Read the Docs build information Build id: 1196569 Project: openhw-group-core-v-mcu Version: latest Commit: f1da7904d5be4d54c5258d69059c7988a7e74586 Date: 2022-11-25T17:59:41.325969Z State: finished Success: True [rtd-command-info] start-time: 2022-11-25T17:59:43.164485Z, end-time: 2022-11-25T17:59:45.701080Z, duration: 2, exit-code: 0 git clone --no-single-branch --depth 50 https://github.com/openhwgroup/core-v-mcu.git . Cloning into '.'... [rtd-command-info] start-time: 2022-11-25T17:59:45.933543Z, end-time: 2022-11-25T17:59:46.294958Z, duration: 0, exit-code: 0 git checkout --force origin/master Note: switching to 'origin/master'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at f1da790 Table formatting broken [rtd-command-info] start-time: 2022-11-25T17:59:46.533121Z, end-time: 2022-11-25T17:59:46.605278Z, duration: 0, exit-code: 0 git clean -d -f -f [rtd-command-info] start-time: 2022-11-25T17:59:47.660304Z, end-time: 2022-11-25T17:59:52.397534Z, duration: 4, exit-code: 0 python3.8 -mvirtualenv Using base prefix '/home/docs/.pyenv/versions/3.8.6' New python executable in /home/docs/checkouts/readthedocs.org/user_builds/openhw-group-core-v-mcu/envs/latest/bin/python3.8 Also creating executable in /home/docs/checkouts/readthedocs.org/user_builds/openhw-group-core-v-mcu/envs/latest/bin/python Installing setuptools, pip, wheel... done. [rtd-command-info] start-time: 2022-11-25T17:59:52.579816Z, end-time: 2022-11-25T17:59:54.325999Z, duration: 1, exit-code: 0 python -m pip install --upgrade --no-cache-dir pip setuptools<58.3.0 Requirement already satisfied: pip in /home/docs/checkouts/readthedocs.org/user_builds/openhw-group-core-v-mcu/envs/latest/lib/python3.8/site-packages (22.3.1) Collecting setuptools<58.3.0 Downloading setuptools-58.2.0-py3-none-any.whl (946 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 946.1/946.1 kB 29.9 MB/s eta 0:00:00 Installing collected packages: setuptools Attempting uninstall: setuptools Found existing installation: setuptools 65.6.3 Uninstalling setuptools-65.6.3: Successfully uninstalled setuptools-65.6.3 Successfully installed setuptools-58.2.0 [rtd-command-info] start-time: 2022-11-25T17:59:54.563844Z, end-time: 2022-11-25T18:00:01.768322Z, duration: 7, exit-code: 0 python -m pip install --upgrade --no-cache-dir pillow mock==1.0.1 alabaster>=0.7,<0.8,!=0.7.5 commonmark==0.9.1 recommonmark==0.5.0 sphinx sphinx-rtd-theme readthedocs-sphinx-ext<2.3 Collecting pillow Downloading Pillow-9.3.0-cp38-cp38-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (3.2 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.2/3.2 MB 57.2 MB/s eta 0:00:00 Collecting mock==1.0.1 Downloading mock-1.0.1.zip (861 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 861.9/861.9 kB 272.4 MB/s eta 0:00:00 Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting alabaster!=0.7.5,<0.8,>=0.7 Downloading alabaster-0.7.12-py2.py3-none-any.whl (14 kB) Collecting commonmark==0.9.1 Downloading commonmark-0.9.1-py2.py3-none-any.whl (51 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 51.1/51.1 kB 197.3 MB/s eta 0:00:00 Collecting recommonmark==0.5.0 Downloading recommonmark-0.5.0-py2.py3-none-any.whl (9.8 kB) Collecting sphinx Downloading sphinx-5.3.0-py3-none-any.whl (3.2 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.2/3.2 MB 187.9 MB/s eta 0:00:00 Collecting sphinx-rtd-theme Downloading sphinx_rtd_theme-1.1.1-py2.py3-none-any.whl (2.8 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.8/2.8 MB 182.6 MB/s eta 0:00:00 Collecting readthedocs-sphinx-ext<2.3 Downloading readthedocs_sphinx_ext-2.2.0-py2.py3-none-any.whl (11 kB) Collecting docutils>=0.11 Downloading docutils-0.19-py3-none-any.whl (570 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 