manylinux_2_12_x86_64.manylinux2010_x86_64.whl (15.7 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 15.7/15.7 MB 162.1 MB/s eta 0:00:00 Collecting pyyaml Downloading PyYAML-6.0-cp37-cp37m-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_12_x86_64.manylinux2010_x86_64.whl (596 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 596.3/596.3 kB 235.8 MB/s eta 0:00:00 Collecting sphinx-prompt Downloading sphinx_prompt-1.5.0-py3-none-any.whl (4.5 kB) Collecting sphinxcontrib-autoprogram Downloading sphinxcontrib_autoprogram-0.1.8-py2.py3-none-any.whl (8.8 kB) Collecting sphinx-copybutton Downloading sphinx_copybutton-0.5.1-py3-none-any.whl (13 kB) Collecting importlib-metadata>=4.8 Downloading importlib_metadata-6.0.0-py3-none-any.whl (21 kB) Requirement already satisfied: imagesize>=1.3 in /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/envs/latest/lib/python3.7/site-packages (from sphinx>=3.0->sphinx_mdolab_theme->-r requirements.txt (line 1)) (1.4.1) Requirement already satisfied: Pygments>=2.12 in /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/envs/latest/lib/python3.7/site-packages (from sphinx>=3.0->sphinx_mdolab_theme->-r requirements.txt (line 1)) (2.14.0) Requirement already satisfied: babel>=2.9 in /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/envs/latest/lib/python3.7/site-packages (from sphinx>=3.0->sphinx_mdolab_theme->-r requirements.txt (line 1)) (2.12.1) Requirement already satisfied: Jinja2>=3.0 in /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/envs/latest/lib/python3.7/site-packages (from sphinx>=3.0->sphinx_mdolab_theme->-r requirements.txt (line 1)) (3.0.3) Requirement already satisfied: snowballstemmer>=2.0 in /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/envs/latest/lib/python3.7/site-packages (from sphinx>=3.0->sphinx_mdolab_theme->-r requirements.txt (line 1)) (2.2.0) Requirement already satisfied: alabaster<0.8,>=0.7 in /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/envs/latest/lib/python3.7/site-packages (from sphinx>=3.0->sphinx_mdolab_theme->-r requirements.txt (line 1)) (0.7.13) Requirement already satisfied: sphinxcontrib-serializinghtml>=1.1.5 in /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/envs/latest/lib/python3.7/site-packages (from sphinx>=3.0->sphinx_mdolab_theme->-r requirements.txt (line 1)) (1.1.5) Requirement already satisfied: packaging>=21.0 in /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/envs/latest/lib/python3.7/site-packages (from sphinx>=3.0->sphinx_mdolab_theme->-r requirements.txt (line 1)) (23.0) Collecting sphinxcontrib-applehelp Downloading sphinxcontrib_applehelp-1.0.2-py2.py3-none-any.whl (121 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 121.2/121.2 kB 220.9 MB/s eta 0:00:00 Collecting sphinxcontrib-htmlhelp>=2.0.0 Downloading sphinxcontrib_htmlhelp-2.0.0-py2.py3-none-any.whl (100 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 100.5/100.5 kB 215.0 MB/s eta 0:00:00 Collecting sphinxcontrib-devhelp Downloading sphinxcontrib_devhelp-1.0.2-py2.py3-none-any.whl (84 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 84.7/84.7 kB 201.6 MB/s eta 0:00:00 Requirement already satisfied: requests>=2.5.0 in /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/envs/latest/lib/python3.7/site-packages (from sphinx>=3.0->sphinx_mdolab_theme->-r requirements.txt (line 1)) (2.28.2) Collecting sphinxcontrib-jsmath Downloading sphinxcontrib_jsmath-1.0.1-py2.py3-none-any.whl (5.1 kB) Collecting sphinxcontrib-qthelp Downloading sphinxcontrib_qthelp-1.0.3-py2.py3-none-any.whl (90 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 90.6/90.6 kB 206.7 MB/s eta 0:00:00 Requirement already satisfied: docutils<0.20,>=0.14 in /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/envs/latest/lib/python3.7/site-packages (from sphinx>=3.0->sphinx_mdolab_theme->-r requirements.txt (line 1)) (0.17.1) Collecting sphinxcontrib-jquery!=3.0.0,>=2.0.0 Downloading sphinxcontrib_jquery-4.1-py2.py3-none-any.whl (121 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 121.1/121.1 kB 202.7 MB/s eta 0:00:00 Collecting baron>=0.7 Downloading baron-0.10.1-py2.py3-none-any.whl (45 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 45.6/45.6 kB 163.0 MB/s eta 0:00:00 Collecting docutils<0.20,>=0.14 Downloading docutils-0.18.1-py2.py3-none-any.whl (570 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 570.0/570.0 kB 206.4 MB/s eta 0:00:00 Requirement already satisfied: six in /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/envs/latest/lib/python3.7/site-packages (from sphinxcontrib-autoprogram->sphinx_mdolab_theme->-r requirements.txt (line 1)) (1.16.0) Collecting pybtex>=0.24 Downloading pybtex-0.24.0-py2.py3-none-any.whl (561 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 561.4/561.4 kB 234.6 MB/s eta 0:00:00 Collecting pybtex-docutils>=1.0.0 Downloading pybtex_docutils-1.0.2-py3-none-any.whl (6.3 kB) Requirement already satisfied: pytz>=2015.7 in /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/envs/latest/lib/python3.7/site-packages (from babel>=2.9->sphinx>=3.0->sphinx_mdolab_theme->-r requirements.txt (line 1)) (2022.7.1) Collecting rply Downloading rply-0.7.8-py2.py3-none-any.whl (16 kB) Collecting typing-extensions>=3.6.4 Downloading typing_extensions-4.5.0-py3-none-any.whl (27 kB) Collecting zipp>=0.5 Downloading zipp-3.15.0-py3-none-any.whl (6.8 kB) Requirement already satisfied: MarkupSafe>=2.0 in /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/envs/latest/lib/python3.7/site-packages (from Jinja2>=3.0->sphinx>=3.0->sphinx_mdolab_theme->-r requirements.txt (line 1)) (2.1.2) Collecting latexcodec>=1.0.4 Downloading latexcodec-2.0.1-py2.py3-none-any.whl (18 kB) Requirement already satisfied: charset-normalizer<4,>=2 in /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/envs/latest/lib/python3.7/site-packages (from requests>=2.5.0->sphinx>=3.0->sphinx_mdolab_theme->-r requirements.txt (line 1)) (3.1.0) Requirement already satisfied: urllib3<1.27,>=1.21.1 in /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/envs/latest/lib/python3.7/site-packages (from requests>=2.5.0->sphinx>=3.0->sphinx_mdolab_theme->-r requirements.txt (line 1)) (1.26.15) Requirement already satisfied: idna<4,>=2.5 in /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/envs/latest/lib/python3.7/site-packages (from requests>=2.5.0->sphinx>=3.0->sphinx_mdolab_theme->-r requirements.txt (line 1)) (3.4) Requirement already satisfied: certifi>=2017.4.17 in /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/envs/latest/lib/python3.7/site-packages (from requests>=2.5.0->sphinx>=3.0->sphinx_mdolab_theme->-r requirements.txt (line 1)) (2022.12.7) Collecting appdirs Downloading appdirs-1.4.4-py2.py3-none-any.whl (9.6 kB) Installing collected packages: appdirs, zipp, typing-extensions, sphinxcontrib-qthelp, sphinxcontrib-jsmath, sphinxcontrib-htmlhelp, sphinxcontrib-devhelp, sphinxcontrib-applehelp, rply, pyyaml, numpy, latexcodec, docutils, pybtex, importlib-metadata, baron, sphinx, redbaron, pybtex-docutils, sphinxcontrib-jquery, sphinxcontrib-bibtex, sphinxcontrib-autoprogram, sphinx-tabs, sphinx-prompt, sphinx-copybutton, numpydoc, sphinx-rtd-theme, sphinx_mdolab_theme Attempting uninstall: docutils Found existing installation: docutils 0.17.1 Uninstalling docutils-0.17.1: Successfully uninstalled docutils-0.17.1 Attempting uninstall: sphinx Found existing installation: Sphinx 1.8.6 Uninstalling Sphinx-1.8.6: Successfully uninstalled Sphinx-1.8.6 Attempting uninstall: sphinx-rtd-theme Found existing installation: sphinx-rtd-theme 0.4.3 Uninstalling sphinx-rtd-theme-0.4.3: Successfully uninstalled sphinx-rtd-theme-0.4.3 Successfully installed appdirs-1.4.4 baron-0.10.1 docutils-0.18.1 importlib-metadata-6.0.0 latexcodec-2.0.1 numpy-1.21.6 numpydoc-1.5.0 pybtex-0.24.0 pybtex-docutils-1.0.2 pyyaml-6.0 redbaron-0.9.2 rply-0.7.8 sphinx-5.3.0 sphinx-copybutton-0.5.1 sphinx-prompt-1.5.0 sphinx-rtd-theme-1.2.0 sphinx-tabs-3.4.1 sphinx_mdolab_theme-1.4.2 sphinxcontrib-applehelp-1.0.2 sphinxcontrib-autoprogram-0.1.8 sphinxcontrib-bibtex-2.5.0 sphinxcontrib-devhelp-1.0.2 sphinxcontrib-htmlhelp-2.0.0 sphinxcontrib-jquery-4.1 sphinxcontrib-jsmath-1.0.1 sphinxcontrib-qthelp-1.0.3 typing-extensions-4.5.0 zipp-3.15.0 [rtd-command-info] start-time: 2023-03-15T22:32:35.895434Z, end-time: 2023-03-15T22:32:35.975501Z, duration: 0, exit-code: 0 cat conf.py from sphinx_mdolab_theme.config import * # -- Project information ----------------------------------------------------- project = "MACH-Aero Documentation" # -- General configuration ----------------------------------------------------- # Specify the baseurls for the projects I want to link to repos = [ "pygeo", "pyoptsparse", "baseclasses", "idwarp", "adflow", "pyhyp", "multipoint", "pyspline", ] intersphinx_mapping = {r: (f"https://mdolab-{r}.readthedocs-hosted.com/en/latest", None) for r in repos} # bibtex bibtex_bibfiles = [ "machFramework/references.bib", "machAeroTutorials/overset.bib", ] ########################################################################### # auto-created readthedocs.org specific configuration # ########################################################################### # # The following code was added during an automated build on readthedocs.org # It is auto created and injected for every build. The result is based on the # conf.py.tmpl file found in the readthedocs.org codebase: # https://github.com/rtfd/readthedocs.org/blob/main/readthedocs/doc_builder/templates/doc_builder/conf.py.tmpl # # Note: this file shouldn't rely on extra dependencies. import importlib import sys import os.path # Borrowed from six. PY3 = sys.version_info[0] == 3 string_types = str if PY3 else basestring from sphinx import version_info # Get suffix for proper linking to GitHub # This is deprecated in Sphinx 1.3+, # as each page can have its own suffix if globals().get('source_suffix', False): if isinstance(source_suffix, string_types): SUFFIX = source_suffix elif isinstance(source_suffix, (list, tuple)): # Sphinx >= 1.3 supports list/tuple to define multiple suffixes SUFFIX = source_suffix[0] elif isinstance(source_suffix, dict): # Sphinx >= 1.8 supports a mapping dictionary for multiple suffixes SUFFIX = list(source_suffix.keys())[0] # make a ``list()`` for py2/py3 compatibility else: # default to .rst SUFFIX = '.rst' else: SUFFIX = '.rst' # Add RTD Static Path. Add to the end because it overwrites previous files. if not 'html_static_path' in globals(): html_static_path = [] if os.path.exists('_static'): html_static_path.append('_static') # Add RTD Theme only if they aren't overriding it already using_rtd_theme = ( ( 'html_theme' in globals() and html_theme in ['default'] and # Allow people to bail with a hack of having an html_style 'html_style' not in globals() ) or 'html_theme' not in globals() ) if using_rtd_theme: html_theme = 'sphinx_rtd_theme' html_style = None html_theme_options = {} # This following legacy behavior will gradually be sliced out until its deprecated and removed. # Skipped for Sphinx 6+ # Skipped by internal Feature flag SKIP_SPHINX_HTML_THEME_PATH # Skipped by all new projects since SKIP_SPHINX_HTML_THEME_PATH's introduction (jan 2023) if ( using_rtd_theme and version_info < (6,0) and not False ): theme = importlib.import_module('sphinx_rtd_theme') if 'html_theme_path' in globals(): html_theme_path.append(theme.get_html_theme_path()) else: html_theme_path = [theme.get_html_theme_path()] # Define websupport2_base_url and websupport2_static_url if globals().get('websupport2_base_url', False): websupport2_base_url = 'https://readthedocs.com/websupport' websupport2_static_url = 