Read the Docs build information Build id: 1076292 Project: metalsoft-metalsoft-docs Version: latest Commit: 8e71dac2fdd6a9a60cbc6c95f636257c784f26ed Date: 2022-08-31T10:27:28.490111Z State: finished Success: True [rtd-command-info] start-time: 2022-08-31T10:27:30.527444Z, end-time: 2022-08-31T10:27:34.783248Z, duration: 4, exit-code: 0 git clone --no-single-branch --depth 50 git@github.com:metalsoft-io/metalsoft-docs.git . Cloning into '.'... Warning: Permanently added 'github.com,192.30.255.113' (ECDSA) to the list of known hosts. [rtd-command-info] start-time: 2022-08-31T10:27:35.000140Z, end-time: 2022-08-31T10:27:35.307008Z, duration: 0, exit-code: 0 git checkout --force origin/master Note: switching to 'origin/master'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by switching back to a branch. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -c with the switch command. Example: git switch -c Or undo this operation with: git switch - Turn off this advice by setting config variable advice.detachedHead to false HEAD is now at 8e71dac API key navigation instructions updated [rtd-command-info] start-time: 2022-08-31T10:27:35.493664Z, end-time: 2022-08-31T10:27:35.556591Z, duration: 0, exit-code: 0 git clean -d -f -f [rtd-command-info] start-time: 2022-08-31T10:27:36.870399Z, end-time: 2022-08-31T10:27:41.376452Z, duration: 4, exit-code: 0 python3.7 -mvirtualenv Using base prefix '/home/docs/.pyenv/versions/3.7.9' New python executable in /home/docs/checkouts/readthedocs.org/user_builds/metalsoft-metalsoft-docs/envs/latest/bin/python3.7 Also creating executable in /home/docs/checkouts/readthedocs.org/user_builds/metalsoft-metalsoft-docs/envs/latest/bin/python Installing setuptools, pip, wheel... done. [rtd-command-info] start-time: 2022-08-31T10:27:41.646117Z, end-time: 2022-08-31T10:27:43.415322Z, duration: 1, exit-code: 0 python -m pip install --upgrade --no-cache-dir pip setuptools<58.3.0 Requirement already satisfied: pip in /home/docs/checkouts/readthedocs.org/user_builds/metalsoft-metalsoft-docs/envs/latest/lib/python3.7/site-packages (22.2.2) Collecting setuptools<58.3.0 Downloading setuptools-58.2.0-py3-none-any.whl (946 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 946.1/946.1 kB 18.6 MB/s eta 0:00:00 Installing collected packages: setuptools Attempting uninstall: setuptools Found existing installation: setuptools 65.3.0 Uninstalling setuptools-65.3.0: Successfully uninstalled setuptools-65.3.0 Successfully installed setuptools-58.2.0 [rtd-command-info] start-time: 2022-08-31T10:27:43.630209Z, end-time: 2022-08-31T10:27:50.549259Z, duration: 6, exit-code: 0 python -m pip install --upgrade --no-cache-dir pillow mock==1.0.1 alabaster>=0.7,<0.8,!=0.7.5 commonmark==0.9.1 recommonmark==0.5.0 sphinx<2 sphinx-rtd-theme<0.5 readthedocs-sphinx-ext<2.2 jinja2<3.1.0 Collecting pillow Downloading Pillow-9.2.0-cp37-cp37m-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (3.1 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.1/3.1 MB 61.1 MB/s eta 0:00:00 Collecting mock==1.0.1 Downloading mock-1.0.1.zip (861 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 861.9/861.9 kB 250.6 MB/s eta 0:00:00 Preparing metadata (setup.py): started Preparing metadata (setup.py): finished with status 'done' Collecting alabaster!=0.7.5,<0.8,>=0.7 Downloading alabaster-0.7.12-py2.py3-none-any.whl (14 kB) Collecting commonmark==0.9.1 Downloading commonmark-0.9.1-py2.py3-none-any.whl (51 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 51.1/51.1 kB 181.3 MB/s eta 0:00:00 Collecting recommonmark==0.5.0 Downloading recommonmark-0.5.0-py2.py3-none-any.whl (9.8 kB) Collecting sphinx<2 Downloading Sphinx-1.8.6-py2.py3-none-any.whl (3.1 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.1/3.1 MB 201.4 MB/s eta 0:00:00 Collecting sphinx-rtd-theme<0.5 Downloading sphinx_rtd_theme-0.4.3-py2.py3-none-any.whl (6.4 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 6.4/6.4 MB 208.2 MB/s eta 0:00:00 Collecting readthedocs-sphinx-ext<2.2 Downloading readthedocs_sphinx_ext-2.1.8-py2.py3-none-any.whl (11 kB) Collecting jinja2<3.1.0 Downloading Jinja2-3.0.3-py3-none-any.whl (133 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 133.6/133.6 kB 221.3 MB/s eta 0:00:00 Collecting docutils>=0.11 Downloading docutils-0.19-py3-none-any.whl (570 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 570.5/570.5 kB 216.9 MB/s eta 0:00:00 Collecting packaging Downloading packaging-21.3-py3-none-any.whl (40 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 40.8/40.8 kB 158.0 MB/s eta 0:00:00 Collecting babel!