570.5/570.5 kB 268.6 MB/s eta 0:00:00 Collecting requests>=2.5.0 Downloading requests-2.28.1-py3-none-any.whl (62 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 62.8/62.8 kB 214.9 MB/s eta 0:00:00 Collecting sphinxcontrib-devhelp Downloading sphinxcontrib_devhelp-1.0.2-py2.py3-none-any.whl (84 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 84.7/84.7 kB 232.5 MB/s eta 0:00:00 Collecting importlib-metadata>=4.8 Downloading importlib_metadata-5.1.0-py3-none-any.whl (21 kB) Collecting imagesize>=1.3 Downloading imagesize-1.4.1-py2.py3-none-any.whl (8.8 kB) Collecting sphinxcontrib-htmlhelp>=2.0.0 Downloading sphinxcontrib_htmlhelp-2.0.0-py2.py3-none-any.whl (100 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 100.5/100.5 kB 227.1 MB/s eta 0:00:00 Collecting Jinja2>=3.0 Downloading Jinja2-3.1.2-py3-none-any.whl (133 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 133.1/133.1 kB 259.3 MB/s eta 0:00:00 Collecting sphinxcontrib-applehelp Downloading sphinxcontrib_applehelp-1.0.2-py2.py3-none-any.whl (121 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 121.2/121.2 kB 252.6 MB/s eta 0:00:00 Collecting sphinxcontrib-serializinghtml>=1.1.5 Downloading sphinxcontrib_serializinghtml-1.1.5-py2.py3-none-any.whl (94 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 94.0/94.0 kB 227.1 MB/s eta 0:00:00 Collecting sphinxcontrib-qthelp Downloading sphinxcontrib_qthelp-1.0.3-py2.py3-none-any.whl (90 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 90.6/90.6 kB 245.8 MB/s eta 0:00:00 Collecting sphinxcontrib-jsmath Downloading sphinxcontrib_jsmath-1.0.1-py2.py3-none-any.whl (5.1 kB) Collecting packaging>=21.0 Downloading packaging-21.3-py3-none-any.whl (40 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 40.8/40.8 kB 205.3 MB/s eta 0:00:00 Collecting Pygments>=2.12 Downloading Pygments-2.13.0-py3-none-any.whl (1.1 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.1/1.1 MB 276.7 MB/s eta 0:00:00 Collecting snowballstemmer>=2.0 Downloading snowballstemmer-2.2.0-py2.py3-none-any.whl (93 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 93.0/93.0 kB 243.1 MB/s eta 0:00:00 Collecting babel>=2.9 Downloading Babel-2.11.0-py3-none-any.whl (9.5 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 9.5/9.5 MB 180.5 MB/s eta 0:00:00 Collecting docutils>=0.11 Downloading docutils-0.17.1-py2.py3-none-any.whl (575 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 575.5/575.5 kB 282.2 MB/s eta 0:00:00 Collecting pytz>=2015.7 Downloading pytz-2022.6-py2.py3-none-any.whl (498 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 498.1/498.1 kB 269.8 MB/s eta 0:00:00 Collecting zipp>=0.5 Downloading zipp-3.10.0-py3-none-any.whl (6.2 kB) Collecting MarkupSafe>=2.0 Downloading MarkupSafe-2.1.1-cp38-cp38-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (25 kB) Collecting pyparsing!=3.0.5,>=2.0.2 Downloading pyparsing-3.0.9-py3-none-any.whl (98 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 98.3/98.3 kB 231.3 MB/s eta 0:00:00 Collecting certifi>=2017.4.17 Downloading certifi-2022.9.24-py3-none-any.whl (161 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 161.1/161.1 kB 256.6 MB/s eta 0:00:00 Collecting idna<4,>=2.5 Downloading idna-3.4-py3-none-any.whl (61 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 61.5/61.5 kB 217.8 MB/s eta 0:00:00 Collecting charset-normalizer<3,>=2 Downloading charset_normalizer-2.1.1-py3-none-any.whl (39 kB) Collecting urllib3<1.27,>=1.21.1 Downloading urllib3-1.26.13-py2.py3-none-any.whl (140 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 140.6/140.6 kB 260.6 MB/s eta 0:00:00 Building wheels for collected packages: mock Building wheel for mock (setup.py): started Building