'https://assets.readthedocs.com/' #Add project information to the template context. context = { 'using_theme': using_rtd_theme, 'html_theme': html_theme, 'current_version': "latest", 'version_slug': "latest", 'MEDIA_URL': "https://media.readthedocs.com/media/", 'STATIC_URL': "https://assets.readthedocs.com/", 'PRODUCTION_DOMAIN': "readthedocs.com", 'proxied_static_path': "/_/static/", 'versions': [ ("latest", "/en/latest/"), ], 'downloads': [ ("html", "//mdolab-mach-aero.readthedocs-hosted.com/_/downloads/en/latest/htmlzip/"), ], 'subprojects': [ ], 'slug': 'mdolab-mach-aero', 'name': u'MACH-Aero', 'rtd_language': u'en', 'programming_language': u'words', 'canonical_url': 'https://mdolab-mach-aero.readthedocs-hosted.com/en/latest/', 'analytics_code': 'None', 'single_version': False, 'conf_py_path': '/', 'api_host': 'https://readthedocs.com', 'github_user': 'mdolab', 'proxied_api_host': '/_', 'github_repo': 'MACH-Aero', 'github_version': 'main', 'display_github': True, 'bitbucket_user': 'None', 'bitbucket_repo': 'None', 'bitbucket_version': 'main', 'display_bitbucket': False, 'gitlab_user': 'None', 'gitlab_repo': 'None', 'gitlab_version': 'main', 'display_gitlab': False, 'READTHEDOCS': True, 'using_theme': (html_theme == "default"), 'new_theme': (html_theme == "sphinx_rtd_theme"), 'source_suffix': SUFFIX, 'ad_free': False, 'docsearch_disabled': False, 'user_analytics_code': '', 'global_analytics_code': 'UA-17997319-2', 'commit': 'a294810f', } # For sphinx >=1.8 we can use html_baseurl to set the canonical URL. # https://www.sphinx-doc.org/en/master/usage/configuration.html#confval-html_baseurl if version_info >= (1, 8): if not globals().get('html_baseurl'): html_baseurl = context['canonical_url'] context['canonical_url'] = None if 'html_context' in globals(): html_context.update(context) else: html_context = context # Add custom RTD extension if 'extensions' in globals(): # Insert at the beginning because it can interfere # with other extensions. # See https://github.com/rtfd/readthedocs.org/pull/4054 extensions.insert(0, "readthedocs_ext.readthedocs") else: extensions = ["readthedocs_ext.readthedocs"] # Add External version warning banner to the external version documentation if 'branch' == 'external': extensions.insert(1, "readthedocs_ext.external_version_warning") readthedocs_vcs_url = 'None' readthedocs_build_url = 'https://readthedocs.com/projects/mdolab-mach-aero/builds/1354431/' project_language = 'en' # User's Sphinx configurations language_user = globals().get('language', None) latex_engine_user = globals().get('latex_engine', None) latex_elements_user = globals().get('latex_elements', None) # Remove this once xindy gets installed in Docker image and XINDYOPS # env variable is supported # https://github.com/rtfd/readthedocs-docker-images/pull/98 latex_use_xindy = False chinese = any([ language_user in ('zh_CN', 'zh_TW'), project_language in ('zh_CN', 'zh_TW'), ]) japanese = any([ language_user == 'ja', project_language == 'ja', ]) if chinese: latex_engine = latex_engine_user or 'xelatex' latex_elements_rtd = { 'preamble': '\\usepackage[UTF8]{ctex}\n', } latex_elements = latex_elements_user or latex_elements_rtd elif japanese: latex_engine = latex_engine_user or 'platex' # Make sure our build directory is always excluded exclude_patterns = globals().get('exclude_patterns', []) exclude_patterns.extend(['_build']) [rtd-command-info] start-time: 2023-03-15T22:32:36.188266Z, end-time: 2023-03-15T22:32:40.767295Z, duration: 4, exit-code: 0 python -m sphinx -T -E -b html -d _build/doctrees -D language=en . $READTHEDOCS_OUTPUT/html Running Sphinx v5.3.0 making output directory... done checking bibtex cache... out of date parsing bibtex file /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/checkouts/latest/machFramework/references.bib... parsed 6 entries parsing bibtex file /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/checkouts/latest/machAeroTutorials/overset.bib... parsed 3 entries [autosummary] generating autosummary for: index.rst, installInstructions/dockerInstructions.rst, installInstructions/install3rdPartyPackages.rst, installInstructions/installFromScratch.rst, machAeroTutorials/aero_adflow.rst, machAeroTutorials/aero_cgnsutils.rst, machAeroTutorials/aero_gridRefinementStudy.rst, machAeroTutorials/aero_icem.rst, machAeroTutorials/aero_overview.rst, machAeroTutorials/aero_pygeo.rst, ..., machAeroTutorials/overset_analysis.rst, machAeroTutorials/overset_overview.rst, machAeroTutorials/overset_surface_mesh.rst, machAeroTutorials/overset_theory.rst, machAeroTutorials/overset_tips.rst, machAeroTutorials/overset_volume_mesh.rst, machAeroTutorials/overset_vsp.rst, machFramework/MACH-Aero.rst, machFramework/citeUs.rst, machFramework/contribute.rst loading intersphinx inventory from https://mdolab-pygeo.readthedocs-hosted.com/en/latest/objects.inv... loading intersphinx inventory from https://mdolab-pyoptsparse.readthedocs-hosted.com/en/latest/objects.inv... loading intersphinx inventory from https://mdolab-baseclasses.readthedocs-hosted.com/en/latest/objects.inv... loading intersphinx inventory from https://mdolab-idwarp.readthedocs-hosted.com/en/latest/objects.inv... loading intersphinx inventory from https://mdolab-adflow.readthedocs-hosted.com/en/latest/objects.inv... loading intersphinx inventory from https://mdolab-pyhyp.readthedocs-hosted.com/en/latest/objects.inv... loading intersphinx inventory from https://mdolab-multipoint.readthedocs-hosted.com/en/latest/objects.inv... loading intersphinx inventory from https://mdolab-pyspline.readthedocs-hosted.com/en/latest/objects.inv... building [mo]: targets for 0 po files that are out of date building [html]: targets for 32 source files that are out of date updating environment: [new config] 32 added, 0 changed, 0 removed reading sources... [ 3%] index reading sources... [ 