Read the Docs build information Build id: 1196345 Project: cloudferro-waw3-1-kubernetes-test Version: latest Commit: 0b7613db8be54891754dd15db755a359bad6fa85 Date: 2022-11-25T15:05:10.632552Z State: finished Success: False [rtd-command-info] start-time: 2022-11-25T15:06:16.163741Z, end-time: 2022-11-25T15:06:21.083903Z, duration: 4, exit-code: 0 git clone --no-single-branch --depth 50 git@github.com:CloudFerro/waw3-1-kubernetes-test.git . Cloning into '.'... Warning: Permanently added 'github.com,192.30.255.113' (ECDSA) to the list of known hosts. [rtd-command-info] start-time: 2022-11-25T15:06:21.386311Z, end-time: 2022-11-25T15:06:21.485252Z, duration: 0, exit-code: 0 git checkout --force origin/main Note: switching to 'origin/main'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 0b7613d All [rtd-command-info] start-time: 2022-11-25T15:06:21.683920Z, end-time: 2022-11-25T15:06:21.757525Z, duration: 0, exit-code: 0 git clean -d -f -f [rtd-command-info] start-time: 2022-11-25T15:06:23.156887Z, end-time: 2022-11-25T15:06:44.384867Z, duration: 21, exit-code: 0 python3.7 -mvirtualenv Using base prefix '/home/docs/.pyenv/versions/3.7.9' New python executable in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/bin/python3.7 Also creating executable in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/bin/python Installing setuptools, pip, wheel... done. [rtd-command-info] start-time: 2022-11-25T15:06:44.591772Z, end-time: 2022-11-25T15:06:46.772313Z, duration: 2, exit-code: 0 python -m pip install --upgrade --no-cache-dir pip setuptools<58.3.0 Requirement already satisfied: pip in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (22.3.1) Collecting setuptools<58.3.0 Downloading setuptools-58.2.0-py3-none-any.whl (946 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 946.1/946.1 kB 24.2 MB/s eta 0:00:00 Installing collected packages: setuptools Attempting uninstall: setuptools Found existing installation: setuptools 65.6.3 Uninstalling setuptools-65.6.3: Successfully uninstalled setuptools-65.6.3 Successfully installed setuptools-58.2.0 [rtd-command-info] start-time: 2022-11-25T15:06:47.185639Z, end-time: 2022-11-25T15:06:55.716760Z, duration: 8, exit-code: 0 python -m pip install --upgrade --no-cache-dir pillow mock==1.0.1 alabaster>=0.7,<0.8,!=0.7.5 commonmark==0.9.1 recommonmark==0.5.0 sphinx sphinx-rtd-theme readthedocs-sphinx-ext<2.3 Collecting pillow Downloading Pillow-9.3.0-cp37-cp37m-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (3.2 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.2/3.2 MB 72.6 MB/s eta 0:00:00 Collecting mock==1.0.1 Downloading mock-1.0.1.zip (861 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 861.9/861.9 kB 246.7 MB/s eta 0:00:00 Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting alabaster!=0.7.5,<0.8,>=0.7 Downloading alabaster-0.7.12-py2.py3-none-any.whl (14 kB) Collecting commonmark==0.9.1 Downloading commonmark-0.9.1-py2.py3-none-any.whl (51 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 51.1/51.1 kB 177.5 MB/s eta 0:00:00 Collecting recommonmark==0.5.0 Downloading recommonmark-0.5.0-py2.py3-none-any.whl (9.8 kB) Collecting sphinx Downloading sphinx-5.3.0-py3-none-any.whl (3.2 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.2/3.2 MB 216.9 MB/s eta 0:00:00 Collecting sphinx-rtd-theme Downloading sphinx_rtd_theme-1.1.1-py2.py3-none-any.whl (2.8 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.8/2.8 MB 215.2 MB/s eta 0:00:00 Collecting readthedocs-sphinx-ext<2.3 Downloading readthedocs_sphinx_ext-2.2.0-py2.py3-none-any.whl (11 kB) Collecting docutils>=0.11 Downloading docutils-0.19-py3-none-any.whl (570 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 570.5/570.5 kB 238.8 MB/s eta 0:00:00 Collecting imagesize>=1.3 Downloading imagesize-1.4.1-py2.py3-none-any.whl (8.8 kB) Collecting requests>=2.5.0 Downloading requests-2.28.1-py3-none-any.whl (62 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 62.8/62.8 kB 185.3 MB/s eta 0:00:00 Collecting Pygments>=2.12 Downloading Pygments-2.13.0-py3-none-any.whl (1.1 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.1/1.1 MB 245.2 MB/s eta 0:00:00 Collecting packaging>=21.0 Downloading packaging-21.3-py3-none-any.whl (40 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 40.8/40.8 kB 171.2 MB/s eta 0:00:00 Collecting sphinxcontrib-htmlhelp>=2.0.0 Downloading sphinxcontrib_htmlhelp-2.0.0-py2.py3-none-any.whl (100 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 100.5/100.5 kB 206.9 MB/s eta 0:00:00 Collecting sphinxcontrib-serializinghtml>=1.1.5 Downloading sphinxcontrib_serializinghtml-1.1.5-py2.py3-none-any.whl (94 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 94.0/94.0 kB 199.8 MB/s eta 0:00:00 Collecting sphinxcontrib-devhelp Downloading sphinxcontrib_devhelp-1.0.2-py2.py3-none-any.whl (84 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 84.7/84.7 kB 195.2 MB/s eta 0:00:00 Collecting Jinja2>=3.0 Downloading Jinja2-3.1.2-py3-none-any.whl (133 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 133.1/133.1 kB 208.7 MB/s eta 0:00:00 Collecting importlib-metadata>=4.8 Downloading importlib_metadata-5.1.0-py3-none-any.whl (21 kB) Collecting babel>=2.9 Downloading Babel-2.11.0-py3-none-any.whl (9.5 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 9.5/9.5 MB 204.8 MB/s eta 0:00:00 Collecting sphinxcontrib-applehelp Downloading sphinxcontrib_applehelp-1.0.2-py2.py3-none-any.whl (121 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 121.2/121.2 kB 215.3 MB/s eta 0:00:00 Collecting snowballstemmer>=2.0 Downloading snowballstemmer-2.2.0-py2.py3-none-any.whl (93 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 93.0/93.0 kB 194.7 MB/s eta 0:00:00 Collecting sphinxcontrib-qthelp Downloading sphinxcontrib_qthelp-1.0.3-py2.py3-none-any.whl (90 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 90.6/90.6 kB 209.5 MB/s eta 0:00:00 Collecting sphinxcontrib-jsmath Downloading sphinxcontrib_jsmath-1.0.1-py2.py3-none-any.whl (5.1 kB) Collecting docutils>=0.11 Downloading docutils-0.17.1-py2.py3-none-any.whl (575 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 575.5/575.5 kB 242.0 MB/s eta 0:00:00 Collecting pytz>=2015.7 Downloading pytz-2022.6-py2.py3-none-any.whl (498 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 498.1/498.1 kB 236.9 MB/s eta 0:00:00 Collecting zipp>=0.5 Downloading zipp-3.10.0-py3-none-any.whl (6.2 kB) Collecting typing-extensions>=3.6.4 Downloading typing_extensions-4.4.0-py3-none-any.whl (26 kB) Collecting MarkupSafe>=2.0 Downloading MarkupSafe-2.1.1-cp37-cp37m-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (25 kB) Collecting pyparsing!