wheel for mock (setup.py): finished with status 'done' Created wheel for mock: filename=mock-1.0.1-py3-none-any.whl size=23772 sha256=d6147e46ae5060b4d060116b3162a69d666c41d4a175baccdb37bb531e233ae1 Stored in directory: /tmp/pip-ephem-wheel-cache-95i_i024/wheels/17/19/d4/cf0d726b5d1c635d98e82c451a566e84870a10373f29ce6517 Successfully built mock Installing collected packages: snowballstemmer, pytz, mock, commonmark, alabaster, zipp, urllib3, sphinxcontrib-serializinghtml, sphinxcontrib-qthelp, sphinxcontrib-jsmath, sphinxcontrib-htmlhelp, sphinxcontrib-devhelp, sphinxcontrib-applehelp, pyparsing, Pygments, pillow, MarkupSafe, imagesize, idna, docutils, charset-normalizer, certifi, babel, requests, packaging, Jinja2, importlib-metadata, sphinx, readthedocs-sphinx-ext, sphinx-rtd-theme, recommonmark Successfully installed Jinja2-3.1.2 MarkupSafe-2.1.1 Pygments-2.13.0 alabaster-0.7.12 babel-2.11.0 certifi-2022.9.24 charset-normalizer-2.1.1 commonmark-0.9.1 docutils-0.17.1 idna-3.4 imagesize-1.4.1 importlib-metadata-5.1.0 mock-1.0.1 packaging-21.3 pillow-9.3.0 pyparsing-3.0.9 pytz-2022.6 readthedocs-sphinx-ext-2.2.0 recommonmark-0.5.0 requests-2.28.1 snowballstemmer-2.2.0 sphinx-5.3.0 sphinx-rtd-theme-1.1.1 sphinxcontrib-applehelp-1.0.2 sphinxcontrib-devhelp-1.0.2 sphinxcontrib-htmlhelp-2.0.0 sphinxcontrib-jsmath-1.0.1 sphinxcontrib-qthelp-1.0.3 sphinxcontrib-serializinghtml-1.1.5 urllib3-1.26.13 zipp-3.10.0 [rtd-command-info] start-time: 2022-11-25T18:00:01.975852Z, end-time: 2022-11-25T18:00:03.223901Z, duration: 1, exit-code: 0 python -m pip install --exists-action=w --no-cache-dir -r docs/requirements.txt Requirement already satisfied: recommonmark in /home/docs/checkouts/readthedocs.org/user_builds/openhw-group-core-v-mcu/envs/latest/lib/python3.8/site-packages (from -r docs/requirements.txt (line 5)) (0.5.0) Requirement already satisfied: sphinx in /home/docs/checkouts/readthedocs.org/user_builds/openhw-group-core-v-mcu/envs/latest/lib/python3.8/site-packages (from -r docs/requirements.txt (line 6)) (5.3.0) Collecting sphinx_markdown_tables Downloading sphinx_markdown_tables-0.0.17-py3-none-any.whl (28 kB) Requirement already satisfied: sphinx_rtd_theme in /home/docs/checkouts/readthedocs.org/user_builds/openhw-group-core-v-mcu/envs/latest/lib/python3.8/site-packages (from -r docs/requirements.txt (line 8)) (1.1.1) Requirement already satisfied: docutils>=0.11 in /home/docs/checkouts/readthedocs.org/user_builds/openhw-group-core-v-mcu/envs/latest/lib/python3.8/site-packages (from recommonmark->-r docs/requirements.txt (line 5)) (0.17.1) Requirement already satisfied: commonmark>=0.7.3 in /home/docs/checkouts/readthedocs.org/user_builds/openhw-group-core-v-mcu/envs/latest/lib/python3.8/site-packages (from recommonmark->-r docs/requirements.txt (line 5)) (0.9.1) Requirement already satisfied: sphinxcontrib-jsmath in /home/docs/checkouts/readthedocs.org/user_builds/openhw-group-core-v-mcu/envs/latest/lib/python3.8/site-packages (from sphinx->-r docs/requirements.txt (line 6)) (1.0.1) Requirement already satisfied: sphinxcontrib-serializinghtml>=1.1.5 in /home/docs/checkouts/readthedocs.org/user_builds/openhw-group-core-v-mcu/envs/latest/lib/python3.8/site-packages (from sphinx->-r docs/requirements.txt (line 6)) (1.1.5) Requirement already satisfied: alabaster<0.8,>=0.7 in /home/docs/checkouts/readthedocs.org/user_builds/openhw-group-core-v-mcu/envs/latest/lib/python3.8/site-packages (from sphinx->-r docs/requirements.txt (line 6)) (0.7.12) Requirement already satisfied: importlib-metadata>=4.8 in /home/docs/checkouts/readthedocs.org/user_builds/openhw-group-core-v-mcu/envs/latest/lib/python3.8/site-packages (from sphinx->-r docs/requirements.txt (line 