6%] installInstructions/dockerInstructions reading sources... [ 9%] installInstructions/install3rdPartyPackages reading sources... [ 12%] installInstructions/installFromScratch reading sources... [ 15%] machAeroTutorials/aero_adflow reading sources... [ 18%] machAeroTutorials/aero_cgnsutils reading sources... [ 21%] machAeroTutorials/aero_gridRefinementStudy reading sources... [ 25%] machAeroTutorials/aero_icem reading sources... [ 28%] machAeroTutorials/aero_overview reading sources... [ 31%] machAeroTutorials/aero_pygeo reading sources... [ 34%] machAeroTutorials/aero_pyhyp reading sources... [ 37%] machAeroTutorials/airfoilopt_ffd reading sources... [ 40%] machAeroTutorials/airfoilopt_mesh reading sources... [ 43%] machAeroTutorials/airfoilopt_multipoint reading sources... [ 46%] machAeroTutorials/airfoilopt_overview reading sources... [ 50%] machAeroTutorials/airfoilopt_singlepoint reading sources... [ 53%] machAeroTutorials/faq reading sources... [ 56%] machAeroTutorials/intro reading sources... [ 59%] machAeroTutorials/opt_aero reading sources... [ 62%] machAeroTutorials/opt_ffd reading sources... [ 65%] machAeroTutorials/opt_overview reading sources... [ 68%] machAeroTutorials/opt_pyopt reading sources... [ 71%] machAeroTutorials/overset_analysis reading sources... [ 75%] machAeroTutorials/overset_overview reading sources... [ 78%] machAeroTutorials/overset_surface_mesh reading sources... [ 81%] machAeroTutorials/overset_theory reading sources... [ 84%] machAeroTutorials/overset_tips reading sources... [ 87%] machAeroTutorials/overset_volume_mesh reading sources... [ 90%] machAeroTutorials/overset_vsp reading sources... [ 93%] machFramework/MACH-Aero reading sources... [ 96%] machFramework/citeUs reading sources... [100%] machFramework/contribute /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/checkouts/latest/machAeroTutorials/airfoilopt_ffd.rst:56: ERROR: Unexpected indentation. /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/checkouts/latest/machAeroTutorials/airfoilopt_ffd.rst:57: WARNING: Block quote ends without a blank line; unexpected unindent. looking for now-outdated files... none found pickling environment... done checking consistency... done preparing documents... done writing output... [ 3%] index writing output... [ 6%] installInstructions/dockerInstructions writing output... [ 9%] installInstructions/install3rdPartyPackages writing output... [ 12%] installInstructions/installFromScratch writing output... [ 15%] machAeroTutorials/aero_adflow writing output... [ 18%] machAeroTutorials/aero_cgnsutils writing output... [ 21%] machAeroTutorials/aero_gridRefinementStudy writing output... [ 25%] machAeroTutorials/aero_icem writing output... [ 28%] machAeroTutorials/aero_overview writing output... [ 31%] machAeroTutorials/aero_pygeo writing output... [ 34%] machAeroTutorials/aero_pyhyp writing output... [ 37%] machAeroTutorials/airfoilopt_ffd writing output... [ 40%] machAeroTutorials/airfoilopt_mesh writing output... [ 43%] machAeroTutorials/airfoilopt_multipoint writing output... [ 46%] machAeroTutorials/airfoilopt_overview writing output... [ 50%] machAeroTutorials/airfoilopt_singlepoint writing output... [ 53%] machAeroTutorials/faq writing output... [ 56%] machAeroTutorials/intro writing output... [ 59%] machAeroTutorials/opt_aero writing output... [ 62%] machAeroTutorials/opt_ffd writing output... [ 65%] machAeroTutorials/opt_overview writing output... [ 68%] machAeroTutorials/opt_pyopt writing output... [ 71%] machAeroTutorials/overset_analysis writing output... [ 75%] machAeroTutorials/overset_overview writing output... [ 78%] machAeroTutorials/overset_surface_mesh writing output... [ 81%] machAeroTutorials/overset_theory writing output... [ 84%] machAeroTutorials/overset_tips writing output... [ 87%] machAeroTutorials/overset_volume_mesh writing output... [ 90%] machAeroTutorials/overset_vsp writing output... [ 93%] machFramework/MACH-Aero writing output... [ 96%] machFramework/citeUs writing output... [100%] machFramework/contribute /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/checkouts/latest/machAeroTutorials/opt_aero.rst:114: WARNING: py:meth reference target not found: pygeo:pygeo.DVConstraints.setSurface /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/checkouts/latest/machAeroTutorials/opt_ffd.rst:207: WARNING: py:meth reference target not found: pygeo:pygeo.DVGeometry.extractCoef /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/checkouts/latest/machAeroTutorials/opt_ffd.rst:207: WARNING: py:meth reference target not found: pygeo:pygeo.DVGeometry.restoreCoef /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/checkouts/latest/machAeroTutorials/overset_volume_mesh.rst:149: WARNING: py:meth reference target not found: pyhyp:pyhyp.utils.simpleOCart generating indices... genindex done writing additional pages... search done copying images... [ 0%] machAeroTutorials/images/aero_wing_analysis_cp_contour.png copying images... [ 1%] machAeroTutorials/images/aero_wing_analysis_lift.png copying images... [ 2%] machAeroTutorials/images/aero_wing_analysis_slices.png copying images... [ 3%] machAeroTutorials/images/aero_wing_volume_mesh_coarsened.png copying images... [ 4%] machAeroTutorials/images/RAE2822_gridconvergence.png copying images... [ 5%] machAeroTutorials/images/meshexample.png copying images... [ 6%] machAeroTutorials/images/icem_AppearanceButtons.png copying images... [ 6%] machAeroTutorials/images/icem_ModelTree1.png copying images... [ 7%] machAeroTutorials/images/icem_CreatePart.png copying images... [ 8%] machAeroTutorials/images/icem_TabGeometry.png copying images... [ 9%] machAeroTutorials/images/icem_ModelTree2.png copying images... [ 10%] machAeroTutorials/images/icem_PointsCurveEnds.png copying images... [ 11%] machAeroTutorials/images/icem_CurveFromPoints.png copying images... [ 