=2.0,>=1.3 Downloading Babel-2.10.3-py3-none-any.whl (9.5 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 9.5/9.5 MB 195.0 MB/s eta 0:00:00 Collecting sphinxcontrib-websupport Downloading sphinxcontrib_websupport-1.2.4-py2.py3-none-any.whl (39 kB) Collecting imagesize Downloading imagesize-1.4.1-py2.py3-none-any.whl (8.8 kB) Collecting requests>=2.0.0 Downloading requests-2.28.1-py3-none-any.whl (62 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 62.8/62.8 kB 193.3 MB/s eta 0:00:00 Collecting docutils>=0.11 Downloading docutils-0.17.1-py2.py3-none-any.whl (575 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 575.5/575.5 kB 237.0 MB/s eta 0:00:00 Requirement already satisfied: setuptools in /home/docs/checkouts/readthedocs.org/user_builds/metalsoft-metalsoft-docs/envs/latest/lib/python3.7/site-packages (from sphinx<2) (58.2.0) Collecting Pygments>=2.0 Downloading Pygments-2.13.0-py3-none-any.whl (1.1 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.1/1.1 MB 244.3 MB/s eta 0:00:00 Collecting six>=1.5 Downloading six-1.16.0-py2.py3-none-any.whl (11 kB) Collecting snowballstemmer>=1.1 Downloading snowballstemmer-2.2.0-py2.py3-none-any.whl (93 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 93.0/93.0 kB 210.3 MB/s eta 0:00:00 Collecting MarkupSafe>=2.0 Downloading MarkupSafe-2.1.1-cp37-cp37m-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (25 kB) Collecting pytz>=2015.7 Downloading pytz-2022.2.1-py2.py3-none-any.whl (500 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 500.6/500.6 kB 237.8 MB/s eta 0:00:00 Collecting idna<4,>=2.5 Downloading idna-3.3-py3-none-any.whl (61 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 61.2/61.2 kB 199.8 MB/s eta 0:00:00 Collecting charset-normalizer<3,>=2 Downloading charset_normalizer-2.1.1-py3-none-any.whl (39 kB) Collecting urllib3<1.27,>=1.21.1 Downloading urllib3-1.26.12-py2.py3-none-any.whl (140 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 140.4/140.4 kB 211.0 MB/s eta 0:00:00 Collecting certifi>=2017.4.17 Downloading certifi-2022.6.15-py3-none-any.whl (160 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 160.2/160.2 kB 231.5 MB/s eta 0:00:00 Collecting pyparsing!=3.0.5,>=2.0.2 Downloading pyparsing-3.0.9-py3-none-any.whl (98 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 98.3/98.3 kB 202.0 MB/s eta 0:00:00 Collecting sphinxcontrib-serializinghtml Downloading sphinxcontrib_serializinghtml-1.1.5-py2.py3-none-any.whl (94 kB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 94.0/94.0 kB 217.7 MB/s eta 0:00:00 Building wheels for collected packages: mock Building wheel for mock (setup.py): started Building wheel for mock (setup.py): finished with status 'done' Created wheel for mock: filename=mock-1.0.1-py3-none-any.whl size=23773 sha256=2c02ca09692618b9af2e0f540dd539a4d17e8edbcb97c7ad2596c4ae81f8b2c4 Stored in directory: /tmp/pip-ephem-wheel-cache-ki8a4m4e/wheels/7a/94/b1/0fdc5339a5bd487a5cc15421ec200d9ba3e2aa7190e4a727f1 Successfully built mock Installing collected packages: snowballstemmer, pytz, mock, commonmark, alabaster, urllib3, sphinxcontrib-serializinghtml, six, pyparsing, Pygments, pillow, MarkupSafe, imagesize, idna, docutils, charset-normalizer, certifi, babel, sphinxcontrib-websupport, requests, packaging, jinja2, sphinx, readthedocs-sphinx-ext, sphinx-rtd-theme, recommonmark Successfully installed MarkupSafe-2.1.1 Pygments-2.13.0 alabaster-0.7.12 babel-2.10.3 certifi-2022.6.15 charset-normalizer-2.1.1 commonmark-0.9.1 docutils-0.17.1 idna-3.3 imagesize-1.4.1 jinja2-3.0.3 mock-1.0.1 packaging-21.3 pillow-9.2.0 pyparsing-3.0.9 pytz-2022.2.1 readthedocs-sphinx-ext-2.1.8 recommonmark-0.5.0 requests-2.28.1 six-1.16.0 snowballstemmer-2.2.0 sphinx-1.8.6 sphinx-rtd-theme-0.4.3 sphinxcontrib-serializinghtml-1.1.5 sphinxcontrib-websupport-1.2.4 urllib3-1.26.12 [rtd-command-info] start-time: 2022-08-31T10:27:50.762979Z, end-time: 2022-08-31T10:27:51.546687Z, duration: 0, exit-code: 0 python -m pip install --exists-action=w --no-cache-dir -r requirements.txt Requirement already satisfied: docutils<0.18 in /home/docs/checkouts/readthedocs.org/user_builds/metalsoft-metalsoft-docs/envs/latest/lib/python3.7/site-packages (from -r requirements.txt (line 1)) (0.17.1) [rtd-command-info] start-time: 2022-08-31T10:27:53.272332Z, end-time: 2022-08-31T10:27:53.340569Z, duration: 0, exit-code: 0 cat conf.py # -*- coding: utf-8 -*- # # Configuration file for the Sphinx documentation builder. # # This file does only contain a selection of the most common options. For a # full list see the documentation: # http://www.sphinx-doc.org/en/master/config # -- Path setup -------------------------------------------------------------- # If extensions (or modules to document with autodoc) are in another directory, # add these directories to sys.path here. If the directory is relative to the # documentation root, use os.path.abspath to make it absolute, like shown here. # # import os # import sys # sys.path.insert(0, os.path.abspath('.')) # -- Project information ----------------------------------------------------- project = u'MetalSoft' copyright = u'2022, MetalSoft' author = u'Alex Bordei' # The short X.Y version version = u'' # The full version, including alpha/beta/rc tags release = u'v4.10.1' # -- General configuration --------------------------------------------------- # If your documentation needs a minimal Sphinx version, state it here. # # needs_sphinx = '1.0' # Add any Sphinx extension module names here, as strings. They can be # extensions coming with Sphinx (named 'sphinx.ext.