6)) (5.1.0) Requirement already satisfied: requests>=2.5.0 in /home/docs/checkouts/readthedocs.org/user_builds/openhw-group-core-v-mcu/envs/latest/lib/python3.8/site-packages (from sphinx->-r docs/requirements.txt (line 6)) (2.28.1) Requirement already satisfied: snowballstemmer>=2.0 in /home/docs/checkouts/readthedocs.org/user_builds/openhw-group-core-v-mcu/envs/latest/lib/python3.8/site-packages (from sphinx->-r docs/requirements.txt (line 6)) (2.2.0) Requirement already satisfied: babel>=2.9 in /home/docs/checkouts/readthedocs.org/user_builds/openhw-group-core-v-mcu/envs/latest/lib/python3.8/site-packages (from sphinx->-r docs/requirements.txt (line 6)) (2.11.0) Requirement already satisfied: sphinxcontrib-htmlhelp>=2.0.0 in /home/docs/checkouts/readthedocs.org/user_builds/openhw-group-core-v-mcu/envs/latest/lib/python3.8/site-packages (from sphinx->-r docs/requirements.txt (line 6)) (2.0.0) Requirement already satisfied: Pygments>=2.12 in /home/docs/checkouts/readthedocs.org/user_builds/openhw-group-core-v-mcu/envs/latest/lib/python3.8/site-packages (from sphinx->-r docs/requirements.txt (line 6)) (2.13.0) Requirement already satisfied: packaging>=21.0 in /home/docs/checkouts/readthedocs.org/user_builds/openhw-group-core-v-mcu/envs/latest/lib/python3.8/site-packages (from sphinx->-r docs/requirements.txt (line 6)) (21.3) Requirement already satisfied: Jinja2>=3.0 in /home/docs/checkouts/readthedocs.org/user_builds/openhw-group-core-v-mcu/envs/latest/lib/python3.8/site-packages (from sphinx->-r docs/requirements.txt (line 6)) (3.1.2) Requirement already satisfied: sphinxcontrib-qthelp in /home/docs/checkouts/readthedocs.org/user_builds/openhw-group-core-v-mcu/envs/latest/lib/python3.8/site-packages (from sphinx->-r docs/requirements.txt (line 6)) (1.0.3) Requirement already satisfied: sphinxcontrib-devhelp in /home/docs/checkouts/readthedocs.org/user_builds/openhw-group-core-v-mcu/envs/latest/lib/python3.8/site-packages (from sphinx->-r docs/requirements.txt (line 6)) (1.0.2) Requirement already satisfied: sphinxcontrib-applehelp in /home/docs/checkouts/readthedocs.org/user_builds/openhw-group-core-v-mcu/envs/latest/lib/python3.8/site-packages (from sphinx->-r docs/requirements.txt (line 6)) (1.0.2) Requirement already satisfied: imagesize>=1.3 in /home/docs/checkouts/readthedocs.org/user_builds/openhw-group-core-v-mcu/envs/latest/lib/python3.8/site-packages (from sphinx->-r docs/requirements.txt (line 6)) (1.4.1) Collecting markdown>=3.4 Downloading Markdown-3.4.1-py3-none-any.whl (93 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 93.3/93.3 kB 9.6 MB/s eta 0:00:00 Requirement already satisfied: pytz>=2015.7 in /home/docs/checkouts/readthedocs.org/user_builds/openhw-group-core-v-mcu/envs/latest/lib/python3.8/site-packages (from babel>=2.9->sphinx->-r docs/requirements.txt (line 6)) (2022.6) Requirement already satisfied: zipp>=0.5 in /home/docs/checkouts/readthedocs.org/user_builds/openhw-group-core-v-mcu/envs/latest/lib/python3.8/site-packages (from importlib-metadata>=4.8->sphinx->-r docs/requirements.txt (line 6)) (3.10.0) Requirement already satisfied: MarkupSafe>=2.0 in /home/docs/checkouts/readthedocs.org/user_builds/openhw-group-core-v-mcu/envs/latest/lib/python3.8/site-packages (from Jinja2>=3.0->sphinx->-r docs/requirements.txt (line 6)) (2.1.1) Requirement already satisfied: pyparsing!