12%] machAeroTutorials/images/icem_TrailingEdgeCurves.png copying images... [ 13%] machAeroTutorials/images/icem_PointsParameter.png copying images... [ 13%] machAeroTutorials/images/icem_LeadingEdgeCurves.png copying images... [ 14%] machAeroTutorials/images/icem_TabBlocking.png copying images... [ 15%] machAeroTutorials/images/icem_CreateBlock.png copying images... [ 16%] machAeroTutorials/images/icem_Blocking3Dto2D.png copying images... [ 17%] machAeroTutorials/images/icem_ModelTree3.png copying images... [ 18%] machAeroTutorials/images/icem_DeleteBlock.png copying images... [ 19%] machAeroTutorials/images/icem_AssociateVertex.png copying images... [ 20%] machAeroTutorials/images/icem_AssociatedVertices.png copying images... [ 20%] machAeroTutorials/images/icem_EditEdge.png copying images... [ 21%] machAeroTutorials/images/icem_UpdatePreMesh.png copying images... [ 22%] machAeroTutorials/images/icem_BeforeMesh.png copying images... [ 23%] machAeroTutorials/images/icem_InitialTipParams.png copying images... [ 24%] machAeroTutorials/images/icem_BadMesh.png copying images... [ 25%] machAeroTutorials/images/icem_BadMeshQualityHisto.png copying images... [ 26%] machAeroTutorials/images/icem_SplitBlock.png copying images... [ 26%] machAeroTutorials/images/icem_SplitBlockHorizEdge.png copying images... [ 27%] machAeroTutorials/images/icem_BadMesh2.png copying images... [ 28%] machAeroTutorials/images/icem_Dissassociate.png copying images... [ 29%] machAeroTutorials/images/icem_SplitTips.png copying images... [ 30%] machAeroTutorials/images/icem_TipVertices.png copying images... [ 31%] machAeroTutorials/images/icem_BetterMesh.png copying images... [ 32%] machAeroTutorials/images/icem_BetterMeshQuality.png copying images... [ 33%] machAeroTutorials/images/icem_BlockOrientation.png copying images... [ 33%] machAeroTutorials/images/icem_SaveCGNS.png copying images... [ 34%] machAeroTutorials/images/RAE2822.png copying images... [ 35%] machAeroTutorials/images/aero_wing_geometry.png copying images... [ 36%] machAeroTutorials/images/aero_wing_volume_mesh.png copying images... [ 37%] machAeroTutorials/images/airfoil_ffd.png copying images... [ 38%] machAeroTutorials/images/airfoil_ffd_side.png copying images... [ 39%] machAeroTutorials/images/airfoil_surface_mesh.png copying images... [ 40%] machAeroTutorials/images/airfoil_p3d_mesh.png copying images... [ 40%] machAeroTutorials/images/airfoil_mesh.png copying images... [ 41%] machAeroTutorials/images/airfoil_mesh_zoom.png copying images... [ 42%] machAeroTutorials/images/airfoil_multi_opt.png copying images... [ 43%] machAeroTutorials/images/airfoil_single_opt.png copying images... [ 44%] machAeroTutorials/images/opt_thickness_and_vol_diagram.png copying images... [ 45%] machAeroTutorials/images/opt_constraints_dat.png copying images... [ 46%] machAeroTutorials/images/aero_wing_opt_cp_contour_compare.png copying images... [ 46%] machAeroTutorials/images/aero_wing_opt_lift_compare.png copying images... [ 47%] machAeroTutorials/images/aero_wing_opt_slices_compare.png copying images... [ 48%] machAeroTutorials/images/aero_wing_opt_hist.png copying images... [ 49%] machAeroTutorials/images/ffd_demo.png copying images... [ 50%] machAeroTutorials/images/wing_in_ffd.png copying images... [ 51%] machAeroTutorials/images/ffd_refaxis.png copying images... [ 52%] machAeroTutorials/images/ffd_designvars.png copying images... [ 53%] machAeroTutorials/images/ffd_deformed_ffd.png copying images... [ 53%] machAeroTutorials/images/ffd_deformed_surf_coords.png copying images... [ 54%] machAeroTutorials/images/opt_optview.png copying images... [ 55%] machAeroTutorials/images/opt_optpath.png copying images... [ 56%] machAeroTutorials/images/overset_analysis_adflow_plot.png copying images... [ 57%] machAeroTutorials/images/overset_grid_convergence.png copying images... [ 58%] machAeroTutorials/images/overset_m6_mesh_fields.png copying images... [ 59%] machAeroTutorials/images/overset_pointwise_overview.png copying images... [ 60%] machAeroTutorials/images/overset_pointwise_after_import.png copying images... [ 60%] machAeroTutorials/images/overset_pointwise_dat1.png copying images... [ 61%] machAeroTutorials/images/overset_pointwise_cut_database.png copying images... [ 62%] machAeroTutorials/images/overset_pointwise_del_root.png copying images... [ 63%] machAeroTutorials/images/overset_pointwise_near_layer.png copying images... [ 64%] machAeroTutorials/images/overset_pointwise_near_wing1.png copying images... [ 65%] machAeroTutorials/images/overset_pointwise_near_close_TE.png copying images... [ 66%] machAeroTutorials/images/overset_pointwise_near_init.png copying images... [ 66%] machAeroTutorials/images/overset_pointwise_near_dimension_LETE.png copying images... [ 67%] machAeroTutorials/images/overset_pointwise_near_del_break_points.png copying images... [ 68%] machAeroTutorials/images/overset_pointwise_near_spacing.png copying images... [ 69%] machAeroTutorials/images/overset_pointwise_tip_clean_tip.png copying images... [ 70%] machAeroTutorials/images/overset_pointwise_tip_clean_root.png copying images... [ 71%] machAeroTutorials/images/overset_pointwise_tip_clean_LE_tip.png copying images... [ 72%] machAeroTutorials/images/overset_pointwise_tip_spacing.png copying images... [ 73%] machAeroTutorials/images/overset_pointwise_tip_split_le_con.png copying images... [ 73%] machAeroTutorials/images/overset_pointwise_tip_project.png copying images... [ 74%] machAeroTutorials/images/overset_pointwise_tip_mesh_LE_tip.png copying images... [ 75%] machAeroTutorials/images/overset_pointwise_tip_semi-circle.png copying images... [ 76%] machAeroTutorials/images/overset_pointwise_tip_solve.png copying images... [ 77%] machAeroTutorials/images/overset_pointwise_tip_examine.png copying images... [ 78%] machAeroTutorials/images/overset_pointwise_orient_near_tip.png