*') or your custom # ones. extensions = [ 'sphinx.ext.imgmath', 'sphinx.ext.githubpages', 'recommonmark', ] # Add any paths that contain templates here, relative to this directory. templates_path = ['_templates'] # The suffix(es) of source filenames. # You can specify multiple suffix as a list of string: # source_suffix = ['.rst', '.md', '.txt'] # The master toctree document. master_doc = 'index' # The language for content autogenerated by Sphinx. Refer to documentation # for a list of supported languages. # # This is also used if you do content translation via gettext catalogs. # Usually you set "language" from the command line for these cases. language = None # List of patterns, relative to source directory, that match files and # directories to ignore when looking for source files. # This pattern also affects html_static_path and html_extra_path. exclude_patterns = [u'_build', 'Thumbs.db', '.DS_Store','scripts',"README.md"] # The name of the Pygments (syntax highlighting) style to use. pygments_style = None html_extra_path = ["others"] # -- Options for HTML output ------------------------------------------------- # The theme to use for HTML and HTML Help pages. See the documentation for # a list of builtin themes. # #html_theme = "sphinx_rtd_theme" html_theme = "default" # Theme options are theme-specific and customize the look and feel of a theme # further. For a list of options available for each theme, see the # documentation. # #html_theme_options = { # 'collapse_navigation': False, # 'display_version': False, # 'navigation_depth': 3, #} # Add any paths that contain custom static files (such as style sheets) here, # relative to this directory. They are copied after the builtin static files, # so a file named "default.css" will overwrite the builtin "default.css". html_static_path = ['_static'] # Custom sidebar templates, must be a dictionary that maps document names # to template names. # # The default sidebars (for documents that don't match any pattern) are # defined by theme itself. Builtin themes are using these templates by # default: ``['localtoc.html', 'relations.html', 'sourcelink.html', # 'searchbox.html']``. # # html_sidebars = {} # -- Options for HTMLHelp output --------------------------------------------- # Output file base name for HTML help builder. htmlhelp_basename = 'metalsoftdoc' # -- Options for LaTeX output ------------------------------------------------ latex_elements = { # The paper size ('letterpaper' or 'a4paper'). # # 'papersize': 'letterpaper', # The font size ('10pt', '11pt' or '12pt'). # # 'pointsize': '10pt', # Additional stuff for the LaTeX preamble. # # 'preamble': '', # Latex figure (float) alignment # # 'figure_align': 'htbp', } # Grouping the document tree into LaTeX files. List of tuples # (source start file, target name, title, # author, documentclass [howto, manual, or own class]). latex_documents = [ (master_doc, 'metalsoft.tex', u'metalsoft Documentation', u'Alex Bordei', 'manual'), ] # -- Options for manual page output ------------------------------------------ # One entry per manual page. List of tuples # (source start file, name, description, authors, manual section). man_pages = [ (master_doc, 'metalsoft', u'metalsoft Documentation', [author], 1) ] # -- Options for Texinfo output ---------------------------------------------- # Grouping the document tree into Texinfo files. List of tuples # (source start file, target name, title, author, # dir menu entry, description, category) texinfo_documents = [ (master_doc, 'metalsoft', u'metalsoft Documentation', author, 'metalsoft', 'One line description of project.', 'Miscellaneous'), ] # -- Options for Epub output ------------------------------------------------- # Bibliographic Dublin Core info. epub_title = project # The unique identifier of the text. This can be a ISBN number # or the project homepage. # # epub_identifier = '' # A unique identification for the text. # # epub_uid = '' # A list of files that should not be packed into the epub file. epub_exclude_files = ['search.html'] # -- Extension configuration ------------------------------------------------- ########################################################################### # auto-created readthedocs.org specific configuration # ########################################################################### # # The following code was added during an automated build on readthedocs.org # It is auto created and injected for every build. The result is based on the # conf.py.tmpl file found in the readthedocs.org codebase: # https://github.com/rtfd/readthedocs.org/blob/main/readthedocs/doc_builder/templates/doc_builder/conf.py.tmpl # # Note: this file shouldn't rely on extra dependencies. import importlib import sys import os.path # Borrowed from six. PY3 = sys.version_info[0] == 3 string_types = str if PY3 else basestring from sphinx import version_info # Get suffix for proper linking to GitHub # This is deprecated in Sphinx 1.3+, # as each page can have its own suffix