=3.0.5,>=2.0.2 Downloading pyparsing-3.0.9-py3-none-any.whl (98 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 98.3/98.3 kB 195.7 MB/s eta 0:00:00 Collecting charset-normalizer<3,>=2 Downloading charset_normalizer-2.1.1-py3-none-any.whl (39 kB) Collecting certifi>=2017.4.17 Downloading certifi-2022.9.24-py3-none-any.whl (161 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 161.1/161.1 kB 206.2 MB/s eta 0:00:00 Collecting idna<4,>=2.5 Downloading idna-3.4-py3-none-any.whl (61 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 61.5/61.5 kB 171.0 MB/s eta 0:00:00 Collecting urllib3<1.27,>=1.21.1 Downloading urllib3-1.26.13-py2.py3-none-any.whl (140 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 140.6/140.6 kB 220.6 MB/s eta 0:00:00 Building wheels for collected packages: mock Building wheel for mock (setup.py): started Building wheel for mock (setup.py): finished with status 'done' Created wheel for mock: filename=mock-1.0.1-py3-none-any.whl size=23772 sha256=7b337482a5ee2aa1d01522ba71cc427cefb565b86282f6d6152982305149f010 Stored in directory: /tmp/pip-ephem-wheel-cache-wo5h46pm/wheels/d1/33/8e/f9d24f00cc130866aacfe7c3bc15571217e2b22cc4c4e1b443 Successfully built mock Installing collected packages: snowballstemmer, pytz, mock, commonmark, alabaster, zipp, urllib3, typing-extensions, sphinxcontrib-serializinghtml, sphinxcontrib-qthelp, sphinxcontrib-jsmath, sphinxcontrib-htmlhelp, sphinxcontrib-devhelp, sphinxcontrib-applehelp, pyparsing, Pygments, pillow, MarkupSafe, imagesize, idna, docutils, charset-normalizer, certifi, babel, requests, packaging, Jinja2, importlib-metadata, sphinx, readthedocs-sphinx-ext, sphinx-rtd-theme, recommonmark Successfully installed Jinja2-3.1.2 MarkupSafe-2.1.1 Pygments-2.13.0 alabaster-0.7.12 babel-2.11.0 certifi-2022.9.24 charset-normalizer-2.1.1 commonmark-0.9.1 docutils-0.17.1 idna-3.4 imagesize-1.4.1 importlib-metadata-5.1.0 mock-1.0.1 packaging-21.3 pillow-9.3.0 pyparsing-3.0.9 pytz-2022.6 readthedocs-sphinx-ext-2.2.0 recommonmark-0.5.0 requests-2.28.1 snowballstemmer-2.2.0 sphinx-5.3.0 sphinx-rtd-theme-1.1.1 sphinxcontrib-applehelp-1.0.2 sphinxcontrib-devhelp-1.0.2 sphinxcontrib-htmlhelp-2.0.0 sphinxcontrib-jsmath-1.0.1 sphinxcontrib-qthelp-1.0.3 sphinxcontrib-serializinghtml-1.1.5 typing-extensions-4.4.0 urllib3-1.26.13 zipp-3.10.0 [rtd-command-info] start-time: 2022-11-25T15:06:55.984313Z, end-time: 2022-11-25T15:07:05.693476Z, duration: 9, exit-code: 0 python -m pip install --exists-action=w --no-cache-dir -r requirements.txt Requirement already satisfied: alabaster==0.7.12 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 1)) (0.7.12) Collecting Babel==2.9.1 Downloading Babel-2.9.1-py2.py3-none-any.whl (8.8 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 8.8/8.8 MB 105.4 MB/s eta 0:00:00 Collecting certifi==2021.10.8 Downloading certifi-2021.10.8-py2.py3-none-any.whl (149 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 149.2/149.2 kB 227.3 MB/s eta 0:00:00 Collecting cffi==1.15.0 Downloading cffi-1.15.0-cp37-cp37m-manylinux_2_12_x86_64.manylinux2010_x86_64.whl (427 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 427.1/427.1 kB 241.5 MB/s eta 0:00:00 Collecting charset-normalizer==2.0.12 Downloading charset_normalizer-2.0.12-py3-none-any.whl (39 kB) Collecting colorama==0.4.4 Downloading colorama-0.4.4-py2.py3-none-any.whl (16 kB) Collecting Deprecated==1.2.13 Downloading Deprecated-1.2.13-py2.py3-none-any.whl (9.6 kB) Requirement already satisfied: docutils==0.17.1 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 8)) (0.17.1) Collecting idna==3.3 Downloading idna-3.3-py3-none-any.whl (61 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 61.2/61.2 kB 191.4 MB/s eta 0:00:00 Collecting imagesize==1.3.0 Downloading imagesize-1.3.0-py2.py3-none-any.whl (5.2 kB) Collecting importlib-metadata==4.11.3 Downloading importlib_metadata-4.11.3-py3-none-any.whl (18 kB) Collecting Jinja2==3.0.3 Downloading Jinja2-3.0.3-py3-none-any.whl (133 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 133.6/133.6 kB 227.1 MB/s eta 0:00:00 Collecting livereload==2.6.3 Downloading livereload-2.6.3.tar.gz (25 kB) Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Requirement already satisfied: MarkupSafe==2.1.1 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 14)) (2.1.1) Requirement already satisfied: packaging==21.3 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 15)) (21.3) Collecting pycparser==2.21 Downloading pycparser-2.21-py2.py3-none-any.whl (118 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 118.7/118.7 kB 219.6 MB/s eta 0:00:00 Collecting PyGithub==1.55 Downloading PyGithub-1.55-py3-none-any.whl (291 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 291.7/291.7 kB 231.0 MB/s eta 0:00:00 Collecting Pygments==2.11.2 Downloading Pygments-2.11.2-py3-none-any.whl (1.1 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.1/1.1 MB 248.4 MB/s eta 0:00:00 Collecting PyJWT==2.4.0 Downloading PyJWT-2.4.0-py3-none-any.whl (18 kB) Collecting PyNaCl==1.5.0 Downloading PyNaCl-1.5.0-cp36-abi3-manylinux_2_17_x86_64.manylinux2014_x86_64.manylinux_2_24_x86_64.whl (856 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 856.7/856.7 kB 248.1 MB/s eta 0:00:00 Collecting pyparsing==3.0.7 Downloading pyparsing-3.0.7-py3-none-any.whl (98 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 98.0/98.0 kB 211.4 MB/s eta 0:00:00 Collecting pytz==2021.3 Downloading pytz-2021.3-py2.py3-none-any.whl (503 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 503.5/503.5 kB 243.0 MB/s eta 0:00:00 Collecting requests==2.27.1 Downloading