copying images... [ 79%] machAeroTutorials/images/overset_pointwise_export_near_tip.png copying images... [ 80%] machAeroTutorials/images/overset_guide_3.jpg copying images... [ 80%] machAeroTutorials/images/overset_guide_4.jpg copying images... [ 81%] machAeroTutorials/images/overset_Overview.jpg copying images... [ 82%] machAeroTutorials/images/overset_IHC.png copying images... [ 83%] machAeroTutorials/images/overset_guide_8.jpg copying images... [ 84%] machAeroTutorials/images/cubeplot.jpg copying images... [ 85%] machAeroTutorials/images/overset_zipper.jpg copying images... [ 86%] machAeroTutorials/images/overset_guide_10.jpg copying images... [ 86%] machAeroTutorials/images/overset_guide_11.jpg copying images... [ 87%] machAeroTutorials/images/overset_tip1.png copying images... [ 88%] machAeroTutorials/images/overset_tip2.png copying images... [ 89%] machAeroTutorials/images/overset_guide_14.jpg copying images... [ 90%] machAeroTutorials/images/overset_guide_15.jpg copying images... [ 91%] machAeroTutorials/images/overset_bad_IHC.png copying images... [ 92%] machAeroTutorials/images/overset_orphan_debug.png copying images... [ 93%] machAeroTutorials/images/overset_view-of-ONERA.jpg copying images... [ 93%] machAeroTutorials/images/overset_vsp_overview.png copying images... [ 94%] machAeroTutorials/images/overset_vsp_add_wing.png copying images... [ 95%] machAeroTutorials/images/overset_vsp_half_wing.png copying images... [ 96%] machAeroTutorials/images/overset_vsp_wing_geo.png copying images... [ 97%] machAeroTutorials/images/overset_vsp_round_tip.png copying images... [ 98%] machAeroTutorials/images/overset_vsp_change_airfoil.png copying images... [ 99%] machAeroTutorials/images/overset_vsp_export.png copying images... [100%] machFramework/images/AeroOpt.png copying static files... done copying extra files... done dumping search index in English (code: en)... done dumping object inventory... done Updating searchtools for Read the Docs search... build succeeded, 6 warnings. The HTML pages are in _readthedocs/html. [rtd-command-info] start-time: 2023-03-15T22:32:40.993652Z, end-time: 2023-03-15T22:32:45.070711Z, duration: 4, exit-code: 0 python -m sphinx -T -E -b readthedocssinglehtmllocalmedia -d _build/doctrees -D language=en . $READTHEDOCS_OUTPUT/htmlzip Running Sphinx v5.3.0 making output directory... done checking bibtex cache... out of date parsing bibtex file /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/checkouts/latest/machFramework/references.bib... parsed 6 entries parsing bibtex file /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/checkouts/latest/machAeroTutorials/overset.bib... parsed 3 entries [autosummary] generating autosummary for: index.rst, installInstructions/dockerInstructions.rst, installInstructions/install3rdPartyPackages.rst, installInstructions/installFromScratch.rst, machAeroTutorials/aero_adflow.rst, machAeroTutorials/aero_cgnsutils.rst, machAeroTutorials/aero_gridRefinementStudy.rst, machAeroTutorials/aero_icem.rst, machAeroTutorials/aero_overview.rst, machAeroTutorials/aero_pygeo.rst, ..., machAeroTutorials/overset_analysis.rst, machAeroTutorials/overset_overview.rst, machAeroTutorials/overset_surface_mesh.rst, machAeroTutorials/overset_theory.rst, machAeroTutorials/overset_tips.rst, machAeroTutorials/overset_volume_mesh.rst, machAeroTutorials/overset_vsp.rst, machFramework/MACH-Aero.rst, machFramework/citeUs.rst, machFramework/contribute.rst loading intersphinx inventory from https://mdolab-pygeo.readthedocs-hosted.com/en/latest/objects.inv... loading intersphinx inventory from https://mdolab-pyoptsparse.readthedocs-hosted.com/en/latest/objects.inv... loading intersphinx inventory from https://mdolab-baseclasses.readthedocs-hosted.com/en/latest/objects.inv... loading intersphinx inventory from https://mdolab-idwarp.readthedocs-hosted.com/en/latest/objects.inv... loading intersphinx inventory from https://mdolab-adflow.readthedocs-hosted.com/en/latest/objects.inv... loading intersphinx inventory from https://mdolab-pyhyp.readthedocs-hosted.com/en/latest/objects.inv... loading intersphinx inventory from https://mdolab-multipoint.readthedocs-hosted.com/en/latest/objects.inv... loading intersphinx inventory from https://mdolab-pyspline.readthedocs-hosted.com/en/latest/objects.inv... building [mo]: targets for 0 po files that are out of date building [readthedocssinglehtmllocalmedia]: all documents updating environment: [new config] 32 added, 0 changed, 0 removed reading sources... [ 3%] index reading sources... [ 6%] installInstructions/dockerInstructions reading sources... [ 9%] installInstructions/install3rdPartyPackages reading sources... [ 12%] installInstructions/installFromScratch reading sources... [ 15%] machAeroTutorials/aero_adflow reading sources... [ 18%] machAeroTutorials/aero_cgnsutils reading sources... [ 21%] machAeroTutorials/aero_gridRefinementStudy reading sources... [ 25%] machAeroTutorials/aero_icem reading sources... [ 28%] machAeroTutorials/aero_overview reading sources... [ 31%] machAeroTutorials/aero_pygeo reading sources... [ 34%] machAeroTutorials/aero_pyhyp reading sources... [ 37%] machAeroTutorials/airfoilopt_ffd reading sources... [ 40%] machAeroTutorials/airfoilopt_mesh reading sources... [ 43%] machAeroTutorials/airfoilopt_multipoint reading sources... [ 46%] machAeroTutorials/airfoilopt_overview reading sources... [ 50%] machAeroTutorials/airfoilopt_singlepoint reading sources... [ 53%] machAeroTutorials/faq reading sources... [ 56%] machAeroTutorials/intro reading sources... [ 59%] machAeroTutorials/opt_aero reading sources... [ 62%] machAeroTutorials/opt_ffd reading sources... [ 65%] machAeroTutorials/opt_overview reading sources... [ 68%] machAeroTutorials/opt_pyopt reading sources... [ 71%] machAeroTutorials/overset_analysis