if globals().get('source_suffix', False): if isinstance(source_suffix, string_types): SUFFIX = source_suffix elif isinstance(source_suffix, (list, tuple)): # Sphinx >= 1.3 supports list/tuple to define multiple suffixes SUFFIX = source_suffix[0] elif isinstance(source_suffix, dict): # Sphinx >= 1.8 supports a mapping dictionary for multiple suffixes SUFFIX = list(source_suffix.keys())[0] # make a ``list()`` for py2/py3 compatibility else: # default to .rst SUFFIX = '.rst' else: SUFFIX = '.rst' # Add RTD Static Path. Add to the end because it overwrites previous files. if not 'html_static_path' in globals(): html_static_path = [] if os.path.exists('_static'): html_static_path.append('_static') # Add RTD Theme only if they aren't overriding it already using_rtd_theme = ( ( 'html_theme' in globals() and html_theme in ['default'] and # Allow people to bail with a hack of having an html_style 'html_style' not in globals() ) or 'html_theme' not in globals() ) if using_rtd_theme: theme = importlib.import_module('sphinx_rtd_theme') html_theme = 'sphinx_rtd_theme' html_style = None html_theme_options = {} if 'html_theme_path' in globals(): html_theme_path.append(theme.get_html_theme_path()) else: html_theme_path = [theme.get_html_theme_path()] if globals().get('websupport2_base_url', False): websupport2_base_url = 'https://readthedocs.com/websupport' websupport2_static_url = 'https://assets.readthedocs.com/' #Add project information to the template context. context = { 'using_theme': using_rtd_theme, 'html_theme': html_theme, 'current_version': "latest", 'version_slug': "latest", 'MEDIA_URL': "https://media.readthedocs.com/media/", 'STATIC_URL': "https://assets.readthedocs.com/", 'PRODUCTION_DOMAIN': "readthedocs.com", 'proxied_static_path': "/_/static/", 'versions': [ ("latest", "/en/latest/"), ], 'downloads': [ ], 'subprojects': [ ], 'slug': 'metalsoft-metalsoft-docs', 'name': u'Admin Documentation', 'rtd_language': u'en', 'programming_language': u'words', 'canonical_url': 'https://docs.metalsoft.io/en/latest/', 'analytics_code': 'None', 'single_version': False, 'conf_py_path': '/', 'api_host': 'https://readthedocs.com', 'github_user': 'metalsoft-io', 'proxied_api_host': '/_', 'github_repo': 'metalsoft-docs', 'github_version': 'master', 'display_github': True, 'bitbucket_user': 'None', 'bitbucket_repo': 'None', 'bitbucket_version': 'master', 'display_bitbucket': False, 'gitlab_user': 'None', 'gitlab_repo': 'None', 'gitlab_version': 'master', 'display_gitlab': False, 'READTHEDOCS': True, 'using_theme': (html_theme == "default"), 'new_theme': (html_theme == "sphinx_rtd_theme"), 'source_suffix': SUFFIX, 'ad_free': False, 'docsearch_disabled': False, 'user_analytics_code': '', 'global_analytics_code': 'UA-17997319-2', 'commit': '8e71dac2', } # For sphinx >=1.8 we can use html_baseurl to set the canonical URL. # https://www.sphinx-doc.org/en/master/usage/configuration.html#confval-html_baseurl if version_info >= (1, 8): if not globals().get('html_baseurl'): html_baseurl = context['canonical_url'] context['canonical_url'] = None if 'html_context' in globals(): html_context.update(context) else: html_context = context # Add custom RTD extension if 'extensions' in globals(): # Insert at the beginning because it can interfere # with other extensions. # See https://github.com/rtfd/readthedocs.org/pull/4054 extensions.insert(0, "readthedocs_ext.readthedocs") else: extensions = ["readthedocs_ext.readthedocs"] # Add External version warning banner to the external version documentation if 'branch' == 'external': extensions.insert(1, "readthedocs_ext.external_version_warning") readthedocs_vcs_url = 'None' readthedocs_build_url = 'https://readthedocs.com/projects/metalsoft-metalsoft-docs/builds/1076292/' project_language = 'en' # User's Sphinx configurations language_user = globals().get('language', None) latex_engine_user = globals().get('latex_engine', None) latex_elements_user = globals().get('latex_elements', None) # Remove this once xindy gets installed in Docker image and XINDYOPS # env variable is supported # https://github.com/rtfd/readthedocs-docker-images/pull/98 latex_use_xindy = False chinese = any([ language_user in ('zh_CN', 'zh_TW'), project_language in ('zh_CN', 'zh_TW'), ]) japanese = any([ language_user == 'ja', project_language == 'ja', ]) if chinese: latex_engine = latex_engine_user or 'xelatex' latex_elements_rtd = { 'preamble': '\\usepackage[UTF8]{ctex}\n', } latex_elements = latex_elements_user or latex_elements_rtd elif japanese: latex_engine = latex_engine_user or 'platex' # Make sure our build directory is always excluded exclude_patterns = globals().get('exclude_patterns', []) exclude_patterns.extend(['_build']) [rtd-command-info] start-time: 2022-08-31T10:27:53.581447Z, end-time: 2022-08-31T10:27:58.270266Z, duration: 4, exit-code: 0 python -m sphinx -T -E -b html -d _build/doctrees -D language=en . _build/html Running Sphinx v1.8.6 loading translations [en]... done making output directory... building [mo]: targets for 0 po files that are out of date