=3.0.5,>=2.0.2 in /home/docs/checkouts/readthedocs.org/user_builds/openhw-group-core-v-mcu/envs/latest/lib/python3.8/site-packages (from packaging>=21.0->sphinx->-r docs/requirements.txt (line 6)) (3.0.9) Requirement already satisfied: certifi>=2017.4.17 in /home/docs/checkouts/readthedocs.org/user_builds/openhw-group-core-v-mcu/envs/latest/lib/python3.8/site-packages (from requests>=2.5.0->sphinx->-r docs/requirements.txt (line 6)) (2022.9.24) Requirement already satisfied: charset-normalizer<3,>=2 in /home/docs/checkouts/readthedocs.org/user_builds/openhw-group-core-v-mcu/envs/latest/lib/python3.8/site-packages (from requests>=2.5.0->sphinx->-r docs/requirements.txt (line 6)) (2.1.1) Requirement already satisfied: idna<4,>=2.5 in /home/docs/checkouts/readthedocs.org/user_builds/openhw-group-core-v-mcu/envs/latest/lib/python3.8/site-packages (from requests>=2.5.0->sphinx->-r docs/requirements.txt (line 6)) (3.4) Requirement already satisfied: urllib3<1.27,>=1.21.1 in /home/docs/checkouts/readthedocs.org/user_builds/openhw-group-core-v-mcu/envs/latest/lib/python3.8/site-packages (from requests>=2.5.0->sphinx->-r docs/requirements.txt (line 6)) (1.26.13) Installing collected packages: markdown, sphinx_markdown_tables Successfully installed markdown-3.4.1 sphinx_markdown_tables-0.0.17 [rtd-command-info] start-time: 2022-11-25T18:00:04.751350Z, end-time: 2022-11-25T18:00:04.822691Z, duration: 0, exit-code: 0 cat docs/conf.py # Configuration file for the Sphinx documentation builder. # # This file only contains a selection of the most common options. For a full # list see the documentation: # https://www.sphinx-doc.org/en/master/usage/configuration.html # -- Path setup -------------------------------------------------------------- # If extensions (or modules to document with autodoc) are in another directory, # add these directories to sys.path here. If the directory is relative to the # documentation root, use os.path.abspath to make it absolute, like shown here. # # import os # import sys # sys.path.insert(0, os.path.abspath('.')) # -- Project information ----------------------------------------------------- project = 'CORE-V MCU' copyright = '2022-present, OpenHW Group' author = 'OpenHW Group Contributors' # -- General configuration --------------------------------------------------- # Add any Sphinx extension module names here, as strings. They can be # extensions coming with Sphinx (named 'sphinx.ext.*') or your custom # ones. extensions = [ 'recommonmark', 'sphinx_markdown_tables', ] # Add any paths that contain templates here, relative to this directory. templates_path = ['_templates'] # List of patterns, relative to source directory, that match files and # directories to ignore when looking for source files. # This pattern also affects html_static_path and html_extra_path. exclude_patterns = ['_build', 'Thumbs.db', '.DS_Store', 'README.md'] # -- Options for HTML output ------------------------------------------------- # The theme to use for HTML and HTML Help pages. See the documentation for # a list of builtin themes. # html_theme = 'sphinx_rtd_theme' # Theme options are theme-specific and customize the look and feel of a theme # further. For a list of options available for each theme, see the # documentation. # html_theme_options = {'style_nav_header_background': '#DDDDDD'} html_logo = '_static/openhw-landscape.svg' # Add any paths that contain custom static files (such as style sheets) here, # relative to this directory. They are copied after the builtin static files, # so a file named "default.css" will overwrite the builtin "default.css". #html_static_path = ['ystatic'] # Set html_static_path to null on the advice of RTDs: html_static_path = [] # Custom sidebar templates, must be a dictionary that maps document names # to template names. # # The default sidebars (for documents that don't match any pattern) are # defined by theme itself. Builtin themes are using these templates by # default: ``['localtoc.html', 'relations.html', 'sourcelink.html', # 'searchbox.html']``. # # html_sidebars = {} ########################################################################### # auto-created readthedocs.org specific configuration # ########################################################################### # # The following code was added during an automated build on readthedocs.org # It is auto created and injected for every build. The result is based on the # conf.py.tmpl file found in the readthedocs.org codebase: # https://github.com/rtfd/readthedocs.org/blob/main/readthedocs/doc_builder/templates/doc_builder/conf.py.tmpl # # Note: this file shouldn't rely on extra dependencies. import importlib import sys import os.path # Borrowed from six. PY3 = sys.version_info[0] == 3 string_types = str if PY3 else basestring from sphinx import version_info # Get suffix for proper linking to GitHub # This is deprecated in Sphinx 1.3+, # as each page can have its own suffix if globals().get('source_suffix', False): if isinstance(source_suffix, string_types): SUFFIX = source_suffix elif isinstance(source_suffix, (list, tuple)): # Sphinx >= 1.3 supports list/tuple to define multiple suffixes SUFFIX = source_suffix[0] elif isinstance(source_suffix, dict): # Sphinx >= 1.8 supports a mapping dictionary for multiple suffixes SUFFIX = list(source_suffix.keys())[0] # make a ``list()`` for py2/py3 compatibility else: # default to .rst SUFFIX = '.rst' else: SUFFIX = '.rst' # Add RTD Static Path. Add to the end because it overwrites previous files. if not 'html_static_path' in globals(): html_static_path = [] if os.path.exists('_static'): html_static_path.append('_static') # Add RTD Theme only if they aren't overriding it already using_rtd_theme = ( ( 'html_theme' in globals() and html_theme in ['default'] and # Allow people to bail with a hack of having an html_style 'html_style' not in globals() ) or 'html_theme' not in globals() ) if using_rtd_theme: theme = importlib.import_module('sphinx_rtd_theme') html_theme = 'sphinx_rtd_theme' html_style = None html_theme_options = {} if 'html_theme_path' in globals(): html_theme_path.append(theme.get_html_theme_path()) else: html_theme_path = [theme.get_html_theme_path()] if globals().get('websupport2_base_url', False): websupport2_base_url = 'https://readthedocs.com/websupport' websupport2_static_url = 'https://assets.readthedocs.com/' #Add project information to the template context. context = { 'using_theme': using_rtd_theme, 'html_theme': html_theme, 'current_version': "latest", 'version_slug': "latest", 'MEDIA_URL': "https://media.readthedocs.com/media/", 'STATIC_URL': "https://assets.readthedocs.com/", 'PRODUCTION_DOMAIN': "readthedocs.com", 'proxied_static_path': "/_/static/", 'versions': [ ("latest", "/en/latest/"), ], 'downloads': [ ], 'subprojects': [ ], 'slug': 'openhw-group-core-v-mcu', 'name': u'core-v-mcu', 'rtd_language': u'en', 'programming_language': u'words', 'canonical_url': 'https://docs.openhwgroup.org/projects/core-v-mcu/', 'analytics_code': 'None', 'single_version': False, 'conf_py_path': '/docs/', 'api_host': 'https://readthedocs.com', 'github_user': 'openhwgroup', 'proxied_api_host': '/_', 'github_repo': 'core-v-mcu', 'github_version': 'master', 'display_github': True, 'bitbucket_user': 'None', 'bitbucket_repo': 'None', 'bitbucket_version': 'master', 'display_bitbucket': False, 'gitlab_user': 'None', 'gitlab_repo': 'None', 'gitlab_version': 'master', 'display_gitlab': False, 'READTHEDOCS': True, 'using_theme': (html_theme == "default"), 'new_theme': (html_theme == "sphinx_rtd_theme"), 'source_suffix': SUFFIX, 'ad_free': False, 'docsearch_disabled': False, 'user_analytics_code': '', 'global_analytics_code': 'UA-17997319-2', 'commit': 'f1da7904', } # For sphinx >=1.8 we can use html_baseurl to set the canonical