reading sources... [ 75%] machAeroTutorials/overset_overview reading sources... [ 78%] machAeroTutorials/overset_surface_mesh reading sources... [ 81%] machAeroTutorials/overset_theory reading sources... [ 84%] machAeroTutorials/overset_tips reading sources... [ 87%] machAeroTutorials/overset_volume_mesh reading sources... [ 90%] machAeroTutorials/overset_vsp reading sources... [ 93%] machFramework/MACH-Aero reading sources... [ 96%] machFramework/citeUs reading sources... [100%] machFramework/contribute /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/checkouts/latest/machAeroTutorials/airfoilopt_ffd.rst:56: ERROR: Unexpected indentation. /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/checkouts/latest/machAeroTutorials/airfoilopt_ffd.rst:57: WARNING: Block quote ends without a blank line; unexpected unindent. looking for now-outdated files... none found pickling environment... done checking consistency... done preparing documents... done assembling single document... machFramework/MACH-Aero machFramework/citeUs machFramework/contribute installInstructions/dockerInstructions installInstructions/installFromScratch installInstructions/install3rdPartyPackages machAeroTutorials/intro machAeroTutorials/aero_overview machAeroTutorials/aero_pygeo machAeroTutorials/aero_icem machAeroTutorials/aero_pyhyp machAeroTutorials/aero_cgnsutils machAeroTutorials/aero_adflow machAeroTutorials/aero_gridRefinementStudy machAeroTutorials/opt_overview machAeroTutorials/opt_pyopt machAeroTutorials/opt_ffd machAeroTutorials/opt_aero machAeroTutorials/airfoilopt_overview machAeroTutorials/airfoilopt_mesh machAeroTutorials/airfoilopt_ffd machAeroTutorials/airfoilopt_singlepoint machAeroTutorials/airfoilopt_multipoint machAeroTutorials/overset_overview machAeroTutorials/overset_theory machAeroTutorials/overset_tips machAeroTutorials/overset_vsp machAeroTutorials/overset_surface_mesh machAeroTutorials/overset_volume_mesh machAeroTutorials/overset_analysis machAeroTutorials/faq /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/checkouts/latest/machAeroTutorials/opt_ffd.rst:207: WARNING: py:meth reference target not found: pygeo:pygeo.DVGeometry.extractCoef /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/checkouts/latest/machAeroTutorials/opt_ffd.rst:207: WARNING: py:meth reference target not found: pygeo:pygeo.DVGeometry.restoreCoef /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/checkouts/latest/machAeroTutorials/opt_aero.rst:114: WARNING: py:meth reference target not found: pygeo:pygeo.DVConstraints.setSurface /home/docs/checkouts/readthedocs.org/user_builds/mdolab-mach-aero/checkouts/latest/machAeroTutorials/overset_volume_mesh.rst:149: WARNING: py:meth reference target not found: pyhyp:pyhyp.utils.simpleOCart done writing... done writing additional files... done copying images... [ 0%] machFramework/images/AeroOpt.png copying images... [ 1%] machAeroTutorials/images/RAE2822.png copying images... [ 2%] machAeroTutorials/images/aero_wing_geometry.png copying images... [ 3%] machAeroTutorials/images/icem_AppearanceButtons.png copying images... [ 4%] machAeroTutorials/images/icem_ModelTree1.png copying images... [ 5%] machAeroTutorials/images/icem_CreatePart.png copying images... [ 6%] machAeroTutorials/images/icem_TabGeometry.png copying images... [ 6%] machAeroTutorials/images/icem_ModelTree2.png copying images... [ 7%] machAeroTutorials/images/icem_PointsCurveEnds.png copying images... [ 8%] machAeroTutorials/images/icem_CurveFromPoints.png copying images... [ 9%] machAeroTutorials/images/icem_TrailingEdgeCurves.png copying images... [ 10%] machAeroTutorials/images/icem_PointsParameter.png copying images... [ 11%] machAeroTutorials/images/icem_LeadingEdgeCurves.png copying images... [ 12%] machAeroTutorials/images/icem_TabBlocking.png copying images... [ 13%] machAeroTutorials/images/icem_CreateBlock.png copying images... [ 13%] machAeroTutorials/images/icem_Blocking3Dto2D.png copying images... [ 14%] machAeroTutorials/images/icem_ModelTree3.png copying images... [ 15%] machAeroTutorials/images/icem_DeleteBlock.png copying images... [ 16%] machAeroTutorials/images/icem_AssociateVertex.png copying images... [ 17%] machAeroTutorials/images/icem_AssociatedVertices.png copying images... [ 18%] machAeroTutorials/images/icem_EditEdge.png copying images... [ 19%] machAeroTutorials/images/icem_UpdatePreMesh.png copying images... [ 20%] machAeroTutorials/images/icem_BeforeMesh.png copying images... [ 20%] machAeroTutorials/images/icem_InitialTipParams.png copying images... [ 21%] machAeroTutorials/images/icem_BadMesh.png copying images... [ 22%] machAeroTutorials/images/icem_BadMeshQualityHisto.png copying images... [ 23%] machAeroTutorials/images/icem_SplitBlock.png copying images... [ 24%] machAeroTutorials/images/icem_SplitBlockHorizEdge.png copying images... [ 25%] machAeroTutorials/images/icem_BadMesh2.png copying images... [ 26%] machAeroTutorials/images/icem_Dissassociate.png copying images... [ 26%] machAeroTutorials/images/icem_SplitTips.png copying images... [ 27%] machAeroTutorials/images/icem_TipVertices.png copying images... [ 28%] machAeroTutorials/images/icem_BetterMesh.png copying images... [ 29%] machAeroTutorials/images/icem_BetterMeshQuality.png copying images... [ 30%] machAeroTutorials/images/icem_BlockOrientation.png copying images... [ 31%] machAeroTutorials/images/icem_SaveCGNS.png copying images... [ 32%] machAeroTutorials/images/aero_wing_volume_mesh.png copying images... [ 33%] machAeroTutorials/images/aero_wing_volume_mesh_coarsened.png copying images... [ 33%] machAeroTutorials/images/aero_wing_analysis_cp_contour.png copying images... [ 34%] machAeroTutorials/images/aero_wing_analysis_lift.png copying images... [ 35%] machAeroTutorials/images/aero_wing_analysis_slices.png copying images... [ 