building [html]: targets for 61 source files that are out of date updating environment: 61 added, 0 changed, 0 removed reading sources... [ 1%] advanced/configuring_https_repository_access reading sources... [ 3%] advanced/enabling_secondary_ips_and_vlans_on_the_wan_interface reading sources... [ 4%] advanced/enabling_traffic_accounting reading sources... [ 6%] advanced/managing_assets reading sources... [ 8%] advanced/managing_firmware reading sources... [ 9%] advanced/managing_operating_system_deployment_options reading sources... [ 11%] advanced/managing_os_templates reading sources... [ 13%] advanced/managing_stage_definitions reading sources... [ 14%] advanced/managing_variables_and_secrets reading sources... [ 16%] advanced/managing_workflows reading sources... [ 18%] advanced/the_afc_graph reading sources... [ 19%] advanced/using_infrastructures_with_workflows reading sources... [ 21%] advanced/vsphere_workflow_example reading sources... [ 22%] advanced/workflow_system_overview reading sources... [ 24%] general/IPAM reading sources... [ 26%] general/getting_started reading sources... [ 27%] general/introduction reading sources... [ 29%] general/networking_overview reading sources... [ 31%] general/release_notes reading sources... [ 32%] general/server_lifecycle reading sources... [ 34%] general/server_types reading sources... [ 36%] general/storage_architecture reading sources... [ 37%] guides/adding_a_network_profile reading sources... [ 39%] guides/adding_a_new_datacenter reading sources... [ 40%] guides/adding_a_new_server reading sources... [ 42%] guides/adding_a_new_storage_pool reading sources... [ 44%] guides/adding_a_new_subnet_pool reading sources... [ 45%] guides/adding_an_external_connection reading sources... [ 47%] guides/built_in_variables_glossary reading sources... [ 49%] guides/creating_a_local_install_template_from_scratch reading sources... [ 50%] guides/creating_an_iscsi_template_from_scratch reading sources... [ 52%] guides/custom_ipxe_image reading sources... [ 54%] guides/deploying_metalsoft reading sources... [ 55%] guides/deploying_metalsoft_agent reading sources... [ 57%] guides/deploying_metalsoft_controller reading sources... [ 59%] guides/deploying_metalsoft_on_a_flat_l2_network reading sources... [ 60%] guides/deploying_metalsoft_storage_appliance reading sources... [ 62%] guides/deploying_metalsoft_to_support_legacy_deployments reading sources... [ 63%] guides/hp2610_example_default_config reading sources... [ 65%] guides/hp5900_example_default_config reading sources... [ 67%] guides/managing_storage_pools reading sources... [ 68%] guides/re_registering_a_server reading sources... [ 70%] guides/retrieving_my_API_key reading sources... [ 72%] guides/troubleshooting_guide reading sources... [ 73%] guides/using_the_cli reading sources... [ 75%] guides/using_the_terraform_provider reading sources... [ 77%] index reading sources... [ 78%] requirements reading sources... [ 80%] user/advanced/creating_a_local_install_os_template reading sources... [ 81%] user/advanced/creating_an_iscsi_os_template reading sources... [ 83%] user/advanced/enabling_two_factor_authentication reading sources... [ 85%] user/advanced/forcing_specific_servers_at_deploy reading sources... [ 86%] user/advanced/manually_managing_iscsi_connections reading sources... [ 88%] user/advanced/pushing_ssh_keys_to_nodes_using_the_cli reading sources... [ 90%] user/advanced/setting_up_users_and_permissions_in_reseller_scenarios reading sources... [ 91%] user/guides/managing_drive_arrays reading sources... [ 93%] user/guides/managing_infrastructures reading sources... [ 95%] user/guides/managing_instance_arrays reading sources... [ 96%] user/guides/managing_networks reading sources... [ 98%] user/guides/managing_users_and_permissions reading sources... [100%] user/guides/retrieving_the_utilization_report looking for now-outdated files... none found pickling environment... done checking consistency... /home/docs/checkouts/readthedocs.org/user_builds/metalsoft-metalsoft-docs/envs/latest/lib/python3.7/site-packages/recommonmark/parser.py:65: UserWarning: Container node skipped: type=document warn("Container node skipped: type={0}".format(mdnode.t)) /home/docs/checkouts/readthedocs.org/user_builds/metalsoft-metalsoft-docs/checkouts/latest/general/release_notes.md: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/metalsoft-metalsoft-docs/checkouts/latest/guides/custom_ipxe_image.md: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/metalsoft-metalsoft-docs/checkouts/latest/guides/hp2610_example_default_config.md: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/metalsoft-metalsoft-docs/checkouts/latest/guides/hp5900_example_default_config.md: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/metalsoft-metalsoft-docs/checkouts/latest/requirements.txt: WARNING: document isn't included in any toctree /home/docs/checkouts/readthedocs.org/user_builds/metalsoft-metalsoft-docs/checkouts/latest/user/advanced/pushing_ssh_keys_to_nodes_using_the_cli.md: WARNING: document