requests-2.27.1-py2.py3-none-any.whl (63 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 63.1/63.1 kB 167.9 MB/s eta 0:00:00 Collecting six==1.16.0 Downloading six-1.16.0-py2.py3-none-any.whl (11 kB) Requirement already satisfied: snowballstemmer==2.2.0 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 25)) (2.2.0) Collecting Sphinx==4.4.0 Downloading Sphinx-4.4.0-py3-none-any.whl (3.1 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.1/3.1 MB 208.6 MB/s eta 0:00:00 Collecting sphinx-autobuild==2021.3.14 Downloading sphinx_autobuild-2021.3.14-py3-none-any.whl (9.9 kB) Collecting sphinx-jinja==2.0.2 Downloading sphinx_jinja-2.0.2-py3-none-any.whl (4.4 kB) Collecting sphinx-rtd-theme==1.0.0 Downloading sphinx_rtd_theme-1.0.0-py2.py3-none-any.whl (2.8 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.8/2.8 MB 201.9 MB/s eta 0:00:00 Collecting sphinx_substitution_extensions==2022.2.16 Downloading Sphinx_Substitution_Extensions-2022.2.16-py3-none-any.whl (9.8 kB) Requirement already satisfied: sphinxcontrib-applehelp==1.0.2 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 31)) (1.0.2) Requirement already satisfied: sphinxcontrib-devhelp==1.0.2 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 32)) (1.0.2) Requirement already satisfied: sphinxcontrib-htmlhelp==2.0.0 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 33)) (2.0.0) Requirement already satisfied: sphinxcontrib-jsmath==1.0.1 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 34)) (1.0.1) Requirement already satisfied: sphinxcontrib-qthelp==1.0.3 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 35)) (1.0.3) Requirement already satisfied: sphinxcontrib-serializinghtml==1.1.5 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 36)) (1.1.5) Collecting tornado==6.1 Downloading tornado-6.1-cp37-cp37m-manylinux2010_x86_64.whl (428 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 428.5/428.5 kB 241.4 MB/s eta 0:00:00 Collecting urllib3==1.26.9 Downloading urllib3-1.26.9-py2.py3-none-any.whl (138 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 139.0/139.0 kB 221.1 MB/s eta 0:00:00 Collecting wrapt==1.14.0 Downloading wrapt-1.14.0-cp37-cp37m-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl (75 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 75.2/75.2 kB 196.4 MB/s eta 0:00:00 Collecting zipp==3.7.0 Downloading zipp-3.7.0-py3-none-any.whl (5.3 kB) Requirement already satisfied: typing-extensions>=3.6.4 in /home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages (from importlib-metadata==4.11.3->-r requirements.txt (line 11)) (4.4.0) Building wheels for collected packages: livereload Building wheel for livereload (setup.py): started Building wheel for livereload (setup.py): finished with status 'done' Created wheel for livereload: filename=livereload-2.6.3-py2.py3-none-any.whl size=24727 sha256=e5eba88eb41db358e0734777496dfbfee69a7bd8073005926b72b23b1531d2e0 Stored in directory: /tmp/pip-ephem-wheel-cache-j4ai4wl2/wheels/0a/da/85/bbc4365bb71f2214c599aeeb901517e5f883c5f1988b92515f Successfully built livereload Installing collected packages: pytz, certifi, zipp, wrapt, urllib3, tornado, six, pyparsing, PyJWT, Pygments, pycparser, Jinja2, imagesize, idna, colorama, charset-normalizer, Babel, requests, livereload, importlib-metadata, Deprecated, cffi, Sphinx, PyNaCl, sphinx_substitution_extensions, sphinx-rtd-theme, sphinx-jinja, sphinx-autobuild, PyGithub Attempting uninstall: pytz Found existing installation: pytz 2022.6 Uninstalling pytz-2022.6: Successfully uninstalled pytz-2022.6 Attempting uninstall: certifi Found existing installation: certifi 2022.9.24 Uninstalling certifi-2022.9.24: Successfully uninstalled certifi-2022.9.24 Attempting uninstall: zipp Found existing installation: zipp 3.10.0 Uninstalling zipp-3.10.0: Successfully uninstalled zipp-3.10.0 Attempting uninstall: urllib3 Found existing installation: urllib3 1.26.13 Uninstalling urllib3-1.26.13: Successfully uninstalled urllib3-1.26.13 Attempting uninstall: pyparsing Found existing installation: pyparsing 3.0.9 Uninstalling pyparsing-3.0.9: Successfully uninstalled pyparsing-3.0.9 Attempting uninstall: Pygments Found existing installation: Pygments 2.13.0 Uninstalling Pygments-2.13.0: Successfully uninstalled Pygments-2.13.0 Attempting uninstall: Jinja2 Found existing installation: Jinja2 3.1.2 Uninstalling Jinja2-3.1.2: Successfully uninstalled Jinja2-3.1.2 Attempting uninstall: imagesize Found existing installation: imagesize 1.4.1 Uninstalling imagesize-1.4.1: Successfully uninstalled imagesize-1.4.1 Attempting uninstall: idna Found existing installation: idna 3.4 Uninstalling idna-3.4: Successfully uninstalled idna-3.4 Attempting uninstall: charset-normalizer Found existing installation: charset-normalizer 2.1.1 Uninstalling charset-normalizer-2.1.1: Successfully uninstalled charset-normalizer-2.1.1 Attempting uninstall: Babel Found existing installation: Babel 2.11.0 Uninstalling Babel-2.11.0: Successfully uninstalled Babel-2.11.0 Attempting uninstall: requests Found existing installation: requests 2.28.1 Uninstalling requests-2.28.1: Successfully uninstalled requests-2.28.1 Attempting uninstall: importlib-metadata Found existing installation: importlib-metadata 5.1.0 Uninstalling importlib-metadata-5.1.0: Successfully uninstalled importlib-metadata-5.1.0 Attempting uninstall: Sphinx Found existing installation: Sphinx 5.3.0 Uninstalling Sphinx-5.3.0: Successfully uninstalled Sphinx-5.3.0 Attempting uninstall: sphinx-rtd-theme Found existing installation: sphinx-rtd-theme 1.1.1 Uninstalling sphinx-rtd-theme-1.1.1: Successfully uninstalled sphinx-rtd-theme-1.1.1 Successfully installed Babel-2.9.1 Deprecated-1.2.13 Jinja2-3.0.3 PyGithub-1.55 PyJWT-2.4.0 PyNaCl-1.5.0 Pygments-2.11.2 Sphinx-4.4.0 certifi-2021.10.8 cffi-1.15.0 charset-normalizer-2.0.12 colorama-0.4.4 idna-3.3 imagesize-1.3.0 importlib-metadata-4.11.3 livereload-2.6.3 pycparser-2.21 pyparsing-3.0.7 pytz-2021.3 requests-2.27.1 six-1.16.0 sphinx-autobuild-2021.3.14 sphinx-jinja-2.0.2 sphinx-rtd-theme-1.0.0 sphinx_substitution_extensions-2022.2.16 tornado-6.1 urllib3-1.26.9 wrapt-1.14.0 