36%] machAeroTutorials/images/RAE2822_gridconvergence.png copying images... [ 37%] machAeroTutorials/images/meshexample.png copying images... [ 38%] machAeroTutorials/images/opt_optview.png copying images... [ 39%] machAeroTutorials/images/opt_optpath.png copying images... [ 40%] machAeroTutorials/images/ffd_demo.png copying images... [ 40%] machAeroTutorials/images/wing_in_ffd.png copying images... [ 41%] machAeroTutorials/images/ffd_refaxis.png copying images... [ 42%] machAeroTutorials/images/ffd_designvars.png copying images... [ 43%] machAeroTutorials/images/ffd_deformed_ffd.png copying images... [ 44%] machAeroTutorials/images/ffd_deformed_surf_coords.png copying images... [ 45%] machAeroTutorials/images/opt_thickness_and_vol_diagram.png copying images... [ 46%] machAeroTutorials/images/opt_constraints_dat.png copying images... [ 46%] machAeroTutorials/images/aero_wing_opt_cp_contour_compare.png copying images... [ 47%] machAeroTutorials/images/aero_wing_opt_lift_compare.png copying images... [ 48%] machAeroTutorials/images/aero_wing_opt_slices_compare.png copying images... [ 49%] machAeroTutorials/images/aero_wing_opt_hist.png copying images... [ 50%] machAeroTutorials/images/airfoil_surface_mesh.png copying images... [ 51%] machAeroTutorials/images/airfoil_p3d_mesh.png copying images... [ 52%] machAeroTutorials/images/airfoil_mesh.png copying images... [ 53%] machAeroTutorials/images/airfoil_mesh_zoom.png copying images... [ 53%] machAeroTutorials/images/airfoil_ffd.png copying images... [ 54%] machAeroTutorials/images/airfoil_ffd_side.png copying images... [ 55%] machAeroTutorials/images/airfoil_single_opt.png copying images... [ 56%] machAeroTutorials/images/airfoil_multi_opt.png copying images... [ 57%] machAeroTutorials/images/overset_guide_3.jpg copying images... [ 58%] machAeroTutorials/images/overset_guide_4.jpg copying images... [ 59%] machAeroTutorials/images/overset_Overview.jpg copying images... [ 60%] machAeroTutorials/images/overset_IHC.png copying images... [ 60%] machAeroTutorials/images/overset_guide_8.jpg copying images... [ 61%] machAeroTutorials/images/cubeplot.jpg copying images... [ 62%] machAeroTutorials/images/overset_zipper.jpg copying images... [ 63%] machAeroTutorials/images/overset_guide_10.jpg copying images... [ 64%] machAeroTutorials/images/overset_guide_11.jpg copying images... [ 65%] machAeroTutorials/images/overset_tip1.png copying images... [ 66%] machAeroTutorials/images/overset_tip2.png copying images... [ 66%] machAeroTutorials/images/overset_guide_14.jpg copying images... [ 67%] machAeroTutorials/images/overset_guide_15.jpg copying images... [ 68%] machAeroTutorials/images/overset_bad_IHC.png copying images... [ 69%] machAeroTutorials/images/overset_orphan_debug.png copying images... [ 70%] machAeroTutorials/images/overset_view-of-ONERA.jpg copying images... [ 71%] machAeroTutorials/images/overset_vsp_overview.png copying images... [ 72%] machAeroTutorials/images/overset_vsp_add_wing.png copying images... [ 73%] machAeroTutorials/images/overset_vsp_half_wing.png copying images... [ 73%] machAeroTutorials/images/overset_vsp_wing_geo.png copying images... [ 74%] machAeroTutorials/images/overset_vsp_round_tip.png copying images... [ 75%] machAeroTutorials/images/overset_vsp_change_airfoil.png copying images... [ 76%] machAeroTutorials/images/overset_vsp_export.png copying images... [ 77%] machAeroTutorials/images/overset_m6_mesh_fields.png copying images... [ 78%] machAeroTutorials/images/overset_pointwise_overview.png copying images... [ 79%] machAeroTutorials/images/overset_pointwise_after_import.png copying images... [ 80%] machAeroTutorials/images/overset_pointwise_dat1.png copying images... [ 80%] machAeroTutorials/images/overset_pointwise_cut_database.png copying images... [ 81%] machAeroTutorials/images/overset_pointwise_del_root.png copying images... [ 82%] machAeroTutorials/images/overset_pointwise_near_layer.png copying images... [ 83%] machAeroTutorials/images/overset_pointwise_near_wing1.png copying images... [ 84%] machAeroTutorials/images/overset_pointwise_near_close_TE.png copying images... [ 85%] machAeroTutorials/images/overset_pointwise_near_init.png copying images... [ 86%] machAeroTutorials/images/overset_pointwise_near_dimension_LETE.png copying images... [ 86%] machAeroTutorials/images/overset_pointwise_near_del_break_points.png copying images... [ 87%] machAeroTutorials/images/overset_pointwise_near_spacing.png copying images... [ 88%] machAeroTutorials/images/overset_pointwise_tip_clean_tip.png copying images... [ 89%] machAeroTutorials/images/overset_pointwise_tip_clean_root.png copying images... [ 90%] machAeroTutorials/images/overset_pointwise_tip_clean_LE_tip.png copying images... [ 91%] machAeroTutorials/images/overset_pointwise_tip_spacing.png copying images... [ 92%] machAeroTutorials/images/overset_pointwise_tip_split_le_con.png copying images... [ 93%] machAeroTutorials/images/overset_pointwise_tip_project.png copying images... [ 93%] machAeroTutorials/images/overset_pointwise_tip_mesh_LE_tip.png copying images... [ 94%] machAeroTutorials/images/overset_pointwise_tip_semi-circle.png copying images... [ 95%] machAeroTutorials/images/overset_pointwise_tip_solve.png copying images... [ 96%] machAeroTutorials/images/overset_pointwise_tip_examine.png copying images... [ 97%] machAeroTutorials/images/overset_pointwise_orient_near_tip.png copying images... [ 98%] machAeroTutorials/images/overset_pointwise_export_near_tip.png copying images... [ 99%] machAeroTutorials/images/overset_analysis_adflow_plot.png copying images... [100%] machAeroTutorials/images/overset_grid_convergence.png copying static files... done copying extra files... done dumping object inventory... done Updating searchtools for Read the Docs search... build succeeded, 6 warnings. The HTML page is in _readthedocs/htmlzip.