isn't included in any toctree done preparing documents... done writing output... [ 1%] advanced/configuring_https_repository_access writing output... [ 3%] advanced/enabling_secondary_ips_and_vlans_on_the_wan_interface writing output... [ 4%] advanced/enabling_traffic_accounting writing output... [ 6%] advanced/managing_assets writing output... [ 8%] advanced/managing_firmware writing output... [ 9%] advanced/managing_operating_system_deployment_options writing output... [ 11%] advanced/managing_os_templates writing output... [ 13%] advanced/managing_stage_definitions writing output... [ 14%] advanced/managing_variables_and_secrets writing output... [ 16%] advanced/managing_workflows writing output... [ 18%] advanced/the_afc_graph writing output... [ 19%] advanced/using_infrastructures_with_workflows writing output... [ 21%] advanced/vsphere_workflow_example writing output... [ 22%] advanced/workflow_system_overview writing output... [ 24%] general/IPAM writing output... [ 26%] general/getting_started writing output... [ 27%] general/introduction writing output... [ 29%] general/networking_overview writing output... [ 31%] general/release_notes writing output... [ 32%] general/server_lifecycle writing output... [ 34%] general/server_types writing output... [ 36%] general/storage_architecture writing output... [ 37%] guides/adding_a_network_profile writing output... [ 39%] guides/adding_a_new_datacenter writing output... [ 40%] guides/adding_a_new_server writing output... [ 42%] guides/adding_a_new_storage_pool writing output... [ 44%] guides/adding_a_new_subnet_pool writing output... [ 45%] guides/adding_an_external_connection writing output... [ 47%] guides/built_in_variables_glossary writing output... [ 49%] guides/creating_a_local_install_template_from_scratch writing output... [ 50%] guides/creating_an_iscsi_template_from_scratch writing output... [ 52%] guides/custom_ipxe_image writing output... [ 54%] guides/deploying_metalsoft writing output... [ 55%] guides/deploying_metalsoft_agent writing output... [ 57%] guides/deploying_metalsoft_controller writing output... [ 59%] guides/deploying_metalsoft_on_a_flat_l2_network writing output... [ 60%] guides/deploying_metalsoft_storage_appliance writing output... [ 62%] guides/deploying_metalsoft_to_support_legacy_deployments writing output... [ 63%] guides/hp2610_example_default_config writing output... [ 65%] guides/hp5900_example_default_config writing output... [ 67%] guides/managing_storage_pools writing output... [ 68%] guides/re_registering_a_server writing output... [ 70%] guides/retrieving_my_API_key writing output... [ 72%] guides/troubleshooting_guide writing output... [ 73%] guides/using_the_cli writing output... [ 75%] guides/using_the_terraform_provider writing output... [ 77%] index writing output... [ 78%] requirements writing output... [ 80%] user/advanced/creating_a_local_install_os_template writing output... [ 81%] user/advanced/creating_an_iscsi_os_template writing output... [ 83%] user/advanced/enabling_two_factor_authentication writing output... [ 85%] user/advanced/forcing_specific_servers_at_deploy writing output... [ 86%] user/advanced/manually_managing_iscsi_connections writing output... [ 88%] user/advanced/pushing_ssh_keys_to_nodes_using_the_cli writing output... [ 90%] user/advanced/setting_up_users_and_permissions_in_reseller_scenarios writing output... [ 91%] user/guides/managing_drive_arrays writing output... [ 93%] user/guides/managing_infrastructures writing output... [ 95%] user/guides/managing_instance_arrays writing output... [ 96%] user/guides/managing_networks writing output... [ 98%] user/guides/managing_users_and_permissions writing output... [100%] user/guides/retrieving_the_utilization_report /home/docs/checkouts/readthedocs.org/user_builds/metalsoft-metalsoft-docs/checkouts/latest/general/release_notes.md: WARNING: Pygments lexer name 'lang-none' is not known /home/docs/checkouts/readthedocs.org/user_builds/metalsoft-metalsoft-docs/checkouts/latest/general/release_notes.md: WARNING: Pygments lexer name 'lang-none' is not known /home/docs/checkouts/readthedocs.org/user_builds/metalsoft-metalsoft-docs/checkouts/latest/general/release_notes.md: WARNING: Pygments lexer name 'lang-none' is not known /home/docs/checkouts/readthedocs.org/user_builds/metalsoft-metalsoft-docs/checkouts/latest/general/release_notes.md: WARNING: Pygments lexer name 'lang-none' is not known /home/docs/checkouts/readthedocs.org/user_builds/metalsoft-metalsoft-docs/checkouts/latest/general/release_notes.md: WARNING: Pygments lexer name 'lang-none' is not known /home/docs/checkouts/readthedocs.org/user_builds/metalsoft-metalsoft-docs/checkouts/latest/general/release_notes.md: WARNING: Pygments lexer name 'lang-none' is not known /home/docs/checkouts/readthedocs.org/user_builds/metalsoft-metalsoft-docs/checkouts/latest/general/release_notes.md: WARNING: Pygments lexer name 'lang-none' is not known /home/docs/checkouts/readthedocs.org/user_builds/metalsoft-metalsoft-docs/checkouts/latest/guides/using_the_terraform_provider.md: WARNING: Could not lex literal_block as "javascript". Highlighting skipped. generating indices... genindex writing additional pages... search copying images... [ 0%] assets/advanced/enabling_secondary_ips_and_vlans_on_the_wan_interface_01.svg copying images... [ 1%] assets/advanced/enabling_secondary_ips_and_vlans_on_the_wan_interface_01.png copying images... [ 2%] assets/advanced/enabling_secondary_ips_and_vlans_on_the_wan_interface_02.png copying images... [ 2%] assets/advanced/managing_firmware1.png copying images... [ 3%] assets/advanced/managing_firmware2.png copying images... [ 4%] assets/advanced/managing_operating_system_deployment_options_01.png copying images... [ 5%] assets/advanced/managing_operating_system_deployment_options_02.png copying images... [ 5%] assets/guides/os_templates_1.svg copying images... [ 6%] assets/advanced/managing_workflows1.png copying images... [ 7%] assets/advanced/managing_workflows2.png copying images... [ 7%] assets/advanced/managing_workflows3.png copying images... [ 8%] assets/advanced/the_afc_graph_3.png copying images... [ 9%] assets/advanced/the_afc_graph_1.png copying images... [ 10%] assets/advanced/the_afc_graph_2.png copying images... [ 10%] assets/advanced/using_infrastructures_with_workflows_2.svg copying images... [ 11%] assets/advanced/workflow_overview_2.svg copying images... [ 12%] assets/advanced/using_infrastructures_with_workflows_1.png copying images... [ 12%] assets/advanced/workflow_overview_3.svg copying images... [ 13%] assets/general/ipam1.svg copying images... [ 14%] assets/general/ipam2.png copying images... [ 15%] assets/general/ipam4.svg copying images... [ 15%] assets/general/ipam5.svg copying images... [ 16%] assets/general/ipam6.svg copying images... [ 17%] assets/general/ipam7.svg copying images... [ 17%] assets/general/ipam8.svg copying images... [ 18%] assets/general/introduction-7.png copying images... [ 19%] assets/guides/getting_started3.png copying images... [ 20%] assets/general/create_new_instance_array_select_configuration.png copying images... [ 20%] assets/general/creating_new_instance_array_select_iscsi.png copying images... [ 21%] assets/guides/getting_started41.png copying images... [ 22%] assets/guides/getting_started7.png copying images... [ 22%] assets/guides/getting_started61.png copying images... [ 23%] assets/user/guides/managing_instance_arrays1.png copying images... [ 24%] assets/user/guides/managing_instance_arrays2.png copying images... [ 25%] assets/general/introduction-3.svg copying images... [ 25%] assets/general/allocated_server.png copying images... [ 26%] assets/general/servers_page.png copying images... [ 27%] assets/general/architecture-1.svg copying images... [ 27%] assets/general/infrastructure_editor.png copying images... [ 28%] assets/general/admin_interface.png copying images... [ 29%] assets/general/networking_architecture_2.svg copying images... [ 30%] assets/general/server_status_list.png copying images... [ 30%] assets/general/server_status_buttons.png copying images... [ 31%] assets/general/re-register_or_decomission.png copying images... [ 32%] assets/general/server_lifecycle_1.svg copying images... [ 32%] assets/general/server_lifecycle_2.svg copying images... [ 33%] assets/general/server_lifecycle_3.svg copying images... [ 34%] assets/general/defective.png copying images... [ 35%] assets/general/notes.png copying images... [ 35%] assets/general/available.png copying images... [ 36%] assets/general/server_lifecycle_4.svg copying images... [ 37%] assets/general/create_server_type.png copying images... [ 37%] assets/general/storage_architecture_1.svg copying images... [ 38%] assets/guides/add_network_profile_5.svg copying images... [ 39%] assets/guides/add_network_profile_1.png copying images... [ 40%] assets/guides/add_network_profile_2.png copying images... [ 40%] assets/guides/add_network_profile_3.png copying images... [ 41%] assets/guides/add_network_profile_4.png copying images... [ 42%] assets/guides/add_a_new_datacenter.png copying images... [ 42%] assets/guides/add_a_new_storage_pool.svg copying images... [ 43%] assets/guides/adding_a_subnet_pool.svg copying images... [ 44%] assets/guides/adding_external_conenctions_1.png copying images... [ 45%] assets/guides/add_external_connections_2.png copying images... [ 45%] assets/guides/add_external_connections_4.jpg copying images... [ 46%] assets/guides/add_external_connections_3.jpg copying images... [ 47%] assets/guides/creating_an_os_template_from_scratch_03.png copying images... [ 47%] assets/guides/creating_an_os_template_from_scratch_01.png copying images... [ 48%] assets/guides/creating_an_os_template_from_scratch_04.png copying images... [ 49%] assets/guides/deploying_metalsoft_02.png copying images... [ 50%] assets/guides/servers_page_servers_available.png copying images... [ 50%] assets/guides/deploying_metalsoft_on_l2_01.svg copying images... [ 51%] assets/guides/preparing_to_setup_a_datacenter_01.svg copying images... [ 52%] assets/advanced/pool_layout.png copying