URL. # https://www.sphinx-doc.org/en/master/usage/configuration.html#confval-html_baseurl if version_info >= (1, 8): if not globals().get('html_baseurl'): html_baseurl = context['canonical_url'] context['canonical_url'] = None if 'html_context' in globals(): html_context.update(context) else: html_context = context # Add custom RTD extension if 'extensions' in globals(): # Insert at the beginning because it can interfere # with other extensions. # See https://github.com/rtfd/readthedocs.org/pull/4054 extensions.insert(0, "readthedocs_ext.readthedocs") else: extensions = ["readthedocs_ext.readthedocs"] # Add External version warning banner to the external version documentation if 'branch' == 'external': extensions.insert(1, "readthedocs_ext.external_version_warning") readthedocs_vcs_url = 'None' readthedocs_build_url = 'https://readthedocs.com/projects/openhw-group-core-v-mcu/builds/1196569/' project_language = 'en' # User's Sphinx configurations language_user = globals().get('language', None) latex_engine_user = globals().get('latex_engine', None) latex_elements_user = globals().get('latex_elements', None) # Remove this once xindy gets installed in Docker image and XINDYOPS # env variable is supported # https://github.com/rtfd/readthedocs-docker-images/pull/98 latex_use_xindy = False chinese = any([ language_user in ('zh_CN', 'zh_TW'), project_language in ('zh_CN', 'zh_TW'), ]) japanese = any([ language_user == 'ja', project_language == 'ja', ]) if chinese: latex_engine = latex_engine_user or 'xelatex' latex_elements_rtd = { 'preamble': '\\usepackage[UTF8]{ctex}\n', } latex_elements = latex_elements_user or latex_elements_rtd elif japanese: latex_engine = latex_engine_user or 'platex' # Make sure our build directory is always excluded exclude_patterns = globals().get('exclude_patterns', []) exclude_patterns.extend(['_build']) [rtd-command-info] start-time: 2022-11-25T18:00:05.036300Z, end-time: 2022-11-25T18:00:08.257366Z, duration: 3, exit-code: 0 python -m sphinx -T -E -b html -d _build/doctrees -D language=en . _build/html Running Sphinx v5.3.0 making output directory... done building [mo]: targets for 0 po files that are out of date building [html]: targets for 44 source files that are out of date updating environment: [new config] 44 added, 0 changed, 0 removed reading sources... [ 2%] doc-src/apb2apbcomp reading sources... [ 4%] doc-src/apb2per reading sources... [ 6%] doc-src/apb_adv_timer reading sources... [ 9%] doc-src/apb_fll_if reading sources... [ 11%] doc-src/apb_gpio reading sources... [ 13%] doc-src/apb_timer reading sources... [ 15%] doc-src/appendixA_terminology reading sources... [ 18%] doc-src/cam reading sources... [ 20%] doc-src/clock_domains reading sources... [ 22%] doc-src/csr-docs/apb_event_cntrl_reg_defs reading sources... [ 25%] doc-src/csr-docs/apb_gpio_reg_defs reading sources... [ 27%] doc-src/csr-docs/apb_i2cs_reg_defs reading sources... [ 29%] doc-src/csr-docs/apb_soc_ctrl_reg_defs reading sources... [ 31%] doc-src/csr-docs/apb_timer_unit_reg_defs reading sources... [ 34%] doc-src/csr-docs/efpga_template_reg_defs reading sources... [ 36%] doc-src/csr-docs/udma_camera_reg_defs reading sources... [ 38%] doc-src/csr-docs/udma_ctrl_reg_defs reading sources... [ 40%] doc-src/csr-docs/udma_i2cm_reg_defs reading sources... [ 43%] doc-src/csr-docs/udma_qspi_reg_defs reading sources... [ 45%] doc-src/csr-docs/udma_sdio_reg_defs reading sources... [ 47%] doc-src/csr-docs/udma_uart_reg_defs reading sources... [ 50%] doc-src/cv32e40p_subsystem reading sources... [ 52%] doc-src/debug_approach reading sources... [ 54%] doc-src/device_characteristics reading sources... [ 56%] doc-src/efpga_subsystem reading sources... [ 59%] doc-src/evaluation_kits reading sources... [ 