zipp-3.7.0 [rtd-command-info] start-time: 2022-11-25T15:07:08.187889Z, end-time: 2022-11-25T15:07:08.248709Z, duration: 0, exit-code: 0 cat source/conf.py # Configuration file for the Sphinx documentation builder. # # This file only contains a selection of the most common options. For a full # list see the documentation: # https://www.sphinx-doc.org/en/master/usage/configuration.html # -- Path setup -------------------------------------------------------------- # If extensions (or modules to document with autodoc) are in another directory, # add these directories to sys.path here. If the directory is relative to the # documentation root, use os.path.abspath to make it absolute, like shown here. # # import os # import sys # sys.path.insert(0, os.path.abspath('.')) from get_rst_files import get_files # -- Project information ----------------------------------------------------- project = "Eumetsat" copyright = "2022, CloudFerro" author = "CloudFerro" # The full version, including alpha/beta/rc tags release = "0.0.1" def setup(app): app.add_config_value('brand_name', '', True) # -- General configuration --------------------------------------------------- # Add any Sphinx extension module names here, as strings. They can be # extensions coming with Sphinx (named 'sphinx.ext.*') or your custom # ones. extensions = ['sphinx_substitution_extensions', 'sphinx.ext.ifconfig','sphinx_jinja'] rst_prolog = """ .. |brand-name| replace:: Eumetsat Elasticity .. |brand-name-hyphen| replace:: Eumetsat-Elasticity .. |brand-name-site-link| replace:: https://horizon.cloudferro.com/auth/login/?next=/ .. |brand-name-site-auth-link| replace:: https://eumetsat.cloudferro.com/ """ brand_name = 'Eumetsat Elasticity' # Ima # Images that change from brand to brand jinja_contexts = { 'image_names': {'register': 'register_eumetsat.png', 'create': 'create_account_eumetsat.png', 'registered': 'registration_successful_eumetsat.png'}, 'forgotten_password_names': { 'enter_email': 'forgot_your_password_eumetsat.png', 'email_message': 'email_message_eumetsat.png', 'enter_new_password': 'enter_new_password_eumetsat.png' }, 'accounts_and_projects_management': { 'acc_01': 'acc_01_eumetsat.png', }, 'contracts_and_wallets': { 'contracts_wallets': 'wallets_contracts_eumetsat.png', }, 'editing_profiles': { 'editing_profile': 'editing_profile_eumetsat.png', }, 'inviting_new_user': { 'inv_01': 'inv_01_eumetsat.png', 'inv_02': 'inv_02_eumetsat.png', }, 'removing_user': { 'users_roles_01': 'inv_01_eumetsat.png', }, 'users_roles': { 'users_roles': 'users_roles_eumetsat.png', }, 'services': { 'services': 'services_eumetsat.png', }, 'adding_editing_organizations': { 'org_01': 'register_organization_eumetsat.png', }, 'login_vm': { 'login': 'login_eumetsat.png', }, 's3_login': { 's3_login': 's3.waw3-1.cloudferro.com', }, 'dual_factor_authentication': { 'eefa_qr_screen': 'eefa_qr_screen_eumetsat.png', 'eefa_start': 'eefa_start_eumetsat.png', 'eefa_sign_regular': 'eefa_sign_regular_eumetsat.png', 'eefa_mobile_auth_setup': 'eefa_mobile_auth_setup_eumetsat.png', 'eefa_normal-Login': 'eefa_normal-Login_eumetsat.png', 'eefa_sign_regular': 'eefa_sign_regular_eumetsat.png', 'eefa_restart_login': 'eefa_restart_login_eumetsat.png', 'eefa_restart_code': 'eefa_restart_code_eumetsat.png', 'eefa_828966': 'eefa_828966_eumetsat.png', 'eefa_logged_in': 'eefa_logged_in_eumetsat.png', }, 'brand_names': { 'brand_name': 'Eumetsat Elasticity', 'brand_name_hyphen': 'Eumetsat-Elasticity' , 'brand_name_site_link': 'https://horizon.cloudferro.com/auth/login/?next=/', 'brand_name_site_auth_link': 'https://eumetsat.cloudferro.com/', 'datavolume': 'datavolume', 'openstack': 'openstack', 'openstackcli': 'openstackcli', 'eodata': 'eodata', 'gettingstarted': 'gettingstarted', 'general': 'general', 's3': 's3', 'sfs': 'sfs', 'versions': 'versions', 'vgpu': 'vgpu', 'kubernetes': 'kubernetes', 'networking': 'networking', 'windows': 'windows', 'security': 'security', }, } # Add any paths that contain templates here, relative to this directory. templates_path = ["_templates"] # List of patterns, relative to source directory, that match files and # directories to ignore when looking for source files. # This pattern also affects html_static_path and html_extra_path. exclude_patterns = [] urls_dict = get_files( { "gettingstarted": [ "https://github.com/CloudFerro/waw3-1-kubernetes-test/tree/main/source/gettingstarted", "https://github.com/CloudFerro/cf3-doc/blob/main/source/gettingstarted/Dual-Factor-Authentication-for-Eumetsat-Elasticity-Site", "https://github.com/CloudFerro/cf3-doc/blob/main/source/gettingstarted/Using-KeePassXC-for-Two-Factor-Authentication-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/gettingstarted/Registration-And-Account", "https://github.com/CloudFerro/cf3-doc/blob/main/source/gettingstarted/Accounts-and-Projects-Management", "https://github.com/CloudFerro/cf3-doc/blob/main/source/gettingstarted/Forgotten-Password", "https://github.com/CloudFerro/cf3-doc/blob/main/source/gettingstarted/Privacy-Policy", "https://github.com/CloudFerro/cf3-doc/blob/main/source/gettingstarted/Adding-Editing-Organizations", "https://github.com/CloudFerro/cf3-doc/blob/main/source/gettingstarted/Contracts-Wallets", "https://github.com/CloudFerro/cf3-doc/blob/main/source/gettingstarted/Editing-Profile", "https://github.com/CloudFerro/cf3-doc/blob/main/source/gettingstarted/Inviting-New-User", "https://github.com/CloudFerro/cf3-doc/blob/main/source/gettingstarted/Removing-User-From-Organization", "https://github.com/CloudFerro/cf3-doc/blob/main/source/gettingstarted/Services", "https://github.com/CloudFerro/cf3-doc/blob/main/source/gettingstarted/Users-Roles", "https://github.com/CloudFerro/waw3-1-kubernetes-test/blob/main/source/gettingstarted/Help-Desk-And-Support", ], "kubernetes": [ "https://github.com/CloudFerro/waw3-1-kubernetes-test/tree/main/source/kubernetes", "https://github.com/CloudFerro/kubernetes-doc/blob/main/source/How-to-Create-a-Kubernetes-Cluster-Using-Eumetsat-Elasticity-OpenStack-Magnum", "https://github.com/CloudFerro/kubernetes-doc/blob/main/source/How-to-Create-a-Kubernetes-Cluster-Template-Using-Eumetsat-Elasticity-OpenStack-Magnum", "https://github.com/CloudFerro/kubernetes-doc/blob/main/source/How-To-Install-OpenStack-and-Magnum-Clients-for-Command-Line-Interface-to-Eumetsat-Elasticity-Horizon", "https://github.com/CloudFerro/kubernetes-doc/blob/main/source/How-To-Use-Command-Line-Interface-for-Kubernetes-Clusters-On-Eumetsat-Elasticity-OpenStack-Magnum", "https://github.com/CloudFerro/kubernetes-doc/blob/main/source/How-To-Access-Kubernetes-Cluster-Post-Deployment-Using-Kubectl-On-Eumetsat-Elasticity-OpenStack-Magnum", "https://github.com/CloudFerro/kubernetes-doc/blob/main/source/Using-Dashboard-To-Access-Kubernetes-Cluster-Post-Deployment-On-Eumetsat-Elasticity-OpenStack-Magnum", "https://github.com/CloudFerro/kubernetes-doc/blob/main/source/How-To-Create-API-Server-LoadBalancer-for-Kubernetes-Cluster-On-Eumetsat-Elasticity-OpenStack-Magnum", "https://github.com/CloudFerro/kubernetes-doc/blob/main/source/Creating-Additional-Nodegroups-in-Kubernetes-Cluster-on-Eumetsat-Elasticity-OpenStack-Magnum", "https://github.com/CloudFerro/kubernetes-doc/blob/main/source/Autoscaling-Kubernetes-Cluster-Resources-on-Eumetsat-Elasticity-OpenStack-Magnum", "https://github.com/CloudFerro/kubernetes-doc/blob/main/source/Volume-based-vs-Ephemeral-based-Storage-for-Kubernetes-Clusters-on-Eumetsat-Elasticity-OpenStack-Magnum", "https://github.com/CloudFerro/kubernetes-doc/blob/main/source/Backup-of-Kubernetes-Cluster-using-Velero", "https://github.com/CloudFerro/kubernetes-doc/blob/main/source/Persistent-Volumes-and-Persistent-Volume-Claims-on-Eumetsat-Elasticity-WAW3-1-Server", ], "cuttingedge": [ "https://github.com/CloudFerro/cf3-doc/tree/main/source/cuttingedge", "https://github.com/CloudFerro/cf3-doc/blob/main/source/cuttingedge/Install-TensorFlow-on-Docker-Running-on-Eumetsat-Elasticity-WAW3-1-vGPU-Virtual-Machine", "https://github.com/CloudFerro/cf3-doc/blob/main/source/cuttingedge/Sample-Deep-Learning-Workflow-Using-TensorFlow-Running-on-Docker-Installed-on-Eumetsat-Elasticity-WAW3-1-vGPU-Virtual-Machine", "https://github.com/CloudFerro/cf3-doc/blob/main/source/cuttingedge/Install-TensorFlow-on-WAW3-1-vGPU-enabled-VM-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/cuttingedge/Sample-Deep-Learning-workflow-using-WAW3-1-vGPU-and-EO-DATA-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/cuttingedge/Sample-SLURM-Cluster-on-Creodias-WAW3-1-Cloud-with-ElastiCluster", "https://github.com/CloudFerro/cf3-doc/blob/main/source/cuttingedge/Sample-Workflow-Running-EO-Processing-MPI-jobs-on-a-SLURM-cluster-on-Eumetsat-Elasticity-WAW3-1-Cloud", ], "datavolume": [ "https://github.com/CloudFerro/waw3-1-kubernetes-test/tree/main/source/datavolume", "https://github.com/CloudFerro/cf3-doc/blob/main/source/datavolume/How-to-access-EODATA-and-Object-Storage-using-s3cmd-on-Linux-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/datavolume/How-to-attach-a-volume-to-VM-less-than-2TB-on-Linux-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/datavolume/How-to-attach-a-volume-to-VM-more-than-2TB-on-Linux-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/datavolume/Cannot-access-EODATA-error-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/datavolume/Ephemeral-vs-Persistent-storage-option-Create-New-Volume-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/datavolume/How-to-export-a-volume-over-NFS-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/datavolume/How-to-export-a-volume-over-NFS-outside-of-a-project-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/datavolume/How-to-extend-the-volume-in-Linux-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/datavolume/How-many-objects-can-I-put-into-Object-Storage-container-bucket-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/datavolume/How-to-access-Earth-Observation-Data-EODATA-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/datavolume/How-to-mount-Network-Drive-over-SSH-in-Windows-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/datavolume/How-to-mount-object-storage-in-Linux-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/datavolume/How-to-move-a-data-volume-between-VMs-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/datavolume/How-to-create-volume-Snapshot-and-attach-as-Volume-on-Linux-or-Windows-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/datavolume/Volume-snapshot-inheritance-and-its-consequences-on-Eumetsat-Elasticity", ], "eodata": [ "https://github.com/CloudFerro/waw3-1-kubernetes-test/tree/main/source/eodata", "https://github.com/CloudFerro/cf3-doc/blob/main/source/eodata/How-to-access-or-list-EODATA-using-boto3-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/eodata/Cannot-access-EODATA-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/eodata/How-to-download-EODATA-file-using-boto3-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/eodata/EODATA-access-using-S3-or-NFS-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/eodata/How-to-mount-eodata-as-a-filesystem-using-Goofys-in-Linux-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/eodata/How-to-mount-eodata-using-S3FS-in-Linux-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/eodata/How-to-mount-Eodata-using-S3-protocol-in-Linux-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/eodata/How-to-download-EODATA-files-using-s3cmd-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/eodata/Performance-in-accessing-EODATA-over-NFS-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/eodata/How-to-configure-CloudFerro-Remote-Transfer-for-EODATA-using-s3cmd-in-Linux-on-Eumetsat-Elasticity", ], "general": [ "https://github.com/CloudFerro/waw3-1-kubernetes-test/tree/main/source/general", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/How-to-access-the-VM-from-OpenStack-console-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/How-to-clone-existing-and-configured-VMs-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/How-to-fix-unresponsive-console-issue-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/How-to-generate-ec2-credentials-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/How-to-generate-or-use-Application-Credentials-via-CLI-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/How-to-use-GUI-in-VM-with-Linux-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/How-To-Create-a-New-Linux-VM-With-NVIDIA-Virtual-GPU-in-the-OpenStack-Dashboard-Horizon-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/How-to-use-Docker-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/How-to-use-Security-Groups-in-Horizon-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/How-to-create-key-pair-in-OpenStack-Dashboard-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/How-to-create-new-Linux-VM-in-OpenStack-Dashboard-Horizon-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/How-to-install-Python-virtualenv-or-virtualenvwrapper-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/How-to-start-a-VM-from-a-snapshot-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/Status-Power-State-and-dependences-in-billing-of-instances-VMs-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/How-to-upload-your-custom-image-using-OpenStack-CLI-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/VM-created-with-option-Create-New-Volume-No-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/VM-created-with-option-Create-New-Volume-Yes-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/Volume-snapshot-inheritance-and-its-consequences-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/Dashboard-Overview-Project-Quotas-And-Flavors-Limits-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/How-to-create-a-Linux-VM-and-access-it-from-Linux-command-line-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/general/How-to-create-a-Linux-VM-and-access-it-from-Windows-desktop-on-Eumetsat-Elasticity", ], "networking": [ "https://github.com/CloudFerro/waw3-1-kubernetes-test/tree/main/source/networking", "https://github.com/CloudFerro/cf3-doc/blob/main/source/networking/How-can-I-access-my-VMs-using-names-instead-of-IP-addresses-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/networking/How-to-Add-or-Remove-Floating-IP’s-to-your-VM-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/networking/Cannot-access-VM-with-SSH-or-PING-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/networking/Cannot-ping-VM-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/networking/How-to-connect-to-your-virtual-machine-via-SSH-in-Linux-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/networking/How-to-create-a-network-with-router-in-Horizon-Dashboard-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/networking/How-can-I-open-new-ports-port-80-for-http-for-my-service-or-instance-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/networking/Generating-a-SSH-keypair-in-Linux-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/networking/How-to-add-SSH-key-from-Horizon-web-console-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/networking/How-is-my-VM-visible-in-the-internet-with-no-Floating-IP-attached-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/networking/How-to-run-and-configure-Firewall-as-a-service-and-VPN-as-a-service-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/windows/How-to-connect-to-a-virtual-machine-via-SSH-from-Windows-10-Command-Prompt-on-Eumetsat-Elasticity", ], "openstackcli": [ "https://github.com/CloudFerro/waw3-1-kubernetes-test/tree/main/source/openstackcli", "https://github.com/CloudFerro/cf3-doc/blob/main/source/openstackcli/How-to-backup-an-instance-and-download-it-to-the-desktop-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/openstackcli/How-to-create-a-set-of-VMs-using-OpenStack-Heat-Orchestration-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/openstackcli/How-to-create-and-configure-new-project-in-OpenStack-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/openstackcli/How-to-install-OpenStackClient-for-Linux-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/openstackcli/How-to-install-OpenStackClient-GitBash-or-Cygwin-for-Windows-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/openstackcli/How-to-share-private-container-from-object-storage-to-another-user-on-Eumetsat-Elasticity", ], "s3": [ "https://github.com/CloudFerro/waw3-1-kubernetes-test/tree/main/source/s3", "https://github.com/CloudFerro/cf3-doc/blob/main/source/s3/How-to-delete-large-S3-bucket-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/s3/How-to-mount-object-storage-container-as-a-file-system-in-Linux-using-s3fs-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/s3/How-to-use-Object-Storage-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/s3/How-to-access-private-object-storage-using-S3cmd-or-boto3-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/s3/S3FS-Cache-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/s3/Bucket-sharing-using-s3-bucket-policy-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/s3/How-To-Install-boto3-In-Windows-on-Eumetsat-Elasticity", ], "sfs": [ "https://github.com/CloudFerro/waw3-1-kubernetes-test/tree/main/source/sfs", "https://github.com/CloudFerro/kubernetes-doc/blob/main/source/How-To-Create-A-Local-Horizon-User", "https://github.com/CloudFerro/kubernetes-doc/blob/main/source/How-To-Create-Manila-Network-And-Manila-User-Role", "https://github.com/CloudFerro/kubernetes-doc/blob/main/source/How-To-Enable-Command-Line-Interface-For-Local-Horizon-User", "https://github.com/CloudFerro/kubernetes-doc/blob/main/source/How-To-Install-Shared-File-System-Based-On-Manila-OpenStack", "https://github.com/CloudFerro/kubernetes-doc/blob/main/source/How-To-Increase-Security-For-Shared-File-System-Based-On-Manila-OpenStack", ], "versions": [ "https://github.com/CloudFerro/waw3-1-kubernetes-test/tree/main/source/versions", "https://github.com/CloudFerro/cf3-doc/blob/main/source/versions/OpenStack-Versions", "https://github.com/CloudFerro/cf3-doc/blob/main/source/versions/Release-Notes-1-0-1", "https://github.com/CloudFerro/cf3-doc/blob/main/source/versions/Release-Notes-1-0-0", ], "windows": [ "https://github.com/CloudFerro/waw3-1-kubernetes-test/tree/main/source/windows", "https://github.com/CloudFerro/cf3-doc/blob/main/source/windows/Connecting-to-a-Windows-VM-via-RDP-through-a-Linux-bastion-host-port-forwarding-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/windows/How-to-access-a-VM-from-Windows-PuTTY-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/windows/How-to-connect-to-a-virtual-machine-via-SSH-from-Windows-10-Command-Prompt-on-Eumetsat-Elasticity", "https://github.com/CloudFerro/cf3-doc/blob/main/source/windows/How-To-Create-SSH-Key-Pair-In-Windows-On-Eumetsat-Elasticity", ], } ) html_context = { "display_github": True, "urls_dict": urls_dict, "github_host": "github.com", "github_user": "CloudFerro", "github_repo": "waw3-1-kubernetes-test", "github_version": "main", "conf_py_path": "/source/", "source_suffix": ".rst", } # -- Options for HTML output ------------------------------------------------- # The theme to use for HTML and HTML Help pages. See the documentation for # a list of builtin themes. # html_theme = "sphinx_rtd_theme" # Add any paths that contain custom static files (such as style sheets) here, # relative to this directory. They are copied after the builtin static files, # so a file named "default.css" will overwrite the builtin "default.css". html_static_path = ["_static"] html_logo = "eumetsat_logo.png" html_theme_options = { 'logo_only': True, 'display_version': False, } html_css_files = [ 'css/custom.css', ] html_js_files = [ 'js/custom.js' ] ########################################################################### # auto-created readthedocs.org specific configuration # ########################################################################### # # The following code was added during an automated build on readthedocs.org # It is auto created and injected for every build. The result is based on the # conf.py.tmpl file found in the readthedocs.org codebase: # https://github.com/rtfd/readthedocs.org/blob/main/readthedocs/doc_builder/templates/doc_builder/conf.py.tmpl # # Note: this file shouldn't rely on extra dependencies. import importlib import sys import os.path # Borrowed from six. PY3 = sys.version_info[0] == 3 string_types = str if PY3 else basestring from sphinx import version_info # Get suffix for proper linking to GitHub # This is deprecated in Sphinx 1.3+, # as each page can have its own suffix if globals().get('source_suffix', False): if isinstance(source_suffix, string_types): SUFFIX = source_suffix elif isinstance(source_suffix, (list, tuple)): # Sphinx >= 1.3 supports list/tuple to define multiple suffixes SUFFIX = source_suffix[0] elif isinstance(source_suffix, dict): # Sphinx >= 1.8 supports a mapping dictionary for multiple suffixes SUFFIX = list(source_suffix.keys())[0] # make a ``list()`` for py2/py3 compatibility else: # default to .rst SUFFIX = '.rst' else: SUFFIX = '.rst' # Add RTD Static Path. Add to the end because it overwrites previous files. if not 'html_static_path' in globals(): html_static_path = [] if os.path.exists('_static'): html_static_path.append('_static') # Add RTD Theme only if they aren't overriding it already using_rtd_theme = ( ( 'html_theme' in globals() and html_theme in ['default'] and # Allow people to bail with a hack of having an html_style 'html_style' not in globals() ) or 'html_theme' not in globals() ) if using_rtd_theme: theme = importlib.import_module('sphinx_rtd_theme') html_theme = 'sphinx_rtd_theme' html_style = None html_theme_options = {} if 'html_theme_path' in globals(): html_theme_path.append(theme.get_html_theme_path()) else: html_theme_path = [theme.get_html_theme_path()] if globals().get('websupport2_base_url', False): websupport2_base_url = 'https://readthedocs.com/websupport' websupport2_static_url = 'https://assets.readthedocs.com/' #Add project information to the template context. context = { 'using_theme': using_rtd_theme, 'html_theme': html_theme, 'current_version': "latest", 'version_slug': "latest", 'MEDIA_URL': "https://media.readthedocs.com/media/", 'STATIC_URL': "https://assets.readthedocs.com/", 'PRODUCTION_DOMAIN': "readthedocs.com", 'proxied_static_path': "/_/static/", 'versions': [ ("latest", "/en/latest/"), ], 'downloads': [ ("pdf", "//eumetsat.docs.cloudferro.com/_/downloads/en/latest/pdf/"), ("html", "//eumetsat.docs.cloudferro.com/_/downloads/en/latest/htmlzip/"), ("epub", "//eumetsat.docs.cloudferro.com/_/downloads/en/latest/epub/"), ], 'subprojects': [ ], 'slug': 'cloudferro-waw3-1-kubernetes-test', 'name': u'eumetsat.docs.cloudferro.com', 'rtd_language': u'en', 'programming_language': u'words', 'canonical_url': 'https://eumetsat.docs.cloudferro.com/en/latest/', 'analytics_code': 'None', 'single_version': False, 'conf_py_path': '/source/', 'api_host': 'https://readthedocs.com', 'github_user': 'CloudFerro', 'proxied_api_host': '/_', 'github_repo': 'waw3-1-kubernetes-test', 'github_version': 'main', 'display_github': True, 'bitbucket_user': 'None', 'bitbucket_repo': 'None', 'bitbucket_version': 'main', 'display_bitbucket': False, 'gitlab_user': 'None', 'gitlab_repo': 'None', 'gitlab_version': 'main', 'display_gitlab': False, 'READTHEDOCS': True, 'using_theme': (html_theme == "default"), 'new_theme': (html_theme == "sphinx_rtd_theme"), 'source_suffix': SUFFIX, 'ad_free': False, 'docsearch_disabled': False, 'user_analytics_code': '', 'global_analytics_code': 'UA-17997319-2', 'commit': '0b7613db', } # For sphinx >=1.8 we can use html_baseurl to set the canonical URL. # https://www.sphinx-doc.org/en/master/usage/configuration.html#confval-html_baseurl if version_info >= (1, 8): if not globals().get('html_baseurl'): html_baseurl = context['canonical_url'] context['canonical_url'] = None if 'html_context' in globals(): html_context.update(context) else: html_context = context # Add custom RTD extension if 'extensions' in globals(): # Insert at the beginning because it can interfere # with other extensions. # See https://github.com/rtfd/readthedocs.org/pull/4054 extensions.insert(0, "readthedocs_ext.readthedocs") else: extensions = ["readthedocs_ext.readthedocs"] # Add External version warning banner to the external version documentation if 'branch' == 'external': extensions.insert(1, "readthedocs_ext.external_version_warning") readthedocs_vcs_url = 'None' readthedocs_build_url = 'https://readthedocs.com/projects/cloudferro-waw3-1-kubernetes-test/builds/1196345/' project_language = 'en' # User's Sphinx configurations language_user = globals().get('language', None) latex_engine_user = globals().get('latex_engine', None) latex_elements_user = globals().get('latex_elements', None) # Remove this once xindy gets installed in Docker image and XINDYOPS # env variable is supported # https://github.com/rtfd/readthedocs-docker-images/pull/98 latex_use_xindy = False chinese = any([ language_user in ('zh_CN', 'zh_TW'), project_language in ('zh_CN', 'zh_TW'), ]) japanese = any([ language_user == 'ja', project_language == 'ja', ]) if chinese: latex_engine = latex_engine_user or 'xelatex' latex_elements_rtd = { 'preamble': '\\usepackage[UTF8]{ctex}\n', } latex_elements = latex_elements_user or latex_elements_rtd elif japanese: latex_engine = latex_engine_user or 'platex' # Make sure our build directory is always excluded exclude_patterns = globals().get('exclude_patterns', []) exclude_patterns.extend(['_build']) [rtd-command-info] start-time: 2022-11-25T15:07:08.584629Z, end-time: 2022-11-25T15:12:08.527056Z, duration: 299, exit-code: 2 python -m sphinx -T -E -b html -d _build/doctrees -D language=en . _build/html Running Sphinx v4.4.0 WARNING: "source/cuttingedge/Sample-SLURM-Cluster-on-Creodias-WAW3-1-Cloud-with-ElastiCluster" is omitted, "404", "Not Found" Traceback (most recent call last): File "/home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages/sphinx/config.py", line 340, in eval_config_file exec(code, namespace) File "/home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/conf.py", line 314, in "https://github.com/CloudFerro/cf3-doc/blob/main/source/windows/How-To-Create-SSH-Key-Pair-In-Windows-On-Eumetsat-Elasticity", File "/home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/get_rst_files.py", line 86, in get_files contents_list = repo.get_contents(dir_name) File "/home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages/github/Repository.py", line 1792, in get_contents parameters=url_parameters, File "/home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages/github/Requester.py", line 355, in requestJsonAndCheck verb, url, parameters, headers, input, self.__customConnection(url) File "/home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages/github/Requester.py", line 378, in __check raise self.__createException(status, responseHeaders, output) github.GithubException.UnknownObjectException: 404 {"message": "Not Found", "documentation_url": "https://docs.github.com/rest/reference/repos#get-repository-content"} The above exception was the direct cause of the following exception: Traceback (most recent call last): File "/home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages/sphinx/cmd/build.py", line 283, in build_main args.tags, args.verbosity, args.jobs, args.keep_going) File "/home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages/sphinx/application.py", line 209, in __init__ self.config = Config.read(self.confdir, confoverrides or {}, self.tags) File "/home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages/sphinx/config.py", line 173, in read namespace = eval_config_file(filename, tags) File "/home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages/sphinx/config.py", line 353, in eval_config_file raise ConfigError(msg % traceback.format_exc()) from exc sphinx.errors.ConfigError: There is a programmable error in your configuration file: Traceback (most recent call last): File "/home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages/sphinx/config.py", line 340, in eval_config_file exec(code, namespace) File "/home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/conf.py", line 314, in "https://github.com/CloudFerro/cf3-doc/blob/main/source/windows/How-To-Create-SSH-Key-Pair-In-Windows-On-Eumetsat-Elasticity", File "/home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/get_rst_files.py", line 86, in get_files contents_list = repo.get_contents(dir_name) File "/home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages/github/Repository.py", line 1792, in get_contents parameters=url_parameters, File "/home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages/github/Requester.py", line 355, in requestJsonAndCheck verb, url, parameters, headers, input, self.__customConnection(url) File "/home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages/github/Requester.py", line 378, in __check raise self.__createException(status, responseHeaders, output) github.GithubException.UnknownObjectException: 404 {"message": "Not Found", "documentation_url": "https://docs.github.com/rest/reference/repos#get-repository-content"} Configuration error: There is a programmable error in your configuration file: Traceback (most recent call last): File "/home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages/sphinx/config.py", line 340, in eval_config_file exec(code, namespace) File "/home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/conf.py", line 314, in "https://github.com/CloudFerro/cf3-doc/blob/main/source/windows/How-To-Create-SSH-Key-Pair-In-Windows-On-Eumetsat-Elasticity", File "/home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/checkouts/latest/source/get_rst_files.py", line 86, in get_files contents_list = repo.get_contents(dir_name) File "/home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages/github/Repository.py", line 1792, in get_contents parameters=url_parameters, File "/home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages/github/Requester.py", line 355, in requestJsonAndCheck verb, url, parameters, headers, input, self.__customConnection(url) File "/home/docs/checkouts/readthedocs.org/user_builds/cloudferro-waw3-1-kubernetes-test/envs/latest/lib/python3.7/site-packages/github/Requester.py", line 378, in __check raise self.__createException(status, responseHeaders, output) github.GithubException.UnknownObjectException: 404 {"message": "Not Found", "documentation_url": "https://docs.github.com/rest/reference/repos#get-repository-content"}