images... [ 52%] assets/guides/preparing_to_setup_a_datacenter_02.svg copying images... [ 53%] assets/guides/managing_storage_pools.png copying images... [ 54%] assets/guides/servers_with_iscsi_booting.png copying images... [ 55%] assets/guides/re-registering-a-server-01.png copying images... [ 55%] assets/guides/re-registering-a-server-02.png copying images... [ 56%] assets/guides/re-registering-a-server-03.png copying images... [ 57%] assets/guides/retrieving_my_api_key_1.png copying images... [ 57%] assets/guides/retrieving_my_api_key_02.png copying images... [ 58%] assets/metalsoft-logo.svg copying images... [ 59%] assets/user/advanced/os_templates_1.svg copying images... [ 60%] assets/user/advanced/creating_custom_template1.svg copying images... [ 60%] assets/user/advanced/enabling_2fa2.png copying images... [ 61%] assets/user/advanced/enabling_2fa5.png copying images... [ 62%] assets/user/advanced/enabling_2fa31.png copying images... [ 62%] assets/user/advanced/enabling_2fa6.png copying images... [ 63%] assets/user/advanced/enabling_2fa7.png copying images... [ 64%] assets/user/advanced/enabling_2fa4.png copying images... [ 65%] assets/user/advanced/enabling_2fa9.png copying images... [ 65%] assets/user/advanced/enabling_2fa8.png copying images... [ 66%] assets/user/advanced/enabling_2fa10.png copying images... [ 67%] assets/user/advanced/enabling_2fa13.png copying images... [ 67%] assets/user/guides/managing_drive_arrays3.png copying images... [ 68%] assets/user/advanced/setting_up_users_and_permissions_in_reseller_scenarios_2.svg copying images... [ 69%] assets/user/advanced/setting_up_users_and_permissions_in_reseller_scenarios_3.svg copying images... [ 70%] assets/user/advanced/setting_up_users_and_permissions_in_reseller_scenarios_5.svg copying images... [ 70%] assets/user/advanced/setting_up_users_and_permissions_in_reseller_scenarios_4.svg copying images... [ 71%] assets/user/advanced/setting_up_users_and_permissions_in_reseller_scenarios_1.svg copying images... [ 72%] assets/user/guides/managing_drive_arrays1.png copying images... [ 72%] assets/user/guides/managing_drive_arrays2.png copying images... [ 73%] assets/user/guides/drive_management_1.png copying images... [ 74%] assets/user/guides/drive_management_2.png copying images... [ 75%] assets/user/guides/drive_management_3.png copying images... [ 75%] assets/user/guides/drive_management_4.png copying images... [ 76%] assets/user/guides/drive_management_5.png copying images... [ 77%] assets/user/guides/drive_management_6.png copying images... [ 77%] assets/user/guides/drive_management_7.png copying images... [ 78%] assets/user/guides/drive_management_8.png copying images... [ 79%] assets/user/guides/drive_management_9.png copying images... [ 80%] assets/user/guides/drive_management_10.png copying images... [ 80%] assets/user/guides/drive_management_11.png copying images... [ 81%] assets/user/guides/drive_management_12.png copying images... [ 82%] assets/user/guides/creating_an_infrastructure1.png copying images... [ 82%] assets/user/guides/creating_an_infrastructure2.png copying images... [ 83%] assets/user/guides/managing_infrastructures1.png copying images... [ 84%] assets/user/guides/getting_started3.png copying images... [ 85%] assets/user/guides/getting_started5.png copying images... [ 85%] assets/user/guides/getting_started41.png copying images... [ 86%] assets/user/guides/getting_started61.png copying images... [ 87%] assets/guides/network_join.gif copying images... [ 87%] assets/guides/network_create_2.png copying images... [ 88%] assets/guides/network_create.gif copying images... [ 89%] assets/guides/network_create_03.png copying images... [ 90%] assets/guides/add_more_ips.png copying images... [ 90%] assets/guides/add_subnet_01.png copying images... [ 91%] assets/guides/add_subnet_02.png copying images... [ 92%] assets/user/guides/managing_users_and_permissions_1.svg copying images... [ 92%] assets/user/guides/managing_users_and_permissions_2.png copying images... [ 93%] assets/user/guides/managing_users_and_permissions_3.png copying images... [ 94%] assets/user/guides/managing_users_and_permissions_4.png copying images... [ 95%] assets/user/guides/managing_users_and_permissions_5.png copying images... [ 95%] assets/user/guides/managing_users_and_permissions_6.png copying images... [ 96%] assets/user/guides/managing_billing_information_2.png copying images... [ 97%] assets/user/guides/the_utilization_report_2.png copying images... [ 97%] assets/user/guides/the_utilization_report_1.png copying images... [ 98%] assets/user/guides/the_detailed_utilization_report_2.png copying images... [ 99%] assets/user/guides/the_detailed_utilization_report_3.png copying images... [100%] assets/user/guides/understanding_the_utilization_report_4.png copying static files... done copying extra files... done dumping search index in English (code: en) ... done dumping object inventory... done build succeeded, 14 warnings. The HTML pages are in _build/html. Updating searchtools for Read the Docs search...