61%] doc-src/github reading sources... [ 63%] doc-src/high_level_architecture reading sources... [ 65%] doc-src/i2cm reading sources... [ 68%] doc-src/i2cs reading sources... [ 70%] doc-src/interrupts reading sources... [ 72%] doc-src/logarithmic_interconnect reading sources... [ 75%] doc-src/mmap reading sources... [ 77%] doc-src/overview reading sources... [ 79%] doc-src/package_information reading sources... [ 81%] doc-src/pin-table reading sources... [ 84%] doc-src/qspim reading sources... [ 86%] doc-src/sdio reading sources... [ 88%] doc-src/software_support reading sources... [ 90%] doc-src/startup reading sources... [ 93%] doc-src/system_control_peripherals reading sources... [ 95%] doc-src/uart reading sources... [ 97%] doc-src/udma reading sources... [100%] index looking for now-outdated files... none found pickling environment... done checking consistency... done preparing documents... done writing output... [ 2%] doc-src/apb2apbcomp writing output... [ 4%] doc-src/apb2per writing output... [ 6%] doc-src/apb_adv_timer writing output... [ 9%] doc-src/apb_fll_if writing output... [ 11%] doc-src/apb_gpio writing output... [ 13%] doc-src/apb_timer writing output... [ 15%] doc-src/appendixA_terminology writing output... [ 18%] doc-src/cam writing output... [ 20%] doc-src/clock_domains writing output... [ 22%] doc-src/csr-docs/apb_event_cntrl_reg_defs writing output... [ 25%] doc-src/csr-docs/apb_gpio_reg_defs writing output... [ 27%] doc-src/csr-docs/apb_i2cs_reg_defs writing output... [ 29%] doc-src/csr-docs/apb_soc_ctrl_reg_defs writing output... [ 31%] doc-src/csr-docs/apb_timer_unit_reg_defs writing output... [ 34%] doc-src/csr-docs/efpga_template_reg_defs writing output... [ 36%] doc-src/csr-docs/udma_camera_reg_defs writing output... [ 38%] doc-src/csr-docs/udma_ctrl_reg_defs writing output... [ 40%] doc-src/csr-docs/udma_i2cm_reg_defs writing output... [ 43%] doc-src/csr-docs/udma_qspi_reg_defs writing output... [ 45%] doc-src/csr-docs/udma_sdio_reg_defs writing output... [ 47%] doc-src/csr-docs/udma_uart_reg_defs writing output... [ 50%] doc-src/cv32e40p_subsystem writing output... [ 52%] doc-src/debug_approach writing output... [ 54%] doc-src/device_characteristics writing output... [ 56%] doc-src/efpga_subsystem writing output... [ 59%] doc-src/evaluation_kits writing output... [ 61%] doc-src/github writing output... [ 63%] doc-src/high_level_architecture writing output... [ 65%] doc-src/i2cm writing output... [ 68%] doc-src/i2cs writing output... [ 70%] doc-src/interrupts writing output... [ 72%] doc-src/logarithmic_interconnect writing output... [ 75%] doc-src/mmap writing output... [ 77%] doc-src/overview writing output... [ 79%] doc-src/package_information writing output... [ 81%] doc-src/pin-table writing output... [ 84%] doc-src/qspim writing output... [ 86%] doc-src/sdio writing output... [ 88%] doc-src/software_support writing output... [ 90%] doc-src/startup writing output... [ 93%] doc-src/system_control_peripherals writing output... [ 95%] doc-src/uart writing output... [ 97%] doc-src/udma writing output... [100%] index generating indices... genindex done writing additional pages... search done copying images... [100%] images/CORE-V-MCU_Block_Diagram.png copying static files... done copying extra files... done dumping search index in English (code: en)... done dumping object inventory... done Updating searchtools for Read the Docs search... build succeeded. The HTML pages are in _build/html. /home/docs/checkouts/readthedocs.org/user_builds/openhw-group-core-v-mcu/envs/latest/lib/python3.8/site-packages/recommonmark/parser.py:65: UserWarning: Container node skipped: type=document warn("